True Causes
EL
Bahasa IndonesiaDanskDeutschEnglishEspañolFrançaisItalianoNederlandsNorskPolskiPortuguêsSrpski (latinica)SvenskaTiếng ViệtTürkçeΕλληνικάРусскийСрпски (ћирилица)Українська中文日本語한국어
← αρχική
7/7 · Δράσεις · προβολή: Δόμηση
άτομα: 30 · ιδέες: 27
πατήστε ένα ολοκληρωμένο στάδιο για να το εξερευνήσετε
✓
Καταγραφή
✓
Διευκρίνιση
✓
Ομαδοποίηση
✓
Επιλογή
✓
Δόμηση
✓
Χάρτης
7
Δράσεις
επίδειξη · δεν μετράει
εμπόδια · όποιος έχει τον σύνδεσμο · δημόσια καταχωρισμένη · σε ομοσπονδία
οικοδεσπότης: ο οικοδεσπότης της (σφραγισμένη)
άτομα: 30 · ιδέες: 27 · 2 ομάδες
Διαβατήριο → · Λογική → · αρχείο
↗ κοινοποίηση αυτού του χάρτη
Σε άλλον ιστότοπο, ως ζωντανός χάρτης:
Ως εικόνα: https://truecauses.org/d/9458191/map.svg
Ως δεδομένα: κάθε ζεύγος που κρίθηκε σε αυτή την αίθουσα (CSV). Κάθε ισχυρισμός έχει τη δική του διεύθυνση, /c/9458191/<card>, που αναγράφεται κάτω από τον χάρτη.
Αναφορά προέλευσης όταν δημοσιεύετε: Causal map: True Causes, https://truecauses.org/d/9458191
ΤΟ ΕΡΩΤΗΜΑ

Why do parts that passed inspection come back?

Επηρεάζει σημαντικά το ένα το άλλο; Αποφασίζουν τα τρία τέταρτα των ψήφων που δόθηκαν.

κλειστό · πίσω στο στάδιο Δράσεις
Προβολή ως επισκέπτης. Δώστε ένα όνομα χρήστη για να μπείτε και να συμμετάσχετε.
Τα ερωτήματα μοιράζονται ανάμεσα στις ομάδες, οπότε παίρνετε όσα δόθηκαν στην ομάδα σας — όχι και τα 180.
γιατί
Κανείς δεν θα μπορούσε να απαντήσει σε εκατοντάδες ζεύγη. Κάθε ζεύγος πηγαίνει σε μία ομάδα· ένα ζεύγος που διχάζει παραπέμπεται μετά σε άλλες ομάδες, οπότε μπορεί να εμφανιστεί αργότερα στη λίστα σας, παρόλο που ξεκίνησε αλλού. Ο αριθμός των κριμένων περιλαμβάνει τη δουλειά κάθε ομάδας, γι’ αυτό ανεβαίνει πιο γρήγορα απ’ ό,τι μικραίνει η δική σας λίστα.
κρίθηκαν 176 / 180 για να απαντήσετε: 0
Τελευταία καταμέτρηση: κρίθηκαν 176 · παραπέμφθηκαν σε διομαδικά πάνελ 1 · αμφισβητούμενα 0 · κάτω από την απαρτία 3 — τα πάνελ χρειάζονται τουλάχιστον max(2, 75% του πάνελ) ψήφους· το μικρότερο πάνελ σας έχει 15 μέλη.
κλείσιμο ✕
Operators are paid on parts per hour → επηρεάζει; → Batch traceability ends at the door
Δεν ειπώθηκε τίποτα ακόμη.
Ολοκληρωμένη φάση — η καταγραφή ζευγών και ψήφων βρίσκεται παραπάνω.Ελέγξτε τη λογική ↗
Batch traceability ends at the door→Temperature in the shop swings fifteen degrees between morning and afternoonανοιχτόσυζήτηση
…→Deburring is done by whoever is freeανοιχτό σε παραπομπήσυζήτηση
Setup sheets are in the setter's head, not on paper→New jobs are quoted from the last similar job, not from the drawingανοιχτόσυζήτηση
Maintenance is done when a machine stops→The customer's returns log and ours do not matchανοιχτόσυζήτηση
Rework is not counted anywhere→Quotes are won on price, so cycle times are cut to the bone✓ ναισυζήτηση
Customers changed their inspection method and never told us→Operators are paid on parts per hour✓ ναισυζήτηση
Customers changed their inspection method and never told us→Coolant is changed when it smells, not on a schedule✓ ναισυζήτηση
Quotes are won on price, so cycle times are cut to the bone→The oldest machine makes the tightest-tolerance part✓ ναισυζήτηση
Quotes are won on price, so cycle times are cut to the bone→Operators are paid on parts per hour✓ ναισυζήτηση
The same operator runs the same machine for years and nobody checks the settings→The drawing on the floor is not the revision the customer ordered✓ ναισυζήτηση
Tool wear is judged by ear→Deburring is done by whoever is free✓ ναισυζήτηση
Deburring is done by whoever is free→Parts that pass our inspection fail the customer's✓ ναισυζήτηση
Parts that pass our inspection fail the customer's→The customer's returns log and ours do not match✓ ναισυζήτηση
Deburring is done by whoever is free→The customer's returns log and ours do not match✓ συναγόμενοσυζήτηση
Quotes are won on price, so cycle times are cut to the bone→Coolant is changed when it smells, not on a schedule✗ όχισυζήτηση
Temperature in the shop swings fifteen degrees between morning and afternoon→Quotes are won on price, so cycle times are cut to the bone✗ όχισυζήτηση
Coolant is changed when it smells, not on a schedule→Quotes are won on price, so cycle times are cut to the bone✗ όχισυζήτηση
The same operator runs the same machine for years and nobody checks the settings→Temperature in the shop swings fifteen degrees between morning and afternoon✗ όχισυζήτηση
Rework is not counted anywhere→Temperature in the shop swings fifteen degrees between morning and afternoon✗ όχισυζήτηση
Rework is not counted anywhere→Customers changed their inspection method and never told us✗ όχισυζήτηση
The drawing on the floor is not the revision the customer ordered→The same operator runs the same machine for years and nobody checks the settings✗ όχισυζήτηση
The drawing on the floor is not the revision the customer ordered→The oldest machine makes the tightest-tolerance part✗ όχισυζήτηση
The drawing on the floor is not the revision the customer ordered→Coolant is changed when it smells, not on a schedule✗ όχισυζήτηση
The drawing on the floor is not the revision the customer ordered→Batch traceability ends at the door✗ όχισυζήτηση
Customers changed their inspection method and never told us→The oldest machine makes the tightest-tolerance part✗ όχισυζήτηση
Coolant is changed when it smells, not on a schedule→Customers changed their inspection method and never told us✗ όχισυζήτηση
The same operator runs the same machine for years and nobody checks the settings→Quotes are won on price, so cycle times are cut to the bone✗ όχισυζήτηση
Rework is not counted anywhere→The oldest machine makes the tightest-tolerance part✗ όχισυζήτηση
Temperature in the shop swings fifteen degrees between morning and afternoon→Operators are paid on parts per hour✗ όχισυζήτηση
The same operator runs the same machine for years and nobody checks the settings→Operators are paid on parts per hour✗ όχισυζήτηση
Batch traceability ends at the door→Quotes are won on price, so cycle times are cut to the bone✗ όχισυζήτηση
The drawing on the floor is not the revision the customer ordered→Customers changed their inspection method and never told us✗ όχισυζήτηση
Quotes are won on price, so cycle times are cut to the bone→Customers changed their inspection method and never told us✗ όχισυζήτηση
Temperature in the shop swings fifteen degrees between morning and afternoon→The oldest machine makes the tightest-tolerance part✗ όχισυζήτηση
Rework is not counted anywhere→Batch traceability ends at the door✗ όχισυζήτηση
The oldest machine makes the tightest-tolerance part→Temperature in the shop swings fifteen degrees between morning and afternoon✗ όχισυζήτηση
Coolant is changed when it smells, not on a schedule→The oldest machine makes the tightest-tolerance part✗ όχισυζήτηση
Operators are paid on parts per hour→The drawing on the floor is not the revision the customer ordered✗ όχισυζήτηση
The drawing on the floor is not the revision the customer ordered→Quotes are won on price, so cycle times are cut to the bone✗ όχισυζήτηση
Customers changed their inspection method and never told us→The drawing on the floor is not the revision the customer ordered✗ όχισυζήτηση
Quotes are won on price, so cycle times are cut to the bone→Rework is not counted anywhere✗ όχισυζήτηση
Customers changed their inspection method and never told us→Rework is not counted anywhere✗ όχισυζήτηση
Quotes are won on price, so cycle times are cut to the bone→Batch traceability ends at the door✗ όχισυζήτηση
The drawing on the floor is not the revision the customer ordered→Rework is not counted anywhere✗ όχισυζήτηση
Operators are paid on parts per hour→Rework is not counted anywhere✗ όχισυζήτηση
The oldest machine makes the tightest-tolerance part→Coolant is changed when it smells, not on a schedule✗ όχισυζήτηση
Coolant is changed when it smells, not on a schedule→Batch traceability ends at the door✗ όχισυζήτηση
Customers changed their inspection method and never told us→Temperature in the shop swings fifteen degrees between morning and afternoon✗ όχισυζήτηση
Customers changed their inspection method and never told us→Batch traceability ends at the door✗ όχισυζήτηση
Temperature in the shop swings fifteen degrees between morning and afternoon→Batch traceability ends at the door✗ όχισυζήτηση
Temperature in the shop swings fifteen degrees between morning and afternoon→Coolant is changed when it smells, not on a schedule✗ όχισυζήτηση
Batch traceability ends at the door→The oldest machine makes the tightest-tolerance part✗ όχισυζήτηση
Coolant is changed when it smells, not on a schedule→Rework is not counted anywhere✗ όχισυζήτηση
The oldest machine makes the tightest-tolerance part→The same operator runs the same machine for years and nobody checks the settings✗ όχισυζήτηση
Operators are paid on parts per hour→Temperature in the shop swings fifteen degrees between morning and afternoon✗ όχισυζήτηση
The same operator runs the same machine for years and nobody checks the settings→Customers changed their inspection method and never told us✗ όχισυζήτηση
Batch traceability ends at the door→Coolant is changed when it smells, not on a schedule✗ όχισυζήτηση
Operators are paid on parts per hour→Customers changed their inspection method and never told us✗ όχισυζήτηση
Batch traceability ends at the door→Customers changed their inspection method and never told us✗ όχισυζήτηση
Rework is not counted anywhere→The drawing on the floor is not the revision the customer ordered✗ όχισυζήτηση
Operators are paid on parts per hour→The oldest machine makes the tightest-tolerance part✗ όχισυζήτηση
Operators are paid on parts per hour→The same operator runs the same machine for years and nobody checks the settings✗ όχισυζήτηση
The oldest machine makes the tightest-tolerance part→Rework is not counted anywhere✗ όχισυζήτηση
Temperature in the shop swings fifteen degrees between morning and afternoon→The same operator runs the same machine for years and nobody checks the settings✗ όχισυζήτηση
Batch traceability ends at the door→Operators are paid on parts per hour✗ όχισυζήτηση
Temperature in the shop swings fifteen degrees between morning and afternoon→Customers changed their inspection method and never told us✗ όχισυζήτηση
Coolant is changed when it smells, not on a schedule→The drawing on the floor is not the revision the customer ordered✗ όχισυζήτηση
Operators are paid on parts per hour→Batch traceability ends at the door✗ όχισε εστίαση ↑ · κλείσιμο ✕
The oldest machine makes the tightest-tolerance part→Operators are paid on parts per hour✗ όχισυζήτηση
Quotes are won on price, so cycle times are cut to the bone→The drawing on the floor is not the revision the customer ordered✗ όχισυζήτηση
The oldest machine makes the tightest-tolerance part→The drawing on the floor is not the revision the customer ordered✗ όχισυζήτηση
Temperature in the shop swings fifteen degrees between morning and afternoon→Rework is not counted anywhere✗ όχισυζήτηση
Operators are paid on parts per hour→Quotes are won on price, so cycle times are cut to the bone✗ όχισυζήτηση
The oldest machine makes the tightest-tolerance part→Quotes are won on price, so cycle times are cut to the bone✗ όχισυζήτηση
The oldest machine makes the tightest-tolerance part→Batch traceability ends at the door✗ όχισυζήτηση
Rework is not counted anywhere→Operators are paid on parts per hour✗ όχισυζήτηση
Coolant is changed when it smells, not on a schedule→Temperature in the shop swings fifteen degrees between morning and afternoon✗ όχισυζήτηση
The same operator runs the same machine for years and nobody checks the settings→Batch traceability ends at the door✗ όχισυζήτηση
Coolant is changed when it smells, not on a schedule→The same operator runs the same machine for years and nobody checks the settings✗ όχισυζήτηση
Quotes are won on price, so cycle times are cut to the bone→Temperature in the shop swings fifteen degrees between morning and afternoon✗ όχισυζήτηση
The same operator runs the same machine for years and nobody checks the settings→Rework is not counted anywhere✗ όχισυζήτηση
Customers changed their inspection method and never told us→The same operator runs the same machine for years and nobody checks the settings✗ όχισυζήτηση
Rework is not counted anywhere→Coolant is changed when it smells, not on a schedule✗ όχισυζήτηση
Rework is not counted anywhere→The same operator runs the same machine for years and nobody checks the settings✗ όχισυζήτηση
The drawing on the floor is not the revision the customer ordered→Operators are paid on parts per hour✗ όχισυζήτηση
The same operator runs the same machine for years and nobody checks the settings→The oldest machine makes the tightest-tolerance part✗ όχισυζήτηση
Operators are paid on parts per hour→Coolant is changed when it smells, not on a schedule✗ όχισυζήτηση
The same operator runs the same machine for years and nobody checks the settings→Coolant is changed when it smells, not on a schedule✗ όχισυζήτηση
The oldest machine makes the tightest-tolerance part→Customers changed their inspection method and never told us✗ όχισυζήτηση
Batch traceability ends at the door→The same operator runs the same machine for years and nobody checks the settings✗ όχισυζήτηση
The drawing on the floor is not the revision the customer ordered→Temperature in the shop swings fifteen degrees between morning and afternoon✗ όχισυζήτηση
Coolant is changed when it smells, not on a schedule→Operators are paid on parts per hour✗ όχισυζήτηση
Customers changed their inspection method and never told us→Quotes are won on price, so cycle times are cut to the bone✗ όχισυζήτηση
Temperature in the shop swings fifteen degrees between morning and afternoon→The drawing on the floor is not the revision the customer ordered✗ όχισυζήτηση
Batch traceability ends at the door→Rework is not counted anywhere✗ όχισυζήτηση
Batch traceability ends at the door→The drawing on the floor is not the revision the customer ordered✗ όχισυζήτηση
Quotes are won on price, so cycle times are cut to the bone→The same operator runs the same machine for years and nobody checks the settings✗ όχισυζήτηση
Deburring is done by whoever is free→Setup sheets are in the setter's head, not on paper✗ όχισυζήτηση
Deburring is done by whoever is free→First-off inspection is skipped when the job is late✗ όχισυζήτηση
New jobs are quoted from the last similar job, not from the drawing→First-off inspection is skipped when the job is late✗ όχισυζήτηση
Deburring is done by whoever is free→…✗ όχισυζήτηση
First-off inspection is skipped when the job is late→…✗ όχισυζήτηση
The customer's returns log and ours do not match→…✗ όχισυζήτηση
Setup sheets are in the setter's head, not on paper→Maintenance is done when a machine stops✗ όχισυζήτηση
…→…✗ όχισυζήτηση
Maintenance is done when a machine stops→Deburring is done by whoever is free✗ όχισυζήτηση
The customer's returns log and ours do not match→Maintenance is done when a machine stops✗ όχισυζήτηση
Setup sheets are in the setter's head, not on paper→…✗ όχισυζήτηση
Deburring is done by whoever is free→Tool wear is judged by ear✗ όχισυζήτηση
…→Parts that pass our inspection fail the customer's✗ όχισυζήτηση
Tool wear is judged by ear→New jobs are quoted from the last similar job, not from the drawing✗ όχισυζήτηση
New jobs are quoted from the last similar job, not from the drawing→…✗ όχισυζήτηση
The customer's returns log and ours do not match→First-off inspection is skipped when the job is late✗ όχισυζήτηση
…→New jobs are quoted from the last similar job, not from the drawing✗ όχισυζήτηση
Setup sheets are in the setter's head, not on paper→Tool wear is judged by ear✗ όχισυζήτηση
The customer's returns log and ours do not match→Parts that pass our inspection fail the customer's✗ όχισυζήτηση
Parts that pass our inspection fail the customer's→Deburring is done by whoever is free✗ όχισυζήτηση
Tool wear is judged by ear→Maintenance is done when a machine stops✗ όχισυζήτηση
…→Tool wear is judged by ear✗ όχισυζήτηση
First-off inspection is skipped when the job is late→Deburring is done by whoever is free✗ όχισυζήτηση
…→The customer's returns log and ours do not match✗ όχισυζήτηση
Tool wear is judged by ear→Parts that pass our inspection fail the customer's✗ όχισυζήτηση
The customer's returns log and ours do not match→Tool wear is judged by ear✗ όχισυζήτηση
Tool wear is judged by ear→…✗ όχισυζήτηση
Maintenance is done when a machine stops→Setup sheets are in the setter's head, not on paper✗ όχισυζήτηση
First-off inspection is skipped when the job is late→Maintenance is done when a machine stops✗ όχισυζήτηση
The customer's returns log and ours do not match→Deburring is done by whoever is free✗ όχισυζήτηση
Parts that pass our inspection fail the customer's→Tool wear is judged by ear✗ όχισυζήτηση
Parts that pass our inspection fail the customer's→Setup sheets are in the setter's head, not on paper✗ όχισυζήτηση
The customer's returns log and ours do not match→Setup sheets are in the setter's head, not on paper✗ όχισυζήτηση
Setup sheets are in the setter's head, not on paper→Deburring is done by whoever is free✗ όχισυζήτηση
Parts that pass our inspection fail the customer's→Maintenance is done when a machine stops✗ όχισυζήτηση
First-off inspection is skipped when the job is late→Parts that pass our inspection fail the customer's✗ όχισυζήτηση
The customer's returns log and ours do not match→…✗ όχισυζήτηση
Tool wear is judged by ear→Setup sheets are in the setter's head, not on paper✗ όχισυζήτηση
Maintenance is done when a machine stops→First-off inspection is skipped when the job is late✗ όχισυζήτηση
…→Setup sheets are in the setter's head, not on paper✗ όχισυζήτηση
Setup sheets are in the setter's head, not on paper→Parts that pass our inspection fail the customer's✗ όχισυζήτηση
Deburring is done by whoever is free→…✗ όχισυζήτηση
…→Maintenance is done when a machine stops✗ όχισυζήτηση
Maintenance is done when a machine stops→Tool wear is judged by ear✗ όχισυζήτηση
New jobs are quoted from the last similar job, not from the drawing→Deburring is done by whoever is free✗ όχισυζήτηση
Tool wear is judged by ear→The customer's returns log and ours do not match✗ όχισυζήτηση
Deburring is done by whoever is free→Maintenance is done when a machine stops✗ όχισυζήτηση
New jobs are quoted from the last similar job, not from the drawing→Parts that pass our inspection fail the customer's✗ όχισυζήτηση
Parts that pass our inspection fail the customer's→New jobs are quoted from the last similar job, not from the drawing✗ όχισυζήτηση
The customer's returns log and ours do not match→New jobs are quoted from the last similar job, not from the drawing✗ όχισυζήτηση
…→Setup sheets are in the setter's head, not on paper✗ όχισυζήτηση
First-off inspection is skipped when the job is late→New jobs are quoted from the last similar job, not from the drawing✗ όχισυζήτηση
…→Maintenance is done when a machine stops✗ όχισυζήτηση
Parts that pass our inspection fail the customer's→…✗ όχισυζήτηση
First-off inspection is skipped when the job is late→Setup sheets are in the setter's head, not on paper✗ όχισυζήτηση
…→…✗ όχισυζήτηση
New jobs are quoted from the last similar job, not from the drawing→Setup sheets are in the setter's head, not on paper✗ όχισυζήτηση
New jobs are quoted from the last similar job, not from the drawing→Tool wear is judged by ear✗ όχισυζήτηση
Maintenance is done when a machine stops→Parts that pass our inspection fail the customer's✗ όχισυζήτηση
First-off inspection is skipped when the job is late→The customer's returns log and ours do not match✗ όχισυζήτηση
Maintenance is done when a machine stops→New jobs are quoted from the last similar job, not from the drawing✗ όχισυζήτηση
Maintenance is done when a machine stops→…✗ όχισυζήτηση
First-off inspection is skipped when the job is late→Tool wear is judged by ear✗ όχισυζήτηση
New jobs are quoted from the last similar job, not from the drawing→…✗ όχισυζήτηση
…→Tool wear is judged by ear✗ όχισυζήτηση
Deburring is done by whoever is free→New jobs are quoted from the last similar job, not from the drawing✗ όχισυζήτηση
Parts that pass our inspection fail the customer's→First-off inspection is skipped when the job is late✗ όχισυζήτηση
…→First-off inspection is skipped when the job is late✗ όχισυζήτηση
…→First-off inspection is skipped when the job is late✗ όχισυζήτηση
…→Parts that pass our inspection fail the customer's✗ όχισυζήτηση
Setup sheets are in the setter's head, not on paper→First-off inspection is skipped when the job is late✗ όχισυζήτηση
First-off inspection is skipped when the job is late→…✗ όχισυζήτηση
Tool wear is judged by ear→…✗ όχισυζήτηση
New jobs are quoted from the last similar job, not from the drawing→The customer's returns log and ours do not match✗ όχισυζήτηση
Tool wear is judged by ear→First-off inspection is skipped when the job is late✗ όχισυζήτηση
…→The customer's returns log and ours do not match✗ όχισυζήτηση
…→Deburring is done by whoever is free✗ όχισυζήτηση
Setup sheets are in the setter's head, not on paper→…✗ όχισυζήτηση
…→New jobs are quoted from the last similar job, not from the drawing✗ όχισυζήτηση
Setup sheets are in the setter's head, not on paper→The customer's returns log and ours do not match✗ όχισυζήτηση
New jobs are quoted from the last similar job, not from the drawing→Maintenance is done when a machine stops✗ όχισυζήτηση
Maintenance is done when a machine stops→…✗ όχισυζήτηση
Parts that pass our inspection fail the customer's→…✗ όχισυζήτηση