Structureren · Why do parts that passed inspection come back?

DE VRAAG

Why do parts that passed inspection come back?

Heeft het ene aanzienlijke invloed op het andere? Driekwart van de uitgebrachte stemmen beslist.

Je kijkt mee als gast. Kies een gebruikersnaam om mee te doen.

Vragen worden over de groepen verdeeld, dus je krijgt de vragen die jouw groep kreeg — niet alle 180.

waarom

Niemand kan honderden paren beantwoorden. Elk paar gaat naar één groep; een paar waarover die groep verdeeld is, wordt doorverwezen naar andere groepen, dus het kan later in je lijst verschijnen ook al begon het elders. Het aantal beslist omvat het werk van alle groepen; daarom stijgt het sneller dan je eigen lijst krimpt.

beslist: 176 / 180 voor jou om te beantwoorden: 0

Laatste telling: beslist 176 · opgeschaald naar panels over groepen heen 1 · betwist 0 · onder het quorum 3 — panels hebben minstens max(2, 75% van het panel) uitgebrachte stemmen nodig; je kleinste panel heeft 15 leden.

sluiten ✕

Operators are paid on parts per hour → beïnvloedt? → Quotes are won on price, so cycle times are cut to the bone

Nog niets gezegd.

Afgeronde fase — het verslag van paren en stemmen staat hierboven.Controleer de logica ↗

Batch traceability ends at the door	→	Temperature in the shop swings fifteen degrees between morning and afternoon	open	bespreken
…	→	Deburring is done by whoever is free	open opgeschaald	bespreken
Setup sheets are in the setter's head, not on paper	→	New jobs are quoted from the last similar job, not from the drawing	open	bespreken
Maintenance is done when a machine stops	→	The customer's returns log and ours do not match	open	bespreken
Rework is not counted anywhere	→	Quotes are won on price, so cycle times are cut to the bone	✓ ja	bespreken
Customers changed their inspection method and never told us	→	Operators are paid on parts per hour	✓ ja	bespreken
Customers changed their inspection method and never told us	→	Coolant is changed when it smells, not on a schedule	✓ ja	bespreken
Quotes are won on price, so cycle times are cut to the bone	→	The oldest machine makes the tightest-tolerance part	✓ ja	bespreken
Quotes are won on price, so cycle times are cut to the bone	→	Operators are paid on parts per hour	✓ ja	bespreken
The same operator runs the same machine for years and nobody checks the settings	→	The drawing on the floor is not the revision the customer ordered	✓ ja	bespreken
Tool wear is judged by ear	→	Deburring is done by whoever is free	✓ ja	bespreken
Deburring is done by whoever is free	→	Parts that pass our inspection fail the customer's	✓ ja	bespreken
Parts that pass our inspection fail the customer's	→	The customer's returns log and ours do not match	✓ ja	bespreken
Deburring is done by whoever is free	→	The customer's returns log and ours do not match	✓ afgeleid	bespreken
Quotes are won on price, so cycle times are cut to the bone	→	Coolant is changed when it smells, not on a schedule	✗ nee	bespreken
Temperature in the shop swings fifteen degrees between morning and afternoon	→	Quotes are won on price, so cycle times are cut to the bone	✗ nee	bespreken
Coolant is changed when it smells, not on a schedule	→	Quotes are won on price, so cycle times are cut to the bone	✗ nee	bespreken
The same operator runs the same machine for years and nobody checks the settings	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ nee	bespreken
Rework is not counted anywhere	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ nee	bespreken
Rework is not counted anywhere	→	Customers changed their inspection method and never told us	✗ nee	bespreken
The drawing on the floor is not the revision the customer ordered	→	The same operator runs the same machine for years and nobody checks the settings	✗ nee	bespreken
The drawing on the floor is not the revision the customer ordered	→	The oldest machine makes the tightest-tolerance part	✗ nee	bespreken
The drawing on the floor is not the revision the customer ordered	→	Coolant is changed when it smells, not on a schedule	✗ nee	bespreken
The drawing on the floor is not the revision the customer ordered	→	Batch traceability ends at the door	✗ nee	bespreken
Customers changed their inspection method and never told us	→	The oldest machine makes the tightest-tolerance part	✗ nee	bespreken
Coolant is changed when it smells, not on a schedule	→	Customers changed their inspection method and never told us	✗ nee	bespreken
The same operator runs the same machine for years and nobody checks the settings	→	Quotes are won on price, so cycle times are cut to the bone	✗ nee	bespreken
Rework is not counted anywhere	→	The oldest machine makes the tightest-tolerance part	✗ nee	bespreken
Temperature in the shop swings fifteen degrees between morning and afternoon	→	Operators are paid on parts per hour	✗ nee	bespreken
The same operator runs the same machine for years and nobody checks the settings	→	Operators are paid on parts per hour	✗ nee	bespreken
Batch traceability ends at the door	→	Quotes are won on price, so cycle times are cut to the bone	✗ nee	bespreken
The drawing on the floor is not the revision the customer ordered	→	Customers changed their inspection method and never told us	✗ nee	bespreken
Quotes are won on price, so cycle times are cut to the bone	→	Customers changed their inspection method and never told us	✗ nee	bespreken
Temperature in the shop swings fifteen degrees between morning and afternoon	→	The oldest machine makes the tightest-tolerance part	✗ nee	bespreken
Rework is not counted anywhere	→	Batch traceability ends at the door	✗ nee	bespreken
The oldest machine makes the tightest-tolerance part	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ nee	bespreken
Coolant is changed when it smells, not on a schedule	→	The oldest machine makes the tightest-tolerance part	✗ nee	bespreken
Operators are paid on parts per hour	→	The drawing on the floor is not the revision the customer ordered	✗ nee	bespreken
The drawing on the floor is not the revision the customer ordered	→	Quotes are won on price, so cycle times are cut to the bone	✗ nee	bespreken
Customers changed their inspection method and never told us	→	The drawing on the floor is not the revision the customer ordered	✗ nee	bespreken
Quotes are won on price, so cycle times are cut to the bone	→	Rework is not counted anywhere	✗ nee	bespreken
Customers changed their inspection method and never told us	→	Rework is not counted anywhere	✗ nee	bespreken
Quotes are won on price, so cycle times are cut to the bone	→	Batch traceability ends at the door	✗ nee	bespreken
The drawing on the floor is not the revision the customer ordered	→	Rework is not counted anywhere	✗ nee	bespreken
Operators are paid on parts per hour	→	Rework is not counted anywhere	✗ nee	bespreken
The oldest machine makes the tightest-tolerance part	→	Coolant is changed when it smells, not on a schedule	✗ nee	bespreken
Coolant is changed when it smells, not on a schedule	→	Batch traceability ends at the door	✗ nee	bespreken
Customers changed their inspection method and never told us	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ nee	bespreken
Customers changed their inspection method and never told us	→	Batch traceability ends at the door	✗ nee	bespreken
Temperature in the shop swings fifteen degrees between morning and afternoon	→	Batch traceability ends at the door	✗ nee	bespreken
Temperature in the shop swings fifteen degrees between morning and afternoon	→	Coolant is changed when it smells, not on a schedule	✗ nee	bespreken
Batch traceability ends at the door	→	The oldest machine makes the tightest-tolerance part	✗ nee	bespreken
Coolant is changed when it smells, not on a schedule	→	Rework is not counted anywhere	✗ nee	bespreken
The oldest machine makes the tightest-tolerance part	→	The same operator runs the same machine for years and nobody checks the settings	✗ nee	bespreken
Operators are paid on parts per hour	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ nee	bespreken
The same operator runs the same machine for years and nobody checks the settings	→	Customers changed their inspection method and never told us	✗ nee	bespreken
Batch traceability ends at the door	→	Coolant is changed when it smells, not on a schedule	✗ nee	bespreken
Operators are paid on parts per hour	→	Customers changed their inspection method and never told us	✗ nee	bespreken
Batch traceability ends at the door	→	Customers changed their inspection method and never told us	✗ nee	bespreken
Rework is not counted anywhere	→	The drawing on the floor is not the revision the customer ordered	✗ nee	bespreken
Operators are paid on parts per hour	→	The oldest machine makes the tightest-tolerance part	✗ nee	bespreken
Operators are paid on parts per hour	→	The same operator runs the same machine for years and nobody checks the settings	✗ nee	bespreken
The oldest machine makes the tightest-tolerance part	→	Rework is not counted anywhere	✗ nee	bespreken
Temperature in the shop swings fifteen degrees between morning and afternoon	→	The same operator runs the same machine for years and nobody checks the settings	✗ nee	bespreken
Batch traceability ends at the door	→	Operators are paid on parts per hour	✗ nee	bespreken
Temperature in the shop swings fifteen degrees between morning and afternoon	→	Customers changed their inspection method and never told us	✗ nee	bespreken
Coolant is changed when it smells, not on a schedule	→	The drawing on the floor is not the revision the customer ordered	✗ nee	bespreken
Operators are paid on parts per hour	→	Batch traceability ends at the door	✗ nee	bespreken
The oldest machine makes the tightest-tolerance part	→	Operators are paid on parts per hour	✗ nee	bespreken
Quotes are won on price, so cycle times are cut to the bone	→	The drawing on the floor is not the revision the customer ordered	✗ nee	bespreken
The oldest machine makes the tightest-tolerance part	→	The drawing on the floor is not the revision the customer ordered	✗ nee	bespreken
Temperature in the shop swings fifteen degrees between morning and afternoon	→	Rework is not counted anywhere	✗ nee	bespreken
Operators are paid on parts per hour	→	Quotes are won on price, so cycle times are cut to the bone	✗ nee	in focus ↑ · sluiten ✕
The oldest machine makes the tightest-tolerance part	→	Quotes are won on price, so cycle times are cut to the bone	✗ nee	bespreken
The oldest machine makes the tightest-tolerance part	→	Batch traceability ends at the door	✗ nee	bespreken
Rework is not counted anywhere	→	Operators are paid on parts per hour	✗ nee	bespreken
Coolant is changed when it smells, not on a schedule	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ nee	bespreken
The same operator runs the same machine for years and nobody checks the settings	→	Batch traceability ends at the door	✗ nee	bespreken
Coolant is changed when it smells, not on a schedule	→	The same operator runs the same machine for years and nobody checks the settings	✗ nee	bespreken
Quotes are won on price, so cycle times are cut to the bone	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ nee	bespreken
The same operator runs the same machine for years and nobody checks the settings	→	Rework is not counted anywhere	✗ nee	bespreken
Customers changed their inspection method and never told us	→	The same operator runs the same machine for years and nobody checks the settings	✗ nee	bespreken
Rework is not counted anywhere	→	Coolant is changed when it smells, not on a schedule	✗ nee	bespreken
Rework is not counted anywhere	→	The same operator runs the same machine for years and nobody checks the settings	✗ nee	bespreken
The drawing on the floor is not the revision the customer ordered	→	Operators are paid on parts per hour	✗ nee	bespreken
The same operator runs the same machine for years and nobody checks the settings	→	The oldest machine makes the tightest-tolerance part	✗ nee	bespreken
Operators are paid on parts per hour	→	Coolant is changed when it smells, not on a schedule	✗ nee	bespreken
The same operator runs the same machine for years and nobody checks the settings	→	Coolant is changed when it smells, not on a schedule	✗ nee	bespreken
The oldest machine makes the tightest-tolerance part	→	Customers changed their inspection method and never told us	✗ nee	bespreken
Batch traceability ends at the door	→	The same operator runs the same machine for years and nobody checks the settings	✗ nee	bespreken
The drawing on the floor is not the revision the customer ordered	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ nee	bespreken
Coolant is changed when it smells, not on a schedule	→	Operators are paid on parts per hour	✗ nee	bespreken
Customers changed their inspection method and never told us	→	Quotes are won on price, so cycle times are cut to the bone	✗ nee	bespreken
Temperature in the shop swings fifteen degrees between morning and afternoon	→	The drawing on the floor is not the revision the customer ordered	✗ nee	bespreken
Batch traceability ends at the door	→	Rework is not counted anywhere	✗ nee	bespreken
Batch traceability ends at the door	→	The drawing on the floor is not the revision the customer ordered	✗ nee	bespreken
Quotes are won on price, so cycle times are cut to the bone	→	The same operator runs the same machine for years and nobody checks the settings	✗ nee	bespreken
Deburring is done by whoever is free	→	Setup sheets are in the setter's head, not on paper	✗ nee	bespreken
Deburring is done by whoever is free	→	First-off inspection is skipped when the job is late	✗ nee	bespreken
New jobs are quoted from the last similar job, not from the drawing	→	First-off inspection is skipped when the job is late	✗ nee	bespreken
Deburring is done by whoever is free	→	…	✗ nee	bespreken
First-off inspection is skipped when the job is late	→	…	✗ nee	bespreken
The customer's returns log and ours do not match	→	…	✗ nee	bespreken
Setup sheets are in the setter's head, not on paper	→	Maintenance is done when a machine stops	✗ nee	bespreken
…	→	…	✗ nee	bespreken
Maintenance is done when a machine stops	→	Deburring is done by whoever is free	✗ nee	bespreken
The customer's returns log and ours do not match	→	Maintenance is done when a machine stops	✗ nee	bespreken
Setup sheets are in the setter's head, not on paper	→	…	✗ nee	bespreken
Deburring is done by whoever is free	→	Tool wear is judged by ear	✗ nee	bespreken
…	→	Parts that pass our inspection fail the customer's	✗ nee	bespreken
Tool wear is judged by ear	→	New jobs are quoted from the last similar job, not from the drawing	✗ nee	bespreken
New jobs are quoted from the last similar job, not from the drawing	→	…	✗ nee	bespreken
The customer's returns log and ours do not match	→	First-off inspection is skipped when the job is late	✗ nee	bespreken
…	→	New jobs are quoted from the last similar job, not from the drawing	✗ nee	bespreken
Setup sheets are in the setter's head, not on paper	→	Tool wear is judged by ear	✗ nee	bespreken
The customer's returns log and ours do not match	→	Parts that pass our inspection fail the customer's	✗ nee	bespreken
Parts that pass our inspection fail the customer's	→	Deburring is done by whoever is free	✗ nee	bespreken
Tool wear is judged by ear	→	Maintenance is done when a machine stops	✗ nee	bespreken
…	→	Tool wear is judged by ear	✗ nee	bespreken
First-off inspection is skipped when the job is late	→	Deburring is done by whoever is free	✗ nee	bespreken
…	→	The customer's returns log and ours do not match	✗ nee	bespreken
Tool wear is judged by ear	→	Parts that pass our inspection fail the customer's	✗ nee	bespreken
The customer's returns log and ours do not match	→	Tool wear is judged by ear	✗ nee	bespreken
Tool wear is judged by ear	→	…	✗ nee	bespreken
Maintenance is done when a machine stops	→	Setup sheets are in the setter's head, not on paper	✗ nee	bespreken
First-off inspection is skipped when the job is late	→	Maintenance is done when a machine stops	✗ nee	bespreken
The customer's returns log and ours do not match	→	Deburring is done by whoever is free	✗ nee	bespreken
Parts that pass our inspection fail the customer's	→	Tool wear is judged by ear	✗ nee	bespreken
Parts that pass our inspection fail the customer's	→	Setup sheets are in the setter's head, not on paper	✗ nee	bespreken
The customer's returns log and ours do not match	→	Setup sheets are in the setter's head, not on paper	✗ nee	bespreken
Setup sheets are in the setter's head, not on paper	→	Deburring is done by whoever is free	✗ nee	bespreken
Parts that pass our inspection fail the customer's	→	Maintenance is done when a machine stops	✗ nee	bespreken
First-off inspection is skipped when the job is late	→	Parts that pass our inspection fail the customer's	✗ nee	bespreken
The customer's returns log and ours do not match	→	…	✗ nee	bespreken
Tool wear is judged by ear	→	Setup sheets are in the setter's head, not on paper	✗ nee	bespreken
Maintenance is done when a machine stops	→	First-off inspection is skipped when the job is late	✗ nee	bespreken
…	→	Setup sheets are in the setter's head, not on paper	✗ nee	bespreken
Setup sheets are in the setter's head, not on paper	→	Parts that pass our inspection fail the customer's	✗ nee	bespreken
Deburring is done by whoever is free	→	…	✗ nee	bespreken
…	→	Maintenance is done when a machine stops	✗ nee	bespreken
Maintenance is done when a machine stops	→	Tool wear is judged by ear	✗ nee	bespreken
New jobs are quoted from the last similar job, not from the drawing	→	Deburring is done by whoever is free	✗ nee	bespreken
Tool wear is judged by ear	→	The customer's returns log and ours do not match	✗ nee	bespreken
Deburring is done by whoever is free	→	Maintenance is done when a machine stops	✗ nee	bespreken
New jobs are quoted from the last similar job, not from the drawing	→	Parts that pass our inspection fail the customer's	✗ nee	bespreken
Parts that pass our inspection fail the customer's	→	New jobs are quoted from the last similar job, not from the drawing	✗ nee	bespreken
The customer's returns log and ours do not match	→	New jobs are quoted from the last similar job, not from the drawing	✗ nee	bespreken
…	→	Setup sheets are in the setter's head, not on paper	✗ nee	bespreken
First-off inspection is skipped when the job is late	→	New jobs are quoted from the last similar job, not from the drawing	✗ nee	bespreken
…	→	Maintenance is done when a machine stops	✗ nee	bespreken
Parts that pass our inspection fail the customer's	→	…	✗ nee	bespreken
First-off inspection is skipped when the job is late	→	Setup sheets are in the setter's head, not on paper	✗ nee	bespreken
…	→	…	✗ nee	bespreken
New jobs are quoted from the last similar job, not from the drawing	→	Setup sheets are in the setter's head, not on paper	✗ nee	bespreken
New jobs are quoted from the last similar job, not from the drawing	→	Tool wear is judged by ear	✗ nee	bespreken
Maintenance is done when a machine stops	→	Parts that pass our inspection fail the customer's	✗ nee	bespreken
First-off inspection is skipped when the job is late	→	The customer's returns log and ours do not match	✗ nee	bespreken
Maintenance is done when a machine stops	→	New jobs are quoted from the last similar job, not from the drawing	✗ nee	bespreken
Maintenance is done when a machine stops	→	…	✗ nee	bespreken
First-off inspection is skipped when the job is late	→	Tool wear is judged by ear	✗ nee	bespreken
New jobs are quoted from the last similar job, not from the drawing	→	…	✗ nee	bespreken
…	→	Tool wear is judged by ear	✗ nee	bespreken
Deburring is done by whoever is free	→	New jobs are quoted from the last similar job, not from the drawing	✗ nee	bespreken
Parts that pass our inspection fail the customer's	→	First-off inspection is skipped when the job is late	✗ nee	bespreken
…	→	First-off inspection is skipped when the job is late	✗ nee	bespreken
…	→	First-off inspection is skipped when the job is late	✗ nee	bespreken
…	→	Parts that pass our inspection fail the customer's	✗ nee	bespreken
Setup sheets are in the setter's head, not on paper	→	First-off inspection is skipped when the job is late	✗ nee	bespreken
First-off inspection is skipped when the job is late	→	…	✗ nee	bespreken
Tool wear is judged by ear	→	…	✗ nee	bespreken
New jobs are quoted from the last similar job, not from the drawing	→	The customer's returns log and ours do not match	✗ nee	bespreken
Tool wear is judged by ear	→	First-off inspection is skipped when the job is late	✗ nee	bespreken
…	→	The customer's returns log and ours do not match	✗ nee	bespreken
…	→	Deburring is done by whoever is free	✗ nee	bespreken
Setup sheets are in the setter's head, not on paper	→	…	✗ nee	bespreken
…	→	New jobs are quoted from the last similar job, not from the drawing	✗ nee	bespreken
Setup sheets are in the setter's head, not on paper	→	The customer's returns log and ours do not match	✗ nee	bespreken
New jobs are quoted from the last similar job, not from the drawing	→	Maintenance is done when a machine stops	✗ nee	bespreken
Maintenance is done when a machine stops	→	…	✗ nee	bespreken
Parts that pass our inspection fail the customer's	→	…	✗ nee	bespreken