PERTANYAANNYA
Why do parts that passed inspection come back?
Apakah yang satu sangat memengaruhi yang lain? Tiga perempat dari suara yang masuk menentukan.
ditutup · kembali ke tahap Tindakan
Melihat sebagai tamu. Masukkan nama pengguna untuk bergabung dan ikut serta.
Pertanyaan dibagi di antara kelompok, jadi Anda mendapat pertanyaan yang diberikan kepada kelompok Anda — tidak semua 180.
176 / 180 tuntas 0 untuk Anda jawab mengapa
Tidak ada yang sanggup menjawab ratusan pasangan. Setiap pasangan diberikan kepada satu kelompok; pasangan yang membuat panel terbelah lalu dirujuk ke kelompok lain, jadi pasangan itu bisa muncul di daftar Anda belakangan meskipun berasal dari tempat lain. Jumlah yang tuntas mencakup kerja semua kelompok, karena itulah angkanya naik lebih cepat daripada daftar Anda berkurang.
Penghitungan terakhir: 176 diputuskan · 1 diteruskan ke panel lintas kelompok · 0 diperdebatkan · 3 di bawah kuorum — panel memerlukan setidaknya max(2, 75% panel) suara masuk; panel terkecil Anda beranggotakan 15 orang.
Temperature in the shop swings fifteen degrees between morning and afternoon → memengaruhi? → The oldest machine makes the tightest-tolerance part
Belum ada yang berbicara.
Tahap sudah selesai — catatan pasangan dan suara ada di atas.Periksa logikanya ↗
| Batch traceability ends at the door | → | Temperature in the shop swings fifteen degrees between morning and afternoon | terbuka | diskusikan |
| … | → | Deburring is done by whoever is free | terbuka diteruskan | diskusikan |
| Setup sheets are in the setter's head, not on paper | → | New jobs are quoted from the last similar job, not from the drawing | terbuka | diskusikan |
| Maintenance is done when a machine stops | → | The customer's returns log and ours do not match | terbuka | diskusikan |
| Rework is not counted anywhere | → | Quotes are won on price, so cycle times are cut to the bone | ✓ ya | diskusikan |
| Customers changed their inspection method and never told us | → | Operators are paid on parts per hour | ✓ ya | diskusikan |
| Customers changed their inspection method and never told us | → | Coolant is changed when it smells, not on a schedule | ✓ ya | diskusikan |
| Quotes are won on price, so cycle times are cut to the bone | → | The oldest machine makes the tightest-tolerance part | ✓ ya | diskusikan |
| Quotes are won on price, so cycle times are cut to the bone | → | Operators are paid on parts per hour | ✓ ya | diskusikan |
| The same operator runs the same machine for years and nobody checks the settings | → | The drawing on the floor is not the revision the customer ordered | ✓ ya | diskusikan |
| Tool wear is judged by ear | → | Deburring is done by whoever is free | ✓ ya | diskusikan |
| Deburring is done by whoever is free | → | Parts that pass our inspection fail the customer's | ✓ ya | diskusikan |
| Parts that pass our inspection fail the customer's | → | The customer's returns log and ours do not match | ✓ ya | diskusikan |
| Deburring is done by whoever is free | → | The customer's returns log and ours do not match | ✓ disimpulkan | diskusikan |
| Quotes are won on price, so cycle times are cut to the bone | → | Coolant is changed when it smells, not on a schedule | ✗ tidak | diskusikan |
| Temperature in the shop swings fifteen degrees between morning and afternoon | → | Quotes are won on price, so cycle times are cut to the bone | ✗ tidak | diskusikan |
| Coolant is changed when it smells, not on a schedule | → | Quotes are won on price, so cycle times are cut to the bone | ✗ tidak | diskusikan |
| The same operator runs the same machine for years and nobody checks the settings | → | Temperature in the shop swings fifteen degrees between morning and afternoon | ✗ tidak | diskusikan |
| Rework is not counted anywhere | → | Temperature in the shop swings fifteen degrees between morning and afternoon | ✗ tidak | diskusikan |
| Rework is not counted anywhere | → | Customers changed their inspection method and never told us | ✗ tidak | diskusikan |
| The drawing on the floor is not the revision the customer ordered | → | The same operator runs the same machine for years and nobody checks the settings | ✗ tidak | diskusikan |
| The drawing on the floor is not the revision the customer ordered | → | The oldest machine makes the tightest-tolerance part | ✗ tidak | diskusikan |
| The drawing on the floor is not the revision the customer ordered | → | Coolant is changed when it smells, not on a schedule | ✗ tidak | diskusikan |
| The drawing on the floor is not the revision the customer ordered | → | Batch traceability ends at the door | ✗ tidak | diskusikan |
| Customers changed their inspection method and never told us | → | The oldest machine makes the tightest-tolerance part | ✗ tidak | diskusikan |
| Coolant is changed when it smells, not on a schedule | → | Customers changed their inspection method and never told us | ✗ tidak | diskusikan |
| The same operator runs the same machine for years and nobody checks the settings | → | Quotes are won on price, so cycle times are cut to the bone | ✗ tidak | diskusikan |
| Rework is not counted anywhere | → | The oldest machine makes the tightest-tolerance part | ✗ tidak | diskusikan |
| Temperature in the shop swings fifteen degrees between morning and afternoon | → | Operators are paid on parts per hour | ✗ tidak | diskusikan |
| The same operator runs the same machine for years and nobody checks the settings | → | Operators are paid on parts per hour | ✗ tidak | diskusikan |
| Batch traceability ends at the door | → | Quotes are won on price, so cycle times are cut to the bone | ✗ tidak | diskusikan |
| The drawing on the floor is not the revision the customer ordered | → | Customers changed their inspection method and never told us | ✗ tidak | diskusikan |
| Quotes are won on price, so cycle times are cut to the bone | → | Customers changed their inspection method and never told us | ✗ tidak | diskusikan |
| Temperature in the shop swings fifteen degrees between morning and afternoon | → | The oldest machine makes the tightest-tolerance part | ✗ tidak | disorot ↑ · tutup ✕ |
| Rework is not counted anywhere | → | Batch traceability ends at the door | ✗ tidak | diskusikan |
| The oldest machine makes the tightest-tolerance part | → | Temperature in the shop swings fifteen degrees between morning and afternoon | ✗ tidak | diskusikan |
| Coolant is changed when it smells, not on a schedule | → | The oldest machine makes the tightest-tolerance part | ✗ tidak | diskusikan |
| Operators are paid on parts per hour | → | The drawing on the floor is not the revision the customer ordered | ✗ tidak | diskusikan |
| The drawing on the floor is not the revision the customer ordered | → | Quotes are won on price, so cycle times are cut to the bone | ✗ tidak | diskusikan |
| Customers changed their inspection method and never told us | → | The drawing on the floor is not the revision the customer ordered | ✗ tidak | diskusikan |
| Quotes are won on price, so cycle times are cut to the bone | → | Rework is not counted anywhere | ✗ tidak | diskusikan |
| Customers changed their inspection method and never told us | → | Rework is not counted anywhere | ✗ tidak | diskusikan |
| Quotes are won on price, so cycle times are cut to the bone | → | Batch traceability ends at the door | ✗ tidak | diskusikan |
| The drawing on the floor is not the revision the customer ordered | → | Rework is not counted anywhere | ✗ tidak | diskusikan |
| Operators are paid on parts per hour | → | Rework is not counted anywhere | ✗ tidak | diskusikan |
| The oldest machine makes the tightest-tolerance part | → | Coolant is changed when it smells, not on a schedule | ✗ tidak | diskusikan |
| Coolant is changed when it smells, not on a schedule | → | Batch traceability ends at the door | ✗ tidak | diskusikan |
| Customers changed their inspection method and never told us | → | Temperature in the shop swings fifteen degrees between morning and afternoon | ✗ tidak | diskusikan |
| Customers changed their inspection method and never told us | → | Batch traceability ends at the door | ✗ tidak | diskusikan |
| Temperature in the shop swings fifteen degrees between morning and afternoon | → | Batch traceability ends at the door | ✗ tidak | diskusikan |
| Temperature in the shop swings fifteen degrees between morning and afternoon | → | Coolant is changed when it smells, not on a schedule | ✗ tidak | diskusikan |
| Batch traceability ends at the door | → | The oldest machine makes the tightest-tolerance part | ✗ tidak | diskusikan |
| Coolant is changed when it smells, not on a schedule | → | Rework is not counted anywhere | ✗ tidak | diskusikan |
| The oldest machine makes the tightest-tolerance part | → | The same operator runs the same machine for years and nobody checks the settings | ✗ tidak | diskusikan |
| Operators are paid on parts per hour | → | Temperature in the shop swings fifteen degrees between morning and afternoon | ✗ tidak | diskusikan |
| The same operator runs the same machine for years and nobody checks the settings | → | Customers changed their inspection method and never told us | ✗ tidak | diskusikan |
| Batch traceability ends at the door | → | Coolant is changed when it smells, not on a schedule | ✗ tidak | diskusikan |
| Operators are paid on parts per hour | → | Customers changed their inspection method and never told us | ✗ tidak | diskusikan |
| Batch traceability ends at the door | → | Customers changed their inspection method and never told us | ✗ tidak | diskusikan |
| Rework is not counted anywhere | → | The drawing on the floor is not the revision the customer ordered | ✗ tidak | diskusikan |
| Operators are paid on parts per hour | → | The oldest machine makes the tightest-tolerance part | ✗ tidak | diskusikan |
| Operators are paid on parts per hour | → | The same operator runs the same machine for years and nobody checks the settings | ✗ tidak | diskusikan |
| The oldest machine makes the tightest-tolerance part | → | Rework is not counted anywhere | ✗ tidak | diskusikan |
| Temperature in the shop swings fifteen degrees between morning and afternoon | → | The same operator runs the same machine for years and nobody checks the settings | ✗ tidak | diskusikan |
| Batch traceability ends at the door | → | Operators are paid on parts per hour | ✗ tidak | diskusikan |
| Temperature in the shop swings fifteen degrees between morning and afternoon | → | Customers changed their inspection method and never told us | ✗ tidak | diskusikan |
| Coolant is changed when it smells, not on a schedule | → | The drawing on the floor is not the revision the customer ordered | ✗ tidak | diskusikan |
| Operators are paid on parts per hour | → | Batch traceability ends at the door | ✗ tidak | diskusikan |
| The oldest machine makes the tightest-tolerance part | → | Operators are paid on parts per hour | ✗ tidak | diskusikan |
| Quotes are won on price, so cycle times are cut to the bone | → | The drawing on the floor is not the revision the customer ordered | ✗ tidak | diskusikan |
| The oldest machine makes the tightest-tolerance part | → | The drawing on the floor is not the revision the customer ordered | ✗ tidak | diskusikan |
| Temperature in the shop swings fifteen degrees between morning and afternoon | → | Rework is not counted anywhere | ✗ tidak | diskusikan |
| Operators are paid on parts per hour | → | Quotes are won on price, so cycle times are cut to the bone | ✗ tidak | diskusikan |
| The oldest machine makes the tightest-tolerance part | → | Quotes are won on price, so cycle times are cut to the bone | ✗ tidak | diskusikan |
| The oldest machine makes the tightest-tolerance part | → | Batch traceability ends at the door | ✗ tidak | diskusikan |
| Rework is not counted anywhere | → | Operators are paid on parts per hour | ✗ tidak | diskusikan |
| Coolant is changed when it smells, not on a schedule | → | Temperature in the shop swings fifteen degrees between morning and afternoon | ✗ tidak | diskusikan |
| The same operator runs the same machine for years and nobody checks the settings | → | Batch traceability ends at the door | ✗ tidak | diskusikan |
| Coolant is changed when it smells, not on a schedule | → | The same operator runs the same machine for years and nobody checks the settings | ✗ tidak | diskusikan |
| Quotes are won on price, so cycle times are cut to the bone | → | Temperature in the shop swings fifteen degrees between morning and afternoon | ✗ tidak | diskusikan |
| The same operator runs the same machine for years and nobody checks the settings | → | Rework is not counted anywhere | ✗ tidak | diskusikan |
| Customers changed their inspection method and never told us | → | The same operator runs the same machine for years and nobody checks the settings | ✗ tidak | diskusikan |
| Rework is not counted anywhere | → | Coolant is changed when it smells, not on a schedule | ✗ tidak | diskusikan |
| Rework is not counted anywhere | → | The same operator runs the same machine for years and nobody checks the settings | ✗ tidak | diskusikan |
| The drawing on the floor is not the revision the customer ordered | → | Operators are paid on parts per hour | ✗ tidak | diskusikan |
| The same operator runs the same machine for years and nobody checks the settings | → | The oldest machine makes the tightest-tolerance part | ✗ tidak | diskusikan |
| Operators are paid on parts per hour | → | Coolant is changed when it smells, not on a schedule | ✗ tidak | diskusikan |
| The same operator runs the same machine for years and nobody checks the settings | → | Coolant is changed when it smells, not on a schedule | ✗ tidak | diskusikan |
| The oldest machine makes the tightest-tolerance part | → | Customers changed their inspection method and never told us | ✗ tidak | diskusikan |
| Batch traceability ends at the door | → | The same operator runs the same machine for years and nobody checks the settings | ✗ tidak | diskusikan |
| The drawing on the floor is not the revision the customer ordered | → | Temperature in the shop swings fifteen degrees between morning and afternoon | ✗ tidak | diskusikan |
| Coolant is changed when it smells, not on a schedule | → | Operators are paid on parts per hour | ✗ tidak | diskusikan |
| Customers changed their inspection method and never told us | → | Quotes are won on price, so cycle times are cut to the bone | ✗ tidak | diskusikan |
| Temperature in the shop swings fifteen degrees between morning and afternoon | → | The drawing on the floor is not the revision the customer ordered | ✗ tidak | diskusikan |
| Batch traceability ends at the door | → | Rework is not counted anywhere | ✗ tidak | diskusikan |
| Batch traceability ends at the door | → | The drawing on the floor is not the revision the customer ordered | ✗ tidak | diskusikan |
| Quotes are won on price, so cycle times are cut to the bone | → | The same operator runs the same machine for years and nobody checks the settings | ✗ tidak | diskusikan |
| Deburring is done by whoever is free | → | Setup sheets are in the setter's head, not on paper | ✗ tidak | diskusikan |
| Deburring is done by whoever is free | → | First-off inspection is skipped when the job is late | ✗ tidak | diskusikan |
| New jobs are quoted from the last similar job, not from the drawing | → | First-off inspection is skipped when the job is late | ✗ tidak | diskusikan |
| Deburring is done by whoever is free | → | … | ✗ tidak | diskusikan |
| First-off inspection is skipped when the job is late | → | … | ✗ tidak | diskusikan |
| The customer's returns log and ours do not match | → | … | ✗ tidak | diskusikan |
| Setup sheets are in the setter's head, not on paper | → | Maintenance is done when a machine stops | ✗ tidak | diskusikan |
| … | → | … | ✗ tidak | diskusikan |
| Maintenance is done when a machine stops | → | Deburring is done by whoever is free | ✗ tidak | diskusikan |
| The customer's returns log and ours do not match | → | Maintenance is done when a machine stops | ✗ tidak | diskusikan |
| Setup sheets are in the setter's head, not on paper | → | … | ✗ tidak | diskusikan |
| Deburring is done by whoever is free | → | Tool wear is judged by ear | ✗ tidak | diskusikan |
| … | → | Parts that pass our inspection fail the customer's | ✗ tidak | diskusikan |
| Tool wear is judged by ear | → | New jobs are quoted from the last similar job, not from the drawing | ✗ tidak | diskusikan |
| New jobs are quoted from the last similar job, not from the drawing | → | … | ✗ tidak | diskusikan |
| The customer's returns log and ours do not match | → | First-off inspection is skipped when the job is late | ✗ tidak | diskusikan |
| … | → | New jobs are quoted from the last similar job, not from the drawing | ✗ tidak | diskusikan |
| Setup sheets are in the setter's head, not on paper | → | Tool wear is judged by ear | ✗ tidak | diskusikan |
| The customer's returns log and ours do not match | → | Parts that pass our inspection fail the customer's | ✗ tidak | diskusikan |
| Parts that pass our inspection fail the customer's | → | Deburring is done by whoever is free | ✗ tidak | diskusikan |
| Tool wear is judged by ear | → | Maintenance is done when a machine stops | ✗ tidak | diskusikan |
| … | → | Tool wear is judged by ear | ✗ tidak | diskusikan |
| First-off inspection is skipped when the job is late | → | Deburring is done by whoever is free | ✗ tidak | diskusikan |
| … | → | The customer's returns log and ours do not match | ✗ tidak | diskusikan |
| Tool wear is judged by ear | → | Parts that pass our inspection fail the customer's | ✗ tidak | diskusikan |
| The customer's returns log and ours do not match | → | Tool wear is judged by ear | ✗ tidak | diskusikan |
| Tool wear is judged by ear | → | … | ✗ tidak | diskusikan |
| Maintenance is done when a machine stops | → | Setup sheets are in the setter's head, not on paper | ✗ tidak | diskusikan |
| First-off inspection is skipped when the job is late | → | Maintenance is done when a machine stops | ✗ tidak | diskusikan |
| The customer's returns log and ours do not match | → | Deburring is done by whoever is free | ✗ tidak | diskusikan |
| Parts that pass our inspection fail the customer's | → | Tool wear is judged by ear | ✗ tidak | diskusikan |
| Parts that pass our inspection fail the customer's | → | Setup sheets are in the setter's head, not on paper | ✗ tidak | diskusikan |
| The customer's returns log and ours do not match | → | Setup sheets are in the setter's head, not on paper | ✗ tidak | diskusikan |
| Setup sheets are in the setter's head, not on paper | → | Deburring is done by whoever is free | ✗ tidak | diskusikan |
| Parts that pass our inspection fail the customer's | → | Maintenance is done when a machine stops | ✗ tidak | diskusikan |
| First-off inspection is skipped when the job is late | → | Parts that pass our inspection fail the customer's | ✗ tidak | diskusikan |
| The customer's returns log and ours do not match | → | … | ✗ tidak | diskusikan |
| Tool wear is judged by ear | → | Setup sheets are in the setter's head, not on paper | ✗ tidak | diskusikan |
| Maintenance is done when a machine stops | → | First-off inspection is skipped when the job is late | ✗ tidak | diskusikan |
| … | → | Setup sheets are in the setter's head, not on paper | ✗ tidak | diskusikan |
| Setup sheets are in the setter's head, not on paper | → | Parts that pass our inspection fail the customer's | ✗ tidak | diskusikan |
| Deburring is done by whoever is free | → | … | ✗ tidak | diskusikan |
| … | → | Maintenance is done when a machine stops | ✗ tidak | diskusikan |
| Maintenance is done when a machine stops | → | Tool wear is judged by ear | ✗ tidak | diskusikan |
| New jobs are quoted from the last similar job, not from the drawing | → | Deburring is done by whoever is free | ✗ tidak | diskusikan |
| Tool wear is judged by ear | → | The customer's returns log and ours do not match | ✗ tidak | diskusikan |
| Deburring is done by whoever is free | → | Maintenance is done when a machine stops | ✗ tidak | diskusikan |
| New jobs are quoted from the last similar job, not from the drawing | → | Parts that pass our inspection fail the customer's | ✗ tidak | diskusikan |
| Parts that pass our inspection fail the customer's | → | New jobs are quoted from the last similar job, not from the drawing | ✗ tidak | diskusikan |
| The customer's returns log and ours do not match | → | New jobs are quoted from the last similar job, not from the drawing | ✗ tidak | diskusikan |
| … | → | Setup sheets are in the setter's head, not on paper | ✗ tidak | diskusikan |
| First-off inspection is skipped when the job is late | → | New jobs are quoted from the last similar job, not from the drawing | ✗ tidak | diskusikan |
| … | → | Maintenance is done when a machine stops | ✗ tidak | diskusikan |
| Parts that pass our inspection fail the customer's | → | … | ✗ tidak | diskusikan |
| First-off inspection is skipped when the job is late | → | Setup sheets are in the setter's head, not on paper | ✗ tidak | diskusikan |
| … | → | … | ✗ tidak | diskusikan |
| New jobs are quoted from the last similar job, not from the drawing | → | Setup sheets are in the setter's head, not on paper | ✗ tidak | diskusikan |
| New jobs are quoted from the last similar job, not from the drawing | → | Tool wear is judged by ear | ✗ tidak | diskusikan |
| Maintenance is done when a machine stops | → | Parts that pass our inspection fail the customer's | ✗ tidak | diskusikan |
| First-off inspection is skipped when the job is late | → | The customer's returns log and ours do not match | ✗ tidak | diskusikan |
| Maintenance is done when a machine stops | → | New jobs are quoted from the last similar job, not from the drawing | ✗ tidak | diskusikan |
| Maintenance is done when a machine stops | → | … | ✗ tidak | diskusikan |
| First-off inspection is skipped when the job is late | → | Tool wear is judged by ear | ✗ tidak | diskusikan |
| New jobs are quoted from the last similar job, not from the drawing | → | … | ✗ tidak | diskusikan |
| … | → | Tool wear is judged by ear | ✗ tidak | diskusikan |
| Deburring is done by whoever is free | → | New jobs are quoted from the last similar job, not from the drawing | ✗ tidak | diskusikan |
| Parts that pass our inspection fail the customer's | → | First-off inspection is skipped when the job is late | ✗ tidak | diskusikan |
| … | → | First-off inspection is skipped when the job is late | ✗ tidak | diskusikan |
| … | → | First-off inspection is skipped when the job is late | ✗ tidak | diskusikan |
| … | → | Parts that pass our inspection fail the customer's | ✗ tidak | diskusikan |
| Setup sheets are in the setter's head, not on paper | → | First-off inspection is skipped when the job is late | ✗ tidak | diskusikan |
| First-off inspection is skipped when the job is late | → | … | ✗ tidak | diskusikan |
| Tool wear is judged by ear | → | … | ✗ tidak | diskusikan |
| New jobs are quoted from the last similar job, not from the drawing | → | The customer's returns log and ours do not match | ✗ tidak | diskusikan |
| Tool wear is judged by ear | → | First-off inspection is skipped when the job is late | ✗ tidak | diskusikan |
| … | → | The customer's returns log and ours do not match | ✗ tidak | diskusikan |
| … | → | Deburring is done by whoever is free | ✗ tidak | diskusikan |
| Setup sheets are in the setter's head, not on paper | → | … | ✗ tidak | diskusikan |
| … | → | New jobs are quoted from the last similar job, not from the drawing | ✗ tidak | diskusikan |
| Setup sheets are in the setter's head, not on paper | → | The customer's returns log and ours do not match | ✗ tidak | diskusikan |
| New jobs are quoted from the last similar job, not from the drawing | → | Maintenance is done when a machine stops | ✗ tidak | diskusikan |
| Maintenance is done when a machine stops | → | … | ✗ tidak | diskusikan |
| Parts that pass our inspection fail the customer's | → | … | ✗ tidak | diskusikan |