Cấu trúc · Why do parts that passed inspection come back?

CÂU HỎI

Why do parts that passed inspection come back?

Liệu cái này có ảnh hưởng đáng kể đến cái kia không? Ba phần tư số phiếu đã bỏ sẽ quyết định.

Đang xem với tư cách khách. Nhập tên người dùng để vào và tham gia.

Các câu hỏi được chia cho các nhóm, nên bạn nhận những câu được giao cho nhóm mình — không phải cả 180 câu.

vì sao

Không ai trả lời nổi vài trăm cặp thẻ. Mỗi cặp được giao cho một nhóm; cặp nào bị chia rẽ sẽ được chuyển sang các nhóm khác, nên nó có thể xuất hiện trong danh sách của bạn sau này dù bắt đầu ở nơi khác. Số đã ngã ngũ tính cả công việc của mọi nhóm, vì vậy nó tăng nhanh hơn tốc độ danh sách của bạn ngắn lại.

176 / 180 đã ngã ngũ 0 câu chờ bạn trả lời

Lần kiểm phiếu gần nhất: 176 đã quyết · 1 chuyển lên hội đồng liên nhóm · 0 còn tranh cãi · 3 chưa đủ số người tối thiểu — hội đồng cần ít nhất max(2, 75% hội đồng) phiếu đã bỏ; hội đồng nhỏ nhất của bạn có 15 thành viên.

đóng ✕

Rework is not counted anywhere → ảnh hưởng? → Customers changed their inspection method and never told us

Chưa ai nói gì.

Giai đoạn đã xong — hồ sơ các cặp thẻ và phiếu bầu nằm ở trên.Kiểm tra lập luận ↗

Batch traceability ends at the door	→	Temperature in the shop swings fifteen degrees between morning and afternoon	đang mở	thảo luận
…	→	Deburring is done by whoever is free	đang mở đã chuyển lên	thảo luận
Setup sheets are in the setter's head, not on paper	→	New jobs are quoted from the last similar job, not from the drawing	đang mở	thảo luận
Maintenance is done when a machine stops	→	The customer's returns log and ours do not match	đang mở	thảo luận
Rework is not counted anywhere	→	Quotes are won on price, so cycle times are cut to the bone	✓ có	thảo luận
Customers changed their inspection method and never told us	→	Operators are paid on parts per hour	✓ có	thảo luận
Customers changed their inspection method and never told us	→	Coolant is changed when it smells, not on a schedule	✓ có	thảo luận
Quotes are won on price, so cycle times are cut to the bone	→	The oldest machine makes the tightest-tolerance part	✓ có	thảo luận
Quotes are won on price, so cycle times are cut to the bone	→	Operators are paid on parts per hour	✓ có	thảo luận
The same operator runs the same machine for years and nobody checks the settings	→	The drawing on the floor is not the revision the customer ordered	✓ có	thảo luận
Tool wear is judged by ear	→	Deburring is done by whoever is free	✓ có	thảo luận
Deburring is done by whoever is free	→	Parts that pass our inspection fail the customer's	✓ có	thảo luận
Parts that pass our inspection fail the customer's	→	The customer's returns log and ours do not match	✓ có	thảo luận
Deburring is done by whoever is free	→	The customer's returns log and ours do not match	✓ suy ra	thảo luận
Quotes are won on price, so cycle times are cut to the bone	→	Coolant is changed when it smells, not on a schedule	✗ không	thảo luận
Temperature in the shop swings fifteen degrees between morning and afternoon	→	Quotes are won on price, so cycle times are cut to the bone	✗ không	thảo luận
Coolant is changed when it smells, not on a schedule	→	Quotes are won on price, so cycle times are cut to the bone	✗ không	thảo luận
The same operator runs the same machine for years and nobody checks the settings	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ không	thảo luận
Rework is not counted anywhere	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ không	thảo luận
Rework is not counted anywhere	→	Customers changed their inspection method and never told us	✗ không	đang mở ↑ · đóng ✕
The drawing on the floor is not the revision the customer ordered	→	The same operator runs the same machine for years and nobody checks the settings	✗ không	thảo luận
The drawing on the floor is not the revision the customer ordered	→	The oldest machine makes the tightest-tolerance part	✗ không	thảo luận
The drawing on the floor is not the revision the customer ordered	→	Coolant is changed when it smells, not on a schedule	✗ không	thảo luận
The drawing on the floor is not the revision the customer ordered	→	Batch traceability ends at the door	✗ không	thảo luận
Customers changed their inspection method and never told us	→	The oldest machine makes the tightest-tolerance part	✗ không	thảo luận
Coolant is changed when it smells, not on a schedule	→	Customers changed their inspection method and never told us	✗ không	thảo luận
The same operator runs the same machine for years and nobody checks the settings	→	Quotes are won on price, so cycle times are cut to the bone	✗ không	thảo luận
Rework is not counted anywhere	→	The oldest machine makes the tightest-tolerance part	✗ không	thảo luận
Temperature in the shop swings fifteen degrees between morning and afternoon	→	Operators are paid on parts per hour	✗ không	thảo luận
The same operator runs the same machine for years and nobody checks the settings	→	Operators are paid on parts per hour	✗ không	thảo luận
Batch traceability ends at the door	→	Quotes are won on price, so cycle times are cut to the bone	✗ không	thảo luận
The drawing on the floor is not the revision the customer ordered	→	Customers changed their inspection method and never told us	✗ không	thảo luận
Quotes are won on price, so cycle times are cut to the bone	→	Customers changed their inspection method and never told us	✗ không	thảo luận
Temperature in the shop swings fifteen degrees between morning and afternoon	→	The oldest machine makes the tightest-tolerance part	✗ không	thảo luận
Rework is not counted anywhere	→	Batch traceability ends at the door	✗ không	thảo luận
The oldest machine makes the tightest-tolerance part	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ không	thảo luận
Coolant is changed when it smells, not on a schedule	→	The oldest machine makes the tightest-tolerance part	✗ không	thảo luận
Operators are paid on parts per hour	→	The drawing on the floor is not the revision the customer ordered	✗ không	thảo luận
The drawing on the floor is not the revision the customer ordered	→	Quotes are won on price, so cycle times are cut to the bone	✗ không	thảo luận
Customers changed their inspection method and never told us	→	The drawing on the floor is not the revision the customer ordered	✗ không	thảo luận
Quotes are won on price, so cycle times are cut to the bone	→	Rework is not counted anywhere	✗ không	thảo luận
Customers changed their inspection method and never told us	→	Rework is not counted anywhere	✗ không	thảo luận
Quotes are won on price, so cycle times are cut to the bone	→	Batch traceability ends at the door	✗ không	thảo luận
The drawing on the floor is not the revision the customer ordered	→	Rework is not counted anywhere	✗ không	thảo luận
Operators are paid on parts per hour	→	Rework is not counted anywhere	✗ không	thảo luận
The oldest machine makes the tightest-tolerance part	→	Coolant is changed when it smells, not on a schedule	✗ không	thảo luận
Coolant is changed when it smells, not on a schedule	→	Batch traceability ends at the door	✗ không	thảo luận
Customers changed their inspection method and never told us	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ không	thảo luận
Customers changed their inspection method and never told us	→	Batch traceability ends at the door	✗ không	thảo luận
Temperature in the shop swings fifteen degrees between morning and afternoon	→	Batch traceability ends at the door	✗ không	thảo luận
Temperature in the shop swings fifteen degrees between morning and afternoon	→	Coolant is changed when it smells, not on a schedule	✗ không	thảo luận
Batch traceability ends at the door	→	The oldest machine makes the tightest-tolerance part	✗ không	thảo luận
Coolant is changed when it smells, not on a schedule	→	Rework is not counted anywhere	✗ không	thảo luận
The oldest machine makes the tightest-tolerance part	→	The same operator runs the same machine for years and nobody checks the settings	✗ không	thảo luận
Operators are paid on parts per hour	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ không	thảo luận
The same operator runs the same machine for years and nobody checks the settings	→	Customers changed their inspection method and never told us	✗ không	thảo luận
Batch traceability ends at the door	→	Coolant is changed when it smells, not on a schedule	✗ không	thảo luận
Operators are paid on parts per hour	→	Customers changed their inspection method and never told us	✗ không	thảo luận
Batch traceability ends at the door	→	Customers changed their inspection method and never told us	✗ không	thảo luận
Rework is not counted anywhere	→	The drawing on the floor is not the revision the customer ordered	✗ không	thảo luận
Operators are paid on parts per hour	→	The oldest machine makes the tightest-tolerance part	✗ không	thảo luận
Operators are paid on parts per hour	→	The same operator runs the same machine for years and nobody checks the settings	✗ không	thảo luận
The oldest machine makes the tightest-tolerance part	→	Rework is not counted anywhere	✗ không	thảo luận
Temperature in the shop swings fifteen degrees between morning and afternoon	→	The same operator runs the same machine for years and nobody checks the settings	✗ không	thảo luận
Batch traceability ends at the door	→	Operators are paid on parts per hour	✗ không	thảo luận
Temperature in the shop swings fifteen degrees between morning and afternoon	→	Customers changed their inspection method and never told us	✗ không	thảo luận
Coolant is changed when it smells, not on a schedule	→	The drawing on the floor is not the revision the customer ordered	✗ không	thảo luận
Operators are paid on parts per hour	→	Batch traceability ends at the door	✗ không	thảo luận
The oldest machine makes the tightest-tolerance part	→	Operators are paid on parts per hour	✗ không	thảo luận
Quotes are won on price, so cycle times are cut to the bone	→	The drawing on the floor is not the revision the customer ordered	✗ không	thảo luận
The oldest machine makes the tightest-tolerance part	→	The drawing on the floor is not the revision the customer ordered	✗ không	thảo luận
Temperature in the shop swings fifteen degrees between morning and afternoon	→	Rework is not counted anywhere	✗ không	thảo luận
Operators are paid on parts per hour	→	Quotes are won on price, so cycle times are cut to the bone	✗ không	thảo luận
The oldest machine makes the tightest-tolerance part	→	Quotes are won on price, so cycle times are cut to the bone	✗ không	thảo luận
The oldest machine makes the tightest-tolerance part	→	Batch traceability ends at the door	✗ không	thảo luận
Rework is not counted anywhere	→	Operators are paid on parts per hour	✗ không	thảo luận
Coolant is changed when it smells, not on a schedule	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ không	thảo luận
The same operator runs the same machine for years and nobody checks the settings	→	Batch traceability ends at the door	✗ không	thảo luận
Coolant is changed when it smells, not on a schedule	→	The same operator runs the same machine for years and nobody checks the settings	✗ không	thảo luận
Quotes are won on price, so cycle times are cut to the bone	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ không	thảo luận
The same operator runs the same machine for years and nobody checks the settings	→	Rework is not counted anywhere	✗ không	thảo luận
Customers changed their inspection method and never told us	→	The same operator runs the same machine for years and nobody checks the settings	✗ không	thảo luận
Rework is not counted anywhere	→	Coolant is changed when it smells, not on a schedule	✗ không	thảo luận
Rework is not counted anywhere	→	The same operator runs the same machine for years and nobody checks the settings	✗ không	thảo luận
The drawing on the floor is not the revision the customer ordered	→	Operators are paid on parts per hour	✗ không	thảo luận
The same operator runs the same machine for years and nobody checks the settings	→	The oldest machine makes the tightest-tolerance part	✗ không	thảo luận
Operators are paid on parts per hour	→	Coolant is changed when it smells, not on a schedule	✗ không	thảo luận
The same operator runs the same machine for years and nobody checks the settings	→	Coolant is changed when it smells, not on a schedule	✗ không	thảo luận
The oldest machine makes the tightest-tolerance part	→	Customers changed their inspection method and never told us	✗ không	thảo luận
Batch traceability ends at the door	→	The same operator runs the same machine for years and nobody checks the settings	✗ không	thảo luận
The drawing on the floor is not the revision the customer ordered	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ không	thảo luận
Coolant is changed when it smells, not on a schedule	→	Operators are paid on parts per hour	✗ không	thảo luận
Customers changed their inspection method and never told us	→	Quotes are won on price, so cycle times are cut to the bone	✗ không	thảo luận
Temperature in the shop swings fifteen degrees between morning and afternoon	→	The drawing on the floor is not the revision the customer ordered	✗ không	thảo luận
Batch traceability ends at the door	→	Rework is not counted anywhere	✗ không	thảo luận
Batch traceability ends at the door	→	The drawing on the floor is not the revision the customer ordered	✗ không	thảo luận
Quotes are won on price, so cycle times are cut to the bone	→	The same operator runs the same machine for years and nobody checks the settings	✗ không	thảo luận
Deburring is done by whoever is free	→	Setup sheets are in the setter's head, not on paper	✗ không	thảo luận
Deburring is done by whoever is free	→	First-off inspection is skipped when the job is late	✗ không	thảo luận
New jobs are quoted from the last similar job, not from the drawing	→	First-off inspection is skipped when the job is late	✗ không	thảo luận
Deburring is done by whoever is free	→	…	✗ không	thảo luận
First-off inspection is skipped when the job is late	→	…	✗ không	thảo luận
The customer's returns log and ours do not match	→	…	✗ không	thảo luận
Setup sheets are in the setter's head, not on paper	→	Maintenance is done when a machine stops	✗ không	thảo luận
…	→	…	✗ không	thảo luận
Maintenance is done when a machine stops	→	Deburring is done by whoever is free	✗ không	thảo luận
The customer's returns log and ours do not match	→	Maintenance is done when a machine stops	✗ không	thảo luận
Setup sheets are in the setter's head, not on paper	→	…	✗ không	thảo luận
Deburring is done by whoever is free	→	Tool wear is judged by ear	✗ không	thảo luận
…	→	Parts that pass our inspection fail the customer's	✗ không	thảo luận
Tool wear is judged by ear	→	New jobs are quoted from the last similar job, not from the drawing	✗ không	thảo luận
New jobs are quoted from the last similar job, not from the drawing	→	…	✗ không	thảo luận
The customer's returns log and ours do not match	→	First-off inspection is skipped when the job is late	✗ không	thảo luận
…	→	New jobs are quoted from the last similar job, not from the drawing	✗ không	thảo luận
Setup sheets are in the setter's head, not on paper	→	Tool wear is judged by ear	✗ không	thảo luận
The customer's returns log and ours do not match	→	Parts that pass our inspection fail the customer's	✗ không	thảo luận
Parts that pass our inspection fail the customer's	→	Deburring is done by whoever is free	✗ không	thảo luận
Tool wear is judged by ear	→	Maintenance is done when a machine stops	✗ không	thảo luận
…	→	Tool wear is judged by ear	✗ không	thảo luận
First-off inspection is skipped when the job is late	→	Deburring is done by whoever is free	✗ không	thảo luận
…	→	The customer's returns log and ours do not match	✗ không	thảo luận
Tool wear is judged by ear	→	Parts that pass our inspection fail the customer's	✗ không	thảo luận
The customer's returns log and ours do not match	→	Tool wear is judged by ear	✗ không	thảo luận
Tool wear is judged by ear	→	…	✗ không	thảo luận
Maintenance is done when a machine stops	→	Setup sheets are in the setter's head, not on paper	✗ không	thảo luận
First-off inspection is skipped when the job is late	→	Maintenance is done when a machine stops	✗ không	thảo luận
The customer's returns log and ours do not match	→	Deburring is done by whoever is free	✗ không	thảo luận
Parts that pass our inspection fail the customer's	→	Tool wear is judged by ear	✗ không	thảo luận
Parts that pass our inspection fail the customer's	→	Setup sheets are in the setter's head, not on paper	✗ không	thảo luận
The customer's returns log and ours do not match	→	Setup sheets are in the setter's head, not on paper	✗ không	thảo luận
Setup sheets are in the setter's head, not on paper	→	Deburring is done by whoever is free	✗ không	thảo luận
Parts that pass our inspection fail the customer's	→	Maintenance is done when a machine stops	✗ không	thảo luận
First-off inspection is skipped when the job is late	→	Parts that pass our inspection fail the customer's	✗ không	thảo luận
The customer's returns log and ours do not match	→	…	✗ không	thảo luận
Tool wear is judged by ear	→	Setup sheets are in the setter's head, not on paper	✗ không	thảo luận
Maintenance is done when a machine stops	→	First-off inspection is skipped when the job is late	✗ không	thảo luận
…	→	Setup sheets are in the setter's head, not on paper	✗ không	thảo luận
Setup sheets are in the setter's head, not on paper	→	Parts that pass our inspection fail the customer's	✗ không	thảo luận
Deburring is done by whoever is free	→	…	✗ không	thảo luận
…	→	Maintenance is done when a machine stops	✗ không	thảo luận
Maintenance is done when a machine stops	→	Tool wear is judged by ear	✗ không	thảo luận
New jobs are quoted from the last similar job, not from the drawing	→	Deburring is done by whoever is free	✗ không	thảo luận
Tool wear is judged by ear	→	The customer's returns log and ours do not match	✗ không	thảo luận
Deburring is done by whoever is free	→	Maintenance is done when a machine stops	✗ không	thảo luận
New jobs are quoted from the last similar job, not from the drawing	→	Parts that pass our inspection fail the customer's	✗ không	thảo luận
Parts that pass our inspection fail the customer's	→	New jobs are quoted from the last similar job, not from the drawing	✗ không	thảo luận
The customer's returns log and ours do not match	→	New jobs are quoted from the last similar job, not from the drawing	✗ không	thảo luận
…	→	Setup sheets are in the setter's head, not on paper	✗ không	thảo luận
First-off inspection is skipped when the job is late	→	New jobs are quoted from the last similar job, not from the drawing	✗ không	thảo luận
…	→	Maintenance is done when a machine stops	✗ không	thảo luận
Parts that pass our inspection fail the customer's	→	…	✗ không	thảo luận
First-off inspection is skipped when the job is late	→	Setup sheets are in the setter's head, not on paper	✗ không	thảo luận
…	→	…	✗ không	thảo luận
New jobs are quoted from the last similar job, not from the drawing	→	Setup sheets are in the setter's head, not on paper	✗ không	thảo luận
New jobs are quoted from the last similar job, not from the drawing	→	Tool wear is judged by ear	✗ không	thảo luận
Maintenance is done when a machine stops	→	Parts that pass our inspection fail the customer's	✗ không	thảo luận
First-off inspection is skipped when the job is late	→	The customer's returns log and ours do not match	✗ không	thảo luận
Maintenance is done when a machine stops	→	New jobs are quoted from the last similar job, not from the drawing	✗ không	thảo luận
Maintenance is done when a machine stops	→	…	✗ không	thảo luận
First-off inspection is skipped when the job is late	→	Tool wear is judged by ear	✗ không	thảo luận
New jobs are quoted from the last similar job, not from the drawing	→	…	✗ không	thảo luận
…	→	Tool wear is judged by ear	✗ không	thảo luận
Deburring is done by whoever is free	→	New jobs are quoted from the last similar job, not from the drawing	✗ không	thảo luận
Parts that pass our inspection fail the customer's	→	First-off inspection is skipped when the job is late	✗ không	thảo luận
…	→	First-off inspection is skipped when the job is late	✗ không	thảo luận
…	→	First-off inspection is skipped when the job is late	✗ không	thảo luận
…	→	Parts that pass our inspection fail the customer's	✗ không	thảo luận
Setup sheets are in the setter's head, not on paper	→	First-off inspection is skipped when the job is late	✗ không	thảo luận
First-off inspection is skipped when the job is late	→	…	✗ không	thảo luận
Tool wear is judged by ear	→	…	✗ không	thảo luận
New jobs are quoted from the last similar job, not from the drawing	→	The customer's returns log and ours do not match	✗ không	thảo luận
Tool wear is judged by ear	→	First-off inspection is skipped when the job is late	✗ không	thảo luận
…	→	The customer's returns log and ours do not match	✗ không	thảo luận
…	→	Deburring is done by whoever is free	✗ không	thảo luận
Setup sheets are in the setter's head, not on paper	→	…	✗ không	thảo luận
…	→	New jobs are quoted from the last similar job, not from the drawing	✗ không	thảo luận
Setup sheets are in the setter's head, not on paper	→	The customer's returns log and ours do not match	✗ không	thảo luận
New jobs are quoted from the last similar job, not from the drawing	→	Maintenance is done when a machine stops	✗ không	thảo luận
Maintenance is done when a machine stops	→	…	✗ không	thảo luận
Parts that pass our inspection fail the customer's	→	…	✗ không	thảo luận