Structuration · Why do parts that passed inspection come back?

LA QUESTION

Why do parts that passed inspection come back?

L’une influence-t-elle fortement l’autre ? Les trois quarts des votes exprimés décident.

Mode invité. Choisissez un pseudo pour rejoindre la salle et participer.

Les questions sont réparties entre les groupes : vous recevez celles attribuées à votre groupe — pas toutes les 180.

pourquoi

Personne ne pourrait répondre à plusieurs centaines de paires. Chaque paire va à un groupe ; une paire sur laquelle le groupe se divise est ensuite renvoyée à d’autres groupes, et peut donc apparaître plus tard dans votre liste même si elle a commencé ailleurs. Le nombre de paires tranchées inclut le travail de tous les groupes : c’est pourquoi il monte plus vite que votre propre liste ne diminue.

tranchées : 176 / 180 à vous de répondre : 0

Dernier décompte : tranchées : 176 · transmises à des panels inter-groupes : 1 · contestées : 0 · sous le quorum : 3 — les panels ont besoin d’au moins max(2, 75 % du panel) votes exprimés ; votre plus petit panel compte 15 membres.

fermer ✕

… → influence ? → New jobs are quoted from the last similar job, not from the drawing

Rien n’a encore été dit.

Phase terminée — l’archive des paires et des votes figure ci-dessus.Vérifier la logique ↗

Batch traceability ends at the door	→	Temperature in the shop swings fifteen degrees between morning and afternoon	ouvert	discuter
…	→	Deburring is done by whoever is free	ouvert transmis	discuter
Setup sheets are in the setter's head, not on paper	→	New jobs are quoted from the last similar job, not from the drawing	ouvert	discuter
Maintenance is done when a machine stops	→	The customer's returns log and ours do not match	ouvert	discuter
Rework is not counted anywhere	→	Quotes are won on price, so cycle times are cut to the bone	✓ oui	discuter
Customers changed their inspection method and never told us	→	Operators are paid on parts per hour	✓ oui	discuter
Customers changed their inspection method and never told us	→	Coolant is changed when it smells, not on a schedule	✓ oui	discuter
Quotes are won on price, so cycle times are cut to the bone	→	The oldest machine makes the tightest-tolerance part	✓ oui	discuter
Quotes are won on price, so cycle times are cut to the bone	→	Operators are paid on parts per hour	✓ oui	discuter
The same operator runs the same machine for years and nobody checks the settings	→	The drawing on the floor is not the revision the customer ordered	✓ oui	discuter
Tool wear is judged by ear	→	Deburring is done by whoever is free	✓ oui	discuter
Deburring is done by whoever is free	→	Parts that pass our inspection fail the customer's	✓ oui	discuter
Parts that pass our inspection fail the customer's	→	The customer's returns log and ours do not match	✓ oui	discuter
Deburring is done by whoever is free	→	The customer's returns log and ours do not match	✓ déduit	discuter
Quotes are won on price, so cycle times are cut to the bone	→	Coolant is changed when it smells, not on a schedule	✗ non	discuter
Temperature in the shop swings fifteen degrees between morning and afternoon	→	Quotes are won on price, so cycle times are cut to the bone	✗ non	discuter
Coolant is changed when it smells, not on a schedule	→	Quotes are won on price, so cycle times are cut to the bone	✗ non	discuter
The same operator runs the same machine for years and nobody checks the settings	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ non	discuter
Rework is not counted anywhere	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ non	discuter
Rework is not counted anywhere	→	Customers changed their inspection method and never told us	✗ non	discuter
The drawing on the floor is not the revision the customer ordered	→	The same operator runs the same machine for years and nobody checks the settings	✗ non	discuter
The drawing on the floor is not the revision the customer ordered	→	The oldest machine makes the tightest-tolerance part	✗ non	discuter
The drawing on the floor is not the revision the customer ordered	→	Coolant is changed when it smells, not on a schedule	✗ non	discuter
The drawing on the floor is not the revision the customer ordered	→	Batch traceability ends at the door	✗ non	discuter
Customers changed their inspection method and never told us	→	The oldest machine makes the tightest-tolerance part	✗ non	discuter
Coolant is changed when it smells, not on a schedule	→	Customers changed their inspection method and never told us	✗ non	discuter
The same operator runs the same machine for years and nobody checks the settings	→	Quotes are won on price, so cycle times are cut to the bone	✗ non	discuter
Rework is not counted anywhere	→	The oldest machine makes the tightest-tolerance part	✗ non	discuter
Temperature in the shop swings fifteen degrees between morning and afternoon	→	Operators are paid on parts per hour	✗ non	discuter
The same operator runs the same machine for years and nobody checks the settings	→	Operators are paid on parts per hour	✗ non	discuter
Batch traceability ends at the door	→	Quotes are won on price, so cycle times are cut to the bone	✗ non	discuter
The drawing on the floor is not the revision the customer ordered	→	Customers changed their inspection method and never told us	✗ non	discuter
Quotes are won on price, so cycle times are cut to the bone	→	Customers changed their inspection method and never told us	✗ non	discuter
Temperature in the shop swings fifteen degrees between morning and afternoon	→	The oldest machine makes the tightest-tolerance part	✗ non	discuter
Rework is not counted anywhere	→	Batch traceability ends at the door	✗ non	discuter
The oldest machine makes the tightest-tolerance part	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ non	discuter
Coolant is changed when it smells, not on a schedule	→	The oldest machine makes the tightest-tolerance part	✗ non	discuter
Operators are paid on parts per hour	→	The drawing on the floor is not the revision the customer ordered	✗ non	discuter
The drawing on the floor is not the revision the customer ordered	→	Quotes are won on price, so cycle times are cut to the bone	✗ non	discuter
Customers changed their inspection method and never told us	→	The drawing on the floor is not the revision the customer ordered	✗ non	discuter
Quotes are won on price, so cycle times are cut to the bone	→	Rework is not counted anywhere	✗ non	discuter
Customers changed their inspection method and never told us	→	Rework is not counted anywhere	✗ non	discuter
Quotes are won on price, so cycle times are cut to the bone	→	Batch traceability ends at the door	✗ non	discuter
The drawing on the floor is not the revision the customer ordered	→	Rework is not counted anywhere	✗ non	discuter
Operators are paid on parts per hour	→	Rework is not counted anywhere	✗ non	discuter
The oldest machine makes the tightest-tolerance part	→	Coolant is changed when it smells, not on a schedule	✗ non	discuter
Coolant is changed when it smells, not on a schedule	→	Batch traceability ends at the door	✗ non	discuter
Customers changed their inspection method and never told us	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ non	discuter
Customers changed their inspection method and never told us	→	Batch traceability ends at the door	✗ non	discuter
Temperature in the shop swings fifteen degrees between morning and afternoon	→	Batch traceability ends at the door	✗ non	discuter
Temperature in the shop swings fifteen degrees between morning and afternoon	→	Coolant is changed when it smells, not on a schedule	✗ non	discuter
Batch traceability ends at the door	→	The oldest machine makes the tightest-tolerance part	✗ non	discuter
Coolant is changed when it smells, not on a schedule	→	Rework is not counted anywhere	✗ non	discuter
The oldest machine makes the tightest-tolerance part	→	The same operator runs the same machine for years and nobody checks the settings	✗ non	discuter
Operators are paid on parts per hour	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ non	discuter
The same operator runs the same machine for years and nobody checks the settings	→	Customers changed their inspection method and never told us	✗ non	discuter
Batch traceability ends at the door	→	Coolant is changed when it smells, not on a schedule	✗ non	discuter
Operators are paid on parts per hour	→	Customers changed their inspection method and never told us	✗ non	discuter
Batch traceability ends at the door	→	Customers changed their inspection method and never told us	✗ non	discuter
Rework is not counted anywhere	→	The drawing on the floor is not the revision the customer ordered	✗ non	discuter
Operators are paid on parts per hour	→	The oldest machine makes the tightest-tolerance part	✗ non	discuter
Operators are paid on parts per hour	→	The same operator runs the same machine for years and nobody checks the settings	✗ non	discuter
The oldest machine makes the tightest-tolerance part	→	Rework is not counted anywhere	✗ non	discuter
Temperature in the shop swings fifteen degrees between morning and afternoon	→	The same operator runs the same machine for years and nobody checks the settings	✗ non	discuter
Batch traceability ends at the door	→	Operators are paid on parts per hour	✗ non	discuter
Temperature in the shop swings fifteen degrees between morning and afternoon	→	Customers changed their inspection method and never told us	✗ non	discuter
Coolant is changed when it smells, not on a schedule	→	The drawing on the floor is not the revision the customer ordered	✗ non	discuter
Operators are paid on parts per hour	→	Batch traceability ends at the door	✗ non	discuter
The oldest machine makes the tightest-tolerance part	→	Operators are paid on parts per hour	✗ non	discuter
Quotes are won on price, so cycle times are cut to the bone	→	The drawing on the floor is not the revision the customer ordered	✗ non	discuter
The oldest machine makes the tightest-tolerance part	→	The drawing on the floor is not the revision the customer ordered	✗ non	discuter
Temperature in the shop swings fifteen degrees between morning and afternoon	→	Rework is not counted anywhere	✗ non	discuter
Operators are paid on parts per hour	→	Quotes are won on price, so cycle times are cut to the bone	✗ non	discuter
The oldest machine makes the tightest-tolerance part	→	Quotes are won on price, so cycle times are cut to the bone	✗ non	discuter
The oldest machine makes the tightest-tolerance part	→	Batch traceability ends at the door	✗ non	discuter
Rework is not counted anywhere	→	Operators are paid on parts per hour	✗ non	discuter
Coolant is changed when it smells, not on a schedule	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ non	discuter
The same operator runs the same machine for years and nobody checks the settings	→	Batch traceability ends at the door	✗ non	discuter
Coolant is changed when it smells, not on a schedule	→	The same operator runs the same machine for years and nobody checks the settings	✗ non	discuter
Quotes are won on price, so cycle times are cut to the bone	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ non	discuter
The same operator runs the same machine for years and nobody checks the settings	→	Rework is not counted anywhere	✗ non	discuter
Customers changed their inspection method and never told us	→	The same operator runs the same machine for years and nobody checks the settings	✗ non	discuter
Rework is not counted anywhere	→	Coolant is changed when it smells, not on a schedule	✗ non	discuter
Rework is not counted anywhere	→	The same operator runs the same machine for years and nobody checks the settings	✗ non	discuter
The drawing on the floor is not the revision the customer ordered	→	Operators are paid on parts per hour	✗ non	discuter
The same operator runs the same machine for years and nobody checks the settings	→	The oldest machine makes the tightest-tolerance part	✗ non	discuter
Operators are paid on parts per hour	→	Coolant is changed when it smells, not on a schedule	✗ non	discuter
The same operator runs the same machine for years and nobody checks the settings	→	Coolant is changed when it smells, not on a schedule	✗ non	discuter
The oldest machine makes the tightest-tolerance part	→	Customers changed their inspection method and never told us	✗ non	discuter
Batch traceability ends at the door	→	The same operator runs the same machine for years and nobody checks the settings	✗ non	discuter
The drawing on the floor is not the revision the customer ordered	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ non	discuter
Coolant is changed when it smells, not on a schedule	→	Operators are paid on parts per hour	✗ non	discuter
Customers changed their inspection method and never told us	→	Quotes are won on price, so cycle times are cut to the bone	✗ non	discuter
Temperature in the shop swings fifteen degrees between morning and afternoon	→	The drawing on the floor is not the revision the customer ordered	✗ non	discuter
Batch traceability ends at the door	→	Rework is not counted anywhere	✗ non	discuter
Batch traceability ends at the door	→	The drawing on the floor is not the revision the customer ordered	✗ non	discuter
Quotes are won on price, so cycle times are cut to the bone	→	The same operator runs the same machine for years and nobody checks the settings	✗ non	discuter
Deburring is done by whoever is free	→	Setup sheets are in the setter's head, not on paper	✗ non	discuter
Deburring is done by whoever is free	→	First-off inspection is skipped when the job is late	✗ non	discuter
New jobs are quoted from the last similar job, not from the drawing	→	First-off inspection is skipped when the job is late	✗ non	discuter
Deburring is done by whoever is free	→	…	✗ non	discuter
First-off inspection is skipped when the job is late	→	…	✗ non	discuter
The customer's returns log and ours do not match	→	…	✗ non	discuter
Setup sheets are in the setter's head, not on paper	→	Maintenance is done when a machine stops	✗ non	discuter
…	→	…	✗ non	discuter
Maintenance is done when a machine stops	→	Deburring is done by whoever is free	✗ non	discuter
The customer's returns log and ours do not match	→	Maintenance is done when a machine stops	✗ non	discuter
Setup sheets are in the setter's head, not on paper	→	…	✗ non	discuter
Deburring is done by whoever is free	→	Tool wear is judged by ear	✗ non	discuter
…	→	Parts that pass our inspection fail the customer's	✗ non	discuter
Tool wear is judged by ear	→	New jobs are quoted from the last similar job, not from the drawing	✗ non	discuter
New jobs are quoted from the last similar job, not from the drawing	→	…	✗ non	discuter
The customer's returns log and ours do not match	→	First-off inspection is skipped when the job is late	✗ non	discuter
…	→	New jobs are quoted from the last similar job, not from the drawing	✗ non	discuter
Setup sheets are in the setter's head, not on paper	→	Tool wear is judged by ear	✗ non	discuter
The customer's returns log and ours do not match	→	Parts that pass our inspection fail the customer's	✗ non	discuter
Parts that pass our inspection fail the customer's	→	Deburring is done by whoever is free	✗ non	discuter
Tool wear is judged by ear	→	Maintenance is done when a machine stops	✗ non	discuter
…	→	Tool wear is judged by ear	✗ non	discuter
First-off inspection is skipped when the job is late	→	Deburring is done by whoever is free	✗ non	discuter
…	→	The customer's returns log and ours do not match	✗ non	discuter
Tool wear is judged by ear	→	Parts that pass our inspection fail the customer's	✗ non	discuter
The customer's returns log and ours do not match	→	Tool wear is judged by ear	✗ non	discuter
Tool wear is judged by ear	→	…	✗ non	discuter
Maintenance is done when a machine stops	→	Setup sheets are in the setter's head, not on paper	✗ non	discuter
First-off inspection is skipped when the job is late	→	Maintenance is done when a machine stops	✗ non	discuter
The customer's returns log and ours do not match	→	Deburring is done by whoever is free	✗ non	discuter
Parts that pass our inspection fail the customer's	→	Tool wear is judged by ear	✗ non	discuter
Parts that pass our inspection fail the customer's	→	Setup sheets are in the setter's head, not on paper	✗ non	discuter
The customer's returns log and ours do not match	→	Setup sheets are in the setter's head, not on paper	✗ non	discuter
Setup sheets are in the setter's head, not on paper	→	Deburring is done by whoever is free	✗ non	discuter
Parts that pass our inspection fail the customer's	→	Maintenance is done when a machine stops	✗ non	discuter
First-off inspection is skipped when the job is late	→	Parts that pass our inspection fail the customer's	✗ non	discuter
The customer's returns log and ours do not match	→	…	✗ non	discuter
Tool wear is judged by ear	→	Setup sheets are in the setter's head, not on paper	✗ non	discuter
Maintenance is done when a machine stops	→	First-off inspection is skipped when the job is late	✗ non	discuter
…	→	Setup sheets are in the setter's head, not on paper	✗ non	discuter
Setup sheets are in the setter's head, not on paper	→	Parts that pass our inspection fail the customer's	✗ non	discuter
Deburring is done by whoever is free	→	…	✗ non	discuter
…	→	Maintenance is done when a machine stops	✗ non	discuter
Maintenance is done when a machine stops	→	Tool wear is judged by ear	✗ non	discuter
New jobs are quoted from the last similar job, not from the drawing	→	Deburring is done by whoever is free	✗ non	discuter
Tool wear is judged by ear	→	The customer's returns log and ours do not match	✗ non	discuter
Deburring is done by whoever is free	→	Maintenance is done when a machine stops	✗ non	discuter
New jobs are quoted from the last similar job, not from the drawing	→	Parts that pass our inspection fail the customer's	✗ non	discuter
Parts that pass our inspection fail the customer's	→	New jobs are quoted from the last similar job, not from the drawing	✗ non	discuter
The customer's returns log and ours do not match	→	New jobs are quoted from the last similar job, not from the drawing	✗ non	discuter
…	→	Setup sheets are in the setter's head, not on paper	✗ non	discuter
First-off inspection is skipped when the job is late	→	New jobs are quoted from the last similar job, not from the drawing	✗ non	discuter
…	→	Maintenance is done when a machine stops	✗ non	discuter
Parts that pass our inspection fail the customer's	→	…	✗ non	discuter
First-off inspection is skipped when the job is late	→	Setup sheets are in the setter's head, not on paper	✗ non	discuter
…	→	…	✗ non	discuter
New jobs are quoted from the last similar job, not from the drawing	→	Setup sheets are in the setter's head, not on paper	✗ non	discuter
New jobs are quoted from the last similar job, not from the drawing	→	Tool wear is judged by ear	✗ non	discuter
Maintenance is done when a machine stops	→	Parts that pass our inspection fail the customer's	✗ non	discuter
First-off inspection is skipped when the job is late	→	The customer's returns log and ours do not match	✗ non	discuter
Maintenance is done when a machine stops	→	New jobs are quoted from the last similar job, not from the drawing	✗ non	discuter
Maintenance is done when a machine stops	→	…	✗ non	discuter
First-off inspection is skipped when the job is late	→	Tool wear is judged by ear	✗ non	discuter
New jobs are quoted from the last similar job, not from the drawing	→	…	✗ non	discuter
…	→	Tool wear is judged by ear	✗ non	discuter
Deburring is done by whoever is free	→	New jobs are quoted from the last similar job, not from the drawing	✗ non	discuter
Parts that pass our inspection fail the customer's	→	First-off inspection is skipped when the job is late	✗ non	discuter
…	→	First-off inspection is skipped when the job is late	✗ non	discuter
…	→	First-off inspection is skipped when the job is late	✗ non	discuter
…	→	Parts that pass our inspection fail the customer's	✗ non	discuter
Setup sheets are in the setter's head, not on paper	→	First-off inspection is skipped when the job is late	✗ non	discuter
First-off inspection is skipped when the job is late	→	…	✗ non	discuter
Tool wear is judged by ear	→	…	✗ non	discuter
New jobs are quoted from the last similar job, not from the drawing	→	The customer's returns log and ours do not match	✗ non	discuter
Tool wear is judged by ear	→	First-off inspection is skipped when the job is late	✗ non	discuter
…	→	The customer's returns log and ours do not match	✗ non	discuter
…	→	Deburring is done by whoever is free	✗ non	discuter
Setup sheets are in the setter's head, not on paper	→	…	✗ non	discuter
…	→	New jobs are quoted from the last similar job, not from the drawing	✗ non	au premier plan ↑ · fermer ✕
Setup sheets are in the setter's head, not on paper	→	The customer's returns log and ours do not match	✗ non	discuter
New jobs are quoted from the last similar job, not from the drawing	→	Maintenance is done when a machine stops	✗ non	discuter
Maintenance is done when a machine stops	→	…	✗ non	discuter
Parts that pass our inspection fail the customer's	→	…	✗ non	discuter