Struttura · Why do parts that passed inspection come back?

LA DOMANDA

Why do parts that passed inspection come back?

Una influisce in modo significativo sull’altra? Decidono i tre quarti dei voti espressi.

Stai guardando come ospite. Inserisci un nome utente per entrare e partecipare.

Le domande sono distribuite tra i gruppi, quindi ricevi quelle assegnate al tuo gruppo — non tutte e 180.

perché

Nessuno potrebbe rispondere a diverse centinaia di coppie. Ogni coppia va a un gruppo; una coppia su cui il gruppo si divide passa poi ad altri gruppi, quindi può comparire più tardi nel tuo elenco anche se è partita altrove. Il numero delle risolte include il lavoro di tutti i gruppi, ed è per questo che sale più in fretta di quanto si accorci il tuo elenco.

risolte: 176 / 180 da rispondere: 0

Ultimo conteggio: decise: 176 · passate ai panel tra gruppi: 1 · contese: 0 · sotto il quorum: 3 — i panel richiedono almeno max(2, 75% del panel) voti espressi; il tuo panel più piccolo ha 15 membri.

chiudi ✕

… → influisce su? → Parts that pass our inspection fail the customer's

Ancora nessun intervento.

Fase conclusa — lo storico delle coppie e dei voti è qui sopra.Verifica la logica ↗

Batch traceability ends at the door	→	Temperature in the shop swings fifteen degrees between morning and afternoon	aperta	discuti
…	→	Deburring is done by whoever is free	aperta passata oltre	discuti
Setup sheets are in the setter's head, not on paper	→	New jobs are quoted from the last similar job, not from the drawing	aperta	discuti
Maintenance is done when a machine stops	→	The customer's returns log and ours do not match	aperta	discuti
Rework is not counted anywhere	→	Quotes are won on price, so cycle times are cut to the bone	✓ sì	discuti
Customers changed their inspection method and never told us	→	Operators are paid on parts per hour	✓ sì	discuti
Customers changed their inspection method and never told us	→	Coolant is changed when it smells, not on a schedule	✓ sì	discuti
Quotes are won on price, so cycle times are cut to the bone	→	The oldest machine makes the tightest-tolerance part	✓ sì	discuti
Quotes are won on price, so cycle times are cut to the bone	→	Operators are paid on parts per hour	✓ sì	discuti
The same operator runs the same machine for years and nobody checks the settings	→	The drawing on the floor is not the revision the customer ordered	✓ sì	discuti
Tool wear is judged by ear	→	Deburring is done by whoever is free	✓ sì	discuti
Deburring is done by whoever is free	→	Parts that pass our inspection fail the customer's	✓ sì	discuti
Parts that pass our inspection fail the customer's	→	The customer's returns log and ours do not match	✓ sì	discuti
Deburring is done by whoever is free	→	The customer's returns log and ours do not match	✓ per deduzione	discuti
Quotes are won on price, so cycle times are cut to the bone	→	Coolant is changed when it smells, not on a schedule	✗ no	discuti
Temperature in the shop swings fifteen degrees between morning and afternoon	→	Quotes are won on price, so cycle times are cut to the bone	✗ no	discuti
Coolant is changed when it smells, not on a schedule	→	Quotes are won on price, so cycle times are cut to the bone	✗ no	discuti
The same operator runs the same machine for years and nobody checks the settings	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ no	discuti
Rework is not counted anywhere	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ no	discuti
Rework is not counted anywhere	→	Customers changed their inspection method and never told us	✗ no	discuti
The drawing on the floor is not the revision the customer ordered	→	The same operator runs the same machine for years and nobody checks the settings	✗ no	discuti
The drawing on the floor is not the revision the customer ordered	→	The oldest machine makes the tightest-tolerance part	✗ no	discuti
The drawing on the floor is not the revision the customer ordered	→	Coolant is changed when it smells, not on a schedule	✗ no	discuti
The drawing on the floor is not the revision the customer ordered	→	Batch traceability ends at the door	✗ no	discuti
Customers changed their inspection method and never told us	→	The oldest machine makes the tightest-tolerance part	✗ no	discuti
Coolant is changed when it smells, not on a schedule	→	Customers changed their inspection method and never told us	✗ no	discuti
The same operator runs the same machine for years and nobody checks the settings	→	Quotes are won on price, so cycle times are cut to the bone	✗ no	discuti
Rework is not counted anywhere	→	The oldest machine makes the tightest-tolerance part	✗ no	discuti
Temperature in the shop swings fifteen degrees between morning and afternoon	→	Operators are paid on parts per hour	✗ no	discuti
The same operator runs the same machine for years and nobody checks the settings	→	Operators are paid on parts per hour	✗ no	discuti
Batch traceability ends at the door	→	Quotes are won on price, so cycle times are cut to the bone	✗ no	discuti
The drawing on the floor is not the revision the customer ordered	→	Customers changed their inspection method and never told us	✗ no	discuti
Quotes are won on price, so cycle times are cut to the bone	→	Customers changed their inspection method and never told us	✗ no	discuti
Temperature in the shop swings fifteen degrees between morning and afternoon	→	The oldest machine makes the tightest-tolerance part	✗ no	discuti
Rework is not counted anywhere	→	Batch traceability ends at the door	✗ no	discuti
The oldest machine makes the tightest-tolerance part	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ no	discuti
Coolant is changed when it smells, not on a schedule	→	The oldest machine makes the tightest-tolerance part	✗ no	discuti
Operators are paid on parts per hour	→	The drawing on the floor is not the revision the customer ordered	✗ no	discuti
The drawing on the floor is not the revision the customer ordered	→	Quotes are won on price, so cycle times are cut to the bone	✗ no	discuti
Customers changed their inspection method and never told us	→	The drawing on the floor is not the revision the customer ordered	✗ no	discuti
Quotes are won on price, so cycle times are cut to the bone	→	Rework is not counted anywhere	✗ no	discuti
Customers changed their inspection method and never told us	→	Rework is not counted anywhere	✗ no	discuti
Quotes are won on price, so cycle times are cut to the bone	→	Batch traceability ends at the door	✗ no	discuti
The drawing on the floor is not the revision the customer ordered	→	Rework is not counted anywhere	✗ no	discuti
Operators are paid on parts per hour	→	Rework is not counted anywhere	✗ no	discuti
The oldest machine makes the tightest-tolerance part	→	Coolant is changed when it smells, not on a schedule	✗ no	discuti
Coolant is changed when it smells, not on a schedule	→	Batch traceability ends at the door	✗ no	discuti
Customers changed their inspection method and never told us	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ no	discuti
Customers changed their inspection method and never told us	→	Batch traceability ends at the door	✗ no	discuti
Temperature in the shop swings fifteen degrees between morning and afternoon	→	Batch traceability ends at the door	✗ no	discuti
Temperature in the shop swings fifteen degrees between morning and afternoon	→	Coolant is changed when it smells, not on a schedule	✗ no	discuti
Batch traceability ends at the door	→	The oldest machine makes the tightest-tolerance part	✗ no	discuti
Coolant is changed when it smells, not on a schedule	→	Rework is not counted anywhere	✗ no	discuti
The oldest machine makes the tightest-tolerance part	→	The same operator runs the same machine for years and nobody checks the settings	✗ no	discuti
Operators are paid on parts per hour	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ no	discuti
The same operator runs the same machine for years and nobody checks the settings	→	Customers changed their inspection method and never told us	✗ no	discuti
Batch traceability ends at the door	→	Coolant is changed when it smells, not on a schedule	✗ no	discuti
Operators are paid on parts per hour	→	Customers changed their inspection method and never told us	✗ no	discuti
Batch traceability ends at the door	→	Customers changed their inspection method and never told us	✗ no	discuti
Rework is not counted anywhere	→	The drawing on the floor is not the revision the customer ordered	✗ no	discuti
Operators are paid on parts per hour	→	The oldest machine makes the tightest-tolerance part	✗ no	discuti
Operators are paid on parts per hour	→	The same operator runs the same machine for years and nobody checks the settings	✗ no	discuti
The oldest machine makes the tightest-tolerance part	→	Rework is not counted anywhere	✗ no	discuti
Temperature in the shop swings fifteen degrees between morning and afternoon	→	The same operator runs the same machine for years and nobody checks the settings	✗ no	discuti
Batch traceability ends at the door	→	Operators are paid on parts per hour	✗ no	discuti
Temperature in the shop swings fifteen degrees between morning and afternoon	→	Customers changed their inspection method and never told us	✗ no	discuti
Coolant is changed when it smells, not on a schedule	→	The drawing on the floor is not the revision the customer ordered	✗ no	discuti
Operators are paid on parts per hour	→	Batch traceability ends at the door	✗ no	discuti
The oldest machine makes the tightest-tolerance part	→	Operators are paid on parts per hour	✗ no	discuti
Quotes are won on price, so cycle times are cut to the bone	→	The drawing on the floor is not the revision the customer ordered	✗ no	discuti
The oldest machine makes the tightest-tolerance part	→	The drawing on the floor is not the revision the customer ordered	✗ no	discuti
Temperature in the shop swings fifteen degrees between morning and afternoon	→	Rework is not counted anywhere	✗ no	discuti
Operators are paid on parts per hour	→	Quotes are won on price, so cycle times are cut to the bone	✗ no	discuti
The oldest machine makes the tightest-tolerance part	→	Quotes are won on price, so cycle times are cut to the bone	✗ no	discuti
The oldest machine makes the tightest-tolerance part	→	Batch traceability ends at the door	✗ no	discuti
Rework is not counted anywhere	→	Operators are paid on parts per hour	✗ no	discuti
Coolant is changed when it smells, not on a schedule	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ no	discuti
The same operator runs the same machine for years and nobody checks the settings	→	Batch traceability ends at the door	✗ no	discuti
Coolant is changed when it smells, not on a schedule	→	The same operator runs the same machine for years and nobody checks the settings	✗ no	discuti
Quotes are won on price, so cycle times are cut to the bone	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ no	discuti
The same operator runs the same machine for years and nobody checks the settings	→	Rework is not counted anywhere	✗ no	discuti
Customers changed their inspection method and never told us	→	The same operator runs the same machine for years and nobody checks the settings	✗ no	discuti
Rework is not counted anywhere	→	Coolant is changed when it smells, not on a schedule	✗ no	discuti
Rework is not counted anywhere	→	The same operator runs the same machine for years and nobody checks the settings	✗ no	discuti
The drawing on the floor is not the revision the customer ordered	→	Operators are paid on parts per hour	✗ no	discuti
The same operator runs the same machine for years and nobody checks the settings	→	The oldest machine makes the tightest-tolerance part	✗ no	discuti
Operators are paid on parts per hour	→	Coolant is changed when it smells, not on a schedule	✗ no	discuti
The same operator runs the same machine for years and nobody checks the settings	→	Coolant is changed when it smells, not on a schedule	✗ no	discuti
The oldest machine makes the tightest-tolerance part	→	Customers changed their inspection method and never told us	✗ no	discuti
Batch traceability ends at the door	→	The same operator runs the same machine for years and nobody checks the settings	✗ no	discuti
The drawing on the floor is not the revision the customer ordered	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ no	discuti
Coolant is changed when it smells, not on a schedule	→	Operators are paid on parts per hour	✗ no	discuti
Customers changed their inspection method and never told us	→	Quotes are won on price, so cycle times are cut to the bone	✗ no	discuti
Temperature in the shop swings fifteen degrees between morning and afternoon	→	The drawing on the floor is not the revision the customer ordered	✗ no	discuti
Batch traceability ends at the door	→	Rework is not counted anywhere	✗ no	discuti
Batch traceability ends at the door	→	The drawing on the floor is not the revision the customer ordered	✗ no	discuti
Quotes are won on price, so cycle times are cut to the bone	→	The same operator runs the same machine for years and nobody checks the settings	✗ no	discuti
Deburring is done by whoever is free	→	Setup sheets are in the setter's head, not on paper	✗ no	discuti
Deburring is done by whoever is free	→	First-off inspection is skipped when the job is late	✗ no	discuti
New jobs are quoted from the last similar job, not from the drawing	→	First-off inspection is skipped when the job is late	✗ no	discuti
Deburring is done by whoever is free	→	…	✗ no	discuti
First-off inspection is skipped when the job is late	→	…	✗ no	discuti
The customer's returns log and ours do not match	→	…	✗ no	discuti
Setup sheets are in the setter's head, not on paper	→	Maintenance is done when a machine stops	✗ no	discuti
…	→	…	✗ no	discuti
Maintenance is done when a machine stops	→	Deburring is done by whoever is free	✗ no	discuti
The customer's returns log and ours do not match	→	Maintenance is done when a machine stops	✗ no	discuti
Setup sheets are in the setter's head, not on paper	→	…	✗ no	discuti
Deburring is done by whoever is free	→	Tool wear is judged by ear	✗ no	discuti
…	→	Parts that pass our inspection fail the customer's	✗ no	in primo piano ↑ · chiudi ✕
Tool wear is judged by ear	→	New jobs are quoted from the last similar job, not from the drawing	✗ no	discuti
New jobs are quoted from the last similar job, not from the drawing	→	…	✗ no	discuti
The customer's returns log and ours do not match	→	First-off inspection is skipped when the job is late	✗ no	discuti
…	→	New jobs are quoted from the last similar job, not from the drawing	✗ no	discuti
Setup sheets are in the setter's head, not on paper	→	Tool wear is judged by ear	✗ no	discuti
The customer's returns log and ours do not match	→	Parts that pass our inspection fail the customer's	✗ no	discuti
Parts that pass our inspection fail the customer's	→	Deburring is done by whoever is free	✗ no	discuti
Tool wear is judged by ear	→	Maintenance is done when a machine stops	✗ no	discuti
…	→	Tool wear is judged by ear	✗ no	discuti
First-off inspection is skipped when the job is late	→	Deburring is done by whoever is free	✗ no	discuti
…	→	The customer's returns log and ours do not match	✗ no	discuti
Tool wear is judged by ear	→	Parts that pass our inspection fail the customer's	✗ no	discuti
The customer's returns log and ours do not match	→	Tool wear is judged by ear	✗ no	discuti
Tool wear is judged by ear	→	…	✗ no	discuti
Maintenance is done when a machine stops	→	Setup sheets are in the setter's head, not on paper	✗ no	discuti
First-off inspection is skipped when the job is late	→	Maintenance is done when a machine stops	✗ no	discuti
The customer's returns log and ours do not match	→	Deburring is done by whoever is free	✗ no	discuti
Parts that pass our inspection fail the customer's	→	Tool wear is judged by ear	✗ no	discuti
Parts that pass our inspection fail the customer's	→	Setup sheets are in the setter's head, not on paper	✗ no	discuti
The customer's returns log and ours do not match	→	Setup sheets are in the setter's head, not on paper	✗ no	discuti
Setup sheets are in the setter's head, not on paper	→	Deburring is done by whoever is free	✗ no	discuti
Parts that pass our inspection fail the customer's	→	Maintenance is done when a machine stops	✗ no	discuti
First-off inspection is skipped when the job is late	→	Parts that pass our inspection fail the customer's	✗ no	discuti
The customer's returns log and ours do not match	→	…	✗ no	discuti
Tool wear is judged by ear	→	Setup sheets are in the setter's head, not on paper	✗ no	discuti
Maintenance is done when a machine stops	→	First-off inspection is skipped when the job is late	✗ no	discuti
…	→	Setup sheets are in the setter's head, not on paper	✗ no	discuti
Setup sheets are in the setter's head, not on paper	→	Parts that pass our inspection fail the customer's	✗ no	discuti
Deburring is done by whoever is free	→	…	✗ no	discuti
…	→	Maintenance is done when a machine stops	✗ no	discuti
Maintenance is done when a machine stops	→	Tool wear is judged by ear	✗ no	discuti
New jobs are quoted from the last similar job, not from the drawing	→	Deburring is done by whoever is free	✗ no	discuti
Tool wear is judged by ear	→	The customer's returns log and ours do not match	✗ no	discuti
Deburring is done by whoever is free	→	Maintenance is done when a machine stops	✗ no	discuti
New jobs are quoted from the last similar job, not from the drawing	→	Parts that pass our inspection fail the customer's	✗ no	discuti
Parts that pass our inspection fail the customer's	→	New jobs are quoted from the last similar job, not from the drawing	✗ no	discuti
The customer's returns log and ours do not match	→	New jobs are quoted from the last similar job, not from the drawing	✗ no	discuti
…	→	Setup sheets are in the setter's head, not on paper	✗ no	discuti
First-off inspection is skipped when the job is late	→	New jobs are quoted from the last similar job, not from the drawing	✗ no	discuti
…	→	Maintenance is done when a machine stops	✗ no	discuti
Parts that pass our inspection fail the customer's	→	…	✗ no	discuti
First-off inspection is skipped when the job is late	→	Setup sheets are in the setter's head, not on paper	✗ no	discuti
…	→	…	✗ no	discuti
New jobs are quoted from the last similar job, not from the drawing	→	Setup sheets are in the setter's head, not on paper	✗ no	discuti
New jobs are quoted from the last similar job, not from the drawing	→	Tool wear is judged by ear	✗ no	discuti
Maintenance is done when a machine stops	→	Parts that pass our inspection fail the customer's	✗ no	discuti
First-off inspection is skipped when the job is late	→	The customer's returns log and ours do not match	✗ no	discuti
Maintenance is done when a machine stops	→	New jobs are quoted from the last similar job, not from the drawing	✗ no	discuti
Maintenance is done when a machine stops	→	…	✗ no	discuti
First-off inspection is skipped when the job is late	→	Tool wear is judged by ear	✗ no	discuti
New jobs are quoted from the last similar job, not from the drawing	→	…	✗ no	discuti
…	→	Tool wear is judged by ear	✗ no	discuti
Deburring is done by whoever is free	→	New jobs are quoted from the last similar job, not from the drawing	✗ no	discuti
Parts that pass our inspection fail the customer's	→	First-off inspection is skipped when the job is late	✗ no	discuti
…	→	First-off inspection is skipped when the job is late	✗ no	discuti
…	→	First-off inspection is skipped when the job is late	✗ no	discuti
…	→	Parts that pass our inspection fail the customer's	✗ no	discuti
Setup sheets are in the setter's head, not on paper	→	First-off inspection is skipped when the job is late	✗ no	discuti
First-off inspection is skipped when the job is late	→	…	✗ no	discuti
Tool wear is judged by ear	→	…	✗ no	discuti
New jobs are quoted from the last similar job, not from the drawing	→	The customer's returns log and ours do not match	✗ no	discuti
Tool wear is judged by ear	→	First-off inspection is skipped when the job is late	✗ no	discuti
…	→	The customer's returns log and ours do not match	✗ no	discuti
…	→	Deburring is done by whoever is free	✗ no	discuti
Setup sheets are in the setter's head, not on paper	→	…	✗ no	discuti
…	→	New jobs are quoted from the last similar job, not from the drawing	✗ no	discuti
Setup sheets are in the setter's head, not on paper	→	The customer's returns log and ours do not match	✗ no	discuti
New jobs are quoted from the last similar job, not from the drawing	→	Maintenance is done when a machine stops	✗ no	discuti
Maintenance is done when a machine stops	→	…	✗ no	discuti
Parts that pass our inspection fail the customer's	→	…	✗ no	discuti