Strukturering · Why do parts that passed inspection come back?

SPØRSMÅLET

Why do parts that passed inspection come back?

Påvirker det ene det andre i betydelig grad? Tre firedeler av de avgitte stemmene avgjør.

Du ser på som gjest. Skriv inn et brukernavn for å bli med og delta.

Spørsmålene fordeles mellom gruppene, så du får dem gruppen din ble tildelt — ikke alle 180.

hvorfor

Ingen kunne svart på flere hundre par. Hvert par går til én gruppe; et par som deler gruppen, sendes så videre til andre grupper, så det kan dukke opp i listen din senere selv om det startet et annet sted. Antallet avgjorte omfatter alle gruppenes arbeid, og derfor stiger det raskere enn din egen liste krymper.

avgjort: 176 / 180 til deg å svare på: 0

Siste opptelling: avgjort 176 · sendt videre til paneler på tvers av grupper 1 · omstridt 0 · under kvorum 3 — paneler trenger minst max(2, 75% av panelet) avgitte stemmer; ditt minste panel har 15 medlemmer.

lukk ✕

Maintenance is done when a machine stops → påvirker? → Deburring is done by whoever is free

Ingenting sagt ennå.

Fullført fase — protokollen over par og stemmer står ovenfor.Sjekk logikken ↗

Batch traceability ends at the door	→	Temperature in the shop swings fifteen degrees between morning and afternoon	åpent	diskuter
…	→	Deburring is done by whoever is free	åpent sendt videre	diskuter
Setup sheets are in the setter's head, not on paper	→	New jobs are quoted from the last similar job, not from the drawing	åpent	diskuter
Maintenance is done when a machine stops	→	The customer's returns log and ours do not match	åpent	diskuter
Rework is not counted anywhere	→	Quotes are won on price, so cycle times are cut to the bone	✓ ja	diskuter
Customers changed their inspection method and never told us	→	Operators are paid on parts per hour	✓ ja	diskuter
Customers changed their inspection method and never told us	→	Coolant is changed when it smells, not on a schedule	✓ ja	diskuter
Quotes are won on price, so cycle times are cut to the bone	→	The oldest machine makes the tightest-tolerance part	✓ ja	diskuter
Quotes are won on price, so cycle times are cut to the bone	→	Operators are paid on parts per hour	✓ ja	diskuter
The same operator runs the same machine for years and nobody checks the settings	→	The drawing on the floor is not the revision the customer ordered	✓ ja	diskuter
Tool wear is judged by ear	→	Deburring is done by whoever is free	✓ ja	diskuter
Deburring is done by whoever is free	→	Parts that pass our inspection fail the customer's	✓ ja	diskuter
Parts that pass our inspection fail the customer's	→	The customer's returns log and ours do not match	✓ ja	diskuter
Deburring is done by whoever is free	→	The customer's returns log and ours do not match	✓ utledet	diskuter
Quotes are won on price, so cycle times are cut to the bone	→	Coolant is changed when it smells, not on a schedule	✗ nei	diskuter
Temperature in the shop swings fifteen degrees between morning and afternoon	→	Quotes are won on price, so cycle times are cut to the bone	✗ nei	diskuter
Coolant is changed when it smells, not on a schedule	→	Quotes are won on price, so cycle times are cut to the bone	✗ nei	diskuter
The same operator runs the same machine for years and nobody checks the settings	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ nei	diskuter
Rework is not counted anywhere	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ nei	diskuter
Rework is not counted anywhere	→	Customers changed their inspection method and never told us	✗ nei	diskuter
The drawing on the floor is not the revision the customer ordered	→	The same operator runs the same machine for years and nobody checks the settings	✗ nei	diskuter
The drawing on the floor is not the revision the customer ordered	→	The oldest machine makes the tightest-tolerance part	✗ nei	diskuter
The drawing on the floor is not the revision the customer ordered	→	Coolant is changed when it smells, not on a schedule	✗ nei	diskuter
The drawing on the floor is not the revision the customer ordered	→	Batch traceability ends at the door	✗ nei	diskuter
Customers changed their inspection method and never told us	→	The oldest machine makes the tightest-tolerance part	✗ nei	diskuter
Coolant is changed when it smells, not on a schedule	→	Customers changed their inspection method and never told us	✗ nei	diskuter
The same operator runs the same machine for years and nobody checks the settings	→	Quotes are won on price, so cycle times are cut to the bone	✗ nei	diskuter
Rework is not counted anywhere	→	The oldest machine makes the tightest-tolerance part	✗ nei	diskuter
Temperature in the shop swings fifteen degrees between morning and afternoon	→	Operators are paid on parts per hour	✗ nei	diskuter
The same operator runs the same machine for years and nobody checks the settings	→	Operators are paid on parts per hour	✗ nei	diskuter
Batch traceability ends at the door	→	Quotes are won on price, so cycle times are cut to the bone	✗ nei	diskuter
The drawing on the floor is not the revision the customer ordered	→	Customers changed their inspection method and never told us	✗ nei	diskuter
Quotes are won on price, so cycle times are cut to the bone	→	Customers changed their inspection method and never told us	✗ nei	diskuter
Temperature in the shop swings fifteen degrees between morning and afternoon	→	The oldest machine makes the tightest-tolerance part	✗ nei	diskuter
Rework is not counted anywhere	→	Batch traceability ends at the door	✗ nei	diskuter
The oldest machine makes the tightest-tolerance part	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ nei	diskuter
Coolant is changed when it smells, not on a schedule	→	The oldest machine makes the tightest-tolerance part	✗ nei	diskuter
Operators are paid on parts per hour	→	The drawing on the floor is not the revision the customer ordered	✗ nei	diskuter
The drawing on the floor is not the revision the customer ordered	→	Quotes are won on price, so cycle times are cut to the bone	✗ nei	diskuter
Customers changed their inspection method and never told us	→	The drawing on the floor is not the revision the customer ordered	✗ nei	diskuter
Quotes are won on price, so cycle times are cut to the bone	→	Rework is not counted anywhere	✗ nei	diskuter
Customers changed their inspection method and never told us	→	Rework is not counted anywhere	✗ nei	diskuter
Quotes are won on price, so cycle times are cut to the bone	→	Batch traceability ends at the door	✗ nei	diskuter
The drawing on the floor is not the revision the customer ordered	→	Rework is not counted anywhere	✗ nei	diskuter
Operators are paid on parts per hour	→	Rework is not counted anywhere	✗ nei	diskuter
The oldest machine makes the tightest-tolerance part	→	Coolant is changed when it smells, not on a schedule	✗ nei	diskuter
Coolant is changed when it smells, not on a schedule	→	Batch traceability ends at the door	✗ nei	diskuter
Customers changed their inspection method and never told us	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ nei	diskuter
Customers changed their inspection method and never told us	→	Batch traceability ends at the door	✗ nei	diskuter
Temperature in the shop swings fifteen degrees between morning and afternoon	→	Batch traceability ends at the door	✗ nei	diskuter
Temperature in the shop swings fifteen degrees between morning and afternoon	→	Coolant is changed when it smells, not on a schedule	✗ nei	diskuter
Batch traceability ends at the door	→	The oldest machine makes the tightest-tolerance part	✗ nei	diskuter
Coolant is changed when it smells, not on a schedule	→	Rework is not counted anywhere	✗ nei	diskuter
The oldest machine makes the tightest-tolerance part	→	The same operator runs the same machine for years and nobody checks the settings	✗ nei	diskuter
Operators are paid on parts per hour	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ nei	diskuter
The same operator runs the same machine for years and nobody checks the settings	→	Customers changed their inspection method and never told us	✗ nei	diskuter
Batch traceability ends at the door	→	Coolant is changed when it smells, not on a schedule	✗ nei	diskuter
Operators are paid on parts per hour	→	Customers changed their inspection method and never told us	✗ nei	diskuter
Batch traceability ends at the door	→	Customers changed their inspection method and never told us	✗ nei	diskuter
Rework is not counted anywhere	→	The drawing on the floor is not the revision the customer ordered	✗ nei	diskuter
Operators are paid on parts per hour	→	The oldest machine makes the tightest-tolerance part	✗ nei	diskuter
Operators are paid on parts per hour	→	The same operator runs the same machine for years and nobody checks the settings	✗ nei	diskuter
The oldest machine makes the tightest-tolerance part	→	Rework is not counted anywhere	✗ nei	diskuter
Temperature in the shop swings fifteen degrees between morning and afternoon	→	The same operator runs the same machine for years and nobody checks the settings	✗ nei	diskuter
Batch traceability ends at the door	→	Operators are paid on parts per hour	✗ nei	diskuter
Temperature in the shop swings fifteen degrees between morning and afternoon	→	Customers changed their inspection method and never told us	✗ nei	diskuter
Coolant is changed when it smells, not on a schedule	→	The drawing on the floor is not the revision the customer ordered	✗ nei	diskuter
Operators are paid on parts per hour	→	Batch traceability ends at the door	✗ nei	diskuter
The oldest machine makes the tightest-tolerance part	→	Operators are paid on parts per hour	✗ nei	diskuter
Quotes are won on price, so cycle times are cut to the bone	→	The drawing on the floor is not the revision the customer ordered	✗ nei	diskuter
The oldest machine makes the tightest-tolerance part	→	The drawing on the floor is not the revision the customer ordered	✗ nei	diskuter
Temperature in the shop swings fifteen degrees between morning and afternoon	→	Rework is not counted anywhere	✗ nei	diskuter
Operators are paid on parts per hour	→	Quotes are won on price, so cycle times are cut to the bone	✗ nei	diskuter
The oldest machine makes the tightest-tolerance part	→	Quotes are won on price, so cycle times are cut to the bone	✗ nei	diskuter
The oldest machine makes the tightest-tolerance part	→	Batch traceability ends at the door	✗ nei	diskuter
Rework is not counted anywhere	→	Operators are paid on parts per hour	✗ nei	diskuter
Coolant is changed when it smells, not on a schedule	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ nei	diskuter
The same operator runs the same machine for years and nobody checks the settings	→	Batch traceability ends at the door	✗ nei	diskuter
Coolant is changed when it smells, not on a schedule	→	The same operator runs the same machine for years and nobody checks the settings	✗ nei	diskuter
Quotes are won on price, so cycle times are cut to the bone	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ nei	diskuter
The same operator runs the same machine for years and nobody checks the settings	→	Rework is not counted anywhere	✗ nei	diskuter
Customers changed their inspection method and never told us	→	The same operator runs the same machine for years and nobody checks the settings	✗ nei	diskuter
Rework is not counted anywhere	→	Coolant is changed when it smells, not on a schedule	✗ nei	diskuter
Rework is not counted anywhere	→	The same operator runs the same machine for years and nobody checks the settings	✗ nei	diskuter
The drawing on the floor is not the revision the customer ordered	→	Operators are paid on parts per hour	✗ nei	diskuter
The same operator runs the same machine for years and nobody checks the settings	→	The oldest machine makes the tightest-tolerance part	✗ nei	diskuter
Operators are paid on parts per hour	→	Coolant is changed when it smells, not on a schedule	✗ nei	diskuter
The same operator runs the same machine for years and nobody checks the settings	→	Coolant is changed when it smells, not on a schedule	✗ nei	diskuter
The oldest machine makes the tightest-tolerance part	→	Customers changed their inspection method and never told us	✗ nei	diskuter
Batch traceability ends at the door	→	The same operator runs the same machine for years and nobody checks the settings	✗ nei	diskuter
The drawing on the floor is not the revision the customer ordered	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ nei	diskuter
Coolant is changed when it smells, not on a schedule	→	Operators are paid on parts per hour	✗ nei	diskuter
Customers changed their inspection method and never told us	→	Quotes are won on price, so cycle times are cut to the bone	✗ nei	diskuter
Temperature in the shop swings fifteen degrees between morning and afternoon	→	The drawing on the floor is not the revision the customer ordered	✗ nei	diskuter
Batch traceability ends at the door	→	Rework is not counted anywhere	✗ nei	diskuter
Batch traceability ends at the door	→	The drawing on the floor is not the revision the customer ordered	✗ nei	diskuter
Quotes are won on price, so cycle times are cut to the bone	→	The same operator runs the same machine for years and nobody checks the settings	✗ nei	diskuter
Deburring is done by whoever is free	→	Setup sheets are in the setter's head, not on paper	✗ nei	diskuter
Deburring is done by whoever is free	→	First-off inspection is skipped when the job is late	✗ nei	diskuter
New jobs are quoted from the last similar job, not from the drawing	→	First-off inspection is skipped when the job is late	✗ nei	diskuter
Deburring is done by whoever is free	→	…	✗ nei	diskuter
First-off inspection is skipped when the job is late	→	…	✗ nei	diskuter
The customer's returns log and ours do not match	→	…	✗ nei	diskuter
Setup sheets are in the setter's head, not on paper	→	Maintenance is done when a machine stops	✗ nei	diskuter
…	→	…	✗ nei	diskuter
Maintenance is done when a machine stops	→	Deburring is done by whoever is free	✗ nei	i fokus ↑ · lukk ✕
The customer's returns log and ours do not match	→	Maintenance is done when a machine stops	✗ nei	diskuter
Setup sheets are in the setter's head, not on paper	→	…	✗ nei	diskuter
Deburring is done by whoever is free	→	Tool wear is judged by ear	✗ nei	diskuter
…	→	Parts that pass our inspection fail the customer's	✗ nei	diskuter
Tool wear is judged by ear	→	New jobs are quoted from the last similar job, not from the drawing	✗ nei	diskuter
New jobs are quoted from the last similar job, not from the drawing	→	…	✗ nei	diskuter
The customer's returns log and ours do not match	→	First-off inspection is skipped when the job is late	✗ nei	diskuter
…	→	New jobs are quoted from the last similar job, not from the drawing	✗ nei	diskuter
Setup sheets are in the setter's head, not on paper	→	Tool wear is judged by ear	✗ nei	diskuter
The customer's returns log and ours do not match	→	Parts that pass our inspection fail the customer's	✗ nei	diskuter
Parts that pass our inspection fail the customer's	→	Deburring is done by whoever is free	✗ nei	diskuter
Tool wear is judged by ear	→	Maintenance is done when a machine stops	✗ nei	diskuter
…	→	Tool wear is judged by ear	✗ nei	diskuter
First-off inspection is skipped when the job is late	→	Deburring is done by whoever is free	✗ nei	diskuter
…	→	The customer's returns log and ours do not match	✗ nei	diskuter
Tool wear is judged by ear	→	Parts that pass our inspection fail the customer's	✗ nei	diskuter
The customer's returns log and ours do not match	→	Tool wear is judged by ear	✗ nei	diskuter
Tool wear is judged by ear	→	…	✗ nei	diskuter
Maintenance is done when a machine stops	→	Setup sheets are in the setter's head, not on paper	✗ nei	diskuter
First-off inspection is skipped when the job is late	→	Maintenance is done when a machine stops	✗ nei	diskuter
The customer's returns log and ours do not match	→	Deburring is done by whoever is free	✗ nei	diskuter
Parts that pass our inspection fail the customer's	→	Tool wear is judged by ear	✗ nei	diskuter
Parts that pass our inspection fail the customer's	→	Setup sheets are in the setter's head, not on paper	✗ nei	diskuter
The customer's returns log and ours do not match	→	Setup sheets are in the setter's head, not on paper	✗ nei	diskuter
Setup sheets are in the setter's head, not on paper	→	Deburring is done by whoever is free	✗ nei	diskuter
Parts that pass our inspection fail the customer's	→	Maintenance is done when a machine stops	✗ nei	diskuter
First-off inspection is skipped when the job is late	→	Parts that pass our inspection fail the customer's	✗ nei	diskuter
The customer's returns log and ours do not match	→	…	✗ nei	diskuter
Tool wear is judged by ear	→	Setup sheets are in the setter's head, not on paper	✗ nei	diskuter
Maintenance is done when a machine stops	→	First-off inspection is skipped when the job is late	✗ nei	diskuter
…	→	Setup sheets are in the setter's head, not on paper	✗ nei	diskuter
Setup sheets are in the setter's head, not on paper	→	Parts that pass our inspection fail the customer's	✗ nei	diskuter
Deburring is done by whoever is free	→	…	✗ nei	diskuter
…	→	Maintenance is done when a machine stops	✗ nei	diskuter
Maintenance is done when a machine stops	→	Tool wear is judged by ear	✗ nei	diskuter
New jobs are quoted from the last similar job, not from the drawing	→	Deburring is done by whoever is free	✗ nei	diskuter
Tool wear is judged by ear	→	The customer's returns log and ours do not match	✗ nei	diskuter
Deburring is done by whoever is free	→	Maintenance is done when a machine stops	✗ nei	diskuter
New jobs are quoted from the last similar job, not from the drawing	→	Parts that pass our inspection fail the customer's	✗ nei	diskuter
Parts that pass our inspection fail the customer's	→	New jobs are quoted from the last similar job, not from the drawing	✗ nei	diskuter
The customer's returns log and ours do not match	→	New jobs are quoted from the last similar job, not from the drawing	✗ nei	diskuter
…	→	Setup sheets are in the setter's head, not on paper	✗ nei	diskuter
First-off inspection is skipped when the job is late	→	New jobs are quoted from the last similar job, not from the drawing	✗ nei	diskuter
…	→	Maintenance is done when a machine stops	✗ nei	diskuter
Parts that pass our inspection fail the customer's	→	…	✗ nei	diskuter
First-off inspection is skipped when the job is late	→	Setup sheets are in the setter's head, not on paper	✗ nei	diskuter
…	→	…	✗ nei	diskuter
New jobs are quoted from the last similar job, not from the drawing	→	Setup sheets are in the setter's head, not on paper	✗ nei	diskuter
New jobs are quoted from the last similar job, not from the drawing	→	Tool wear is judged by ear	✗ nei	diskuter
Maintenance is done when a machine stops	→	Parts that pass our inspection fail the customer's	✗ nei	diskuter
First-off inspection is skipped when the job is late	→	The customer's returns log and ours do not match	✗ nei	diskuter
Maintenance is done when a machine stops	→	New jobs are quoted from the last similar job, not from the drawing	✗ nei	diskuter
Maintenance is done when a machine stops	→	…	✗ nei	diskuter
First-off inspection is skipped when the job is late	→	Tool wear is judged by ear	✗ nei	diskuter
New jobs are quoted from the last similar job, not from the drawing	→	…	✗ nei	diskuter
…	→	Tool wear is judged by ear	✗ nei	diskuter
Deburring is done by whoever is free	→	New jobs are quoted from the last similar job, not from the drawing	✗ nei	diskuter
Parts that pass our inspection fail the customer's	→	First-off inspection is skipped when the job is late	✗ nei	diskuter
…	→	First-off inspection is skipped when the job is late	✗ nei	diskuter
…	→	First-off inspection is skipped when the job is late	✗ nei	diskuter
…	→	Parts that pass our inspection fail the customer's	✗ nei	diskuter
Setup sheets are in the setter's head, not on paper	→	First-off inspection is skipped when the job is late	✗ nei	diskuter
First-off inspection is skipped when the job is late	→	…	✗ nei	diskuter
Tool wear is judged by ear	→	…	✗ nei	diskuter
New jobs are quoted from the last similar job, not from the drawing	→	The customer's returns log and ours do not match	✗ nei	diskuter
Tool wear is judged by ear	→	First-off inspection is skipped when the job is late	✗ nei	diskuter
…	→	The customer's returns log and ours do not match	✗ nei	diskuter
…	→	Deburring is done by whoever is free	✗ nei	diskuter
Setup sheets are in the setter's head, not on paper	→	…	✗ nei	diskuter
…	→	New jobs are quoted from the last similar job, not from the drawing	✗ nei	diskuter
Setup sheets are in the setter's head, not on paper	→	The customer's returns log and ours do not match	✗ nei	diskuter
New jobs are quoted from the last similar job, not from the drawing	→	Maintenance is done when a machine stops	✗ nei	diskuter
Maintenance is done when a machine stops	→	…	✗ nei	diskuter
Parts that pass our inspection fail the customer's	→	…	✗ nei	diskuter