Strukturering · Why do parts that passed inspection come back?

FRÅGAN

Why do parts that passed inspection come back?

Har det ena betydande inverkan på det andra? Tre fjärdedelar av de avgivna rösterna avgör.

Du tittar som gäst. Ange ett användarnamn för att gå med och delta.

Frågorna fördelas mellan grupperna, så du får dem som din grupp tilldelades — inte alla 180.

varför

Ingen skulle kunna svara på flera hundra par. Varje par går till en grupp; ett par som blir delat skickas sedan vidare till andra grupper, så det kan dyka upp i din lista senare trots att det började någon annanstans. Antalet avgjorda omfattar varje grupps arbete, och därför stiger det snabbare än din egen lista krymper.

176 / 180 avgjorda 0 för dig att besvara

Senaste sammanräkning: avgjorda 176 · skickade vidare till paneler över grupperna 1 · omstridda 0 · under kvorum 3 — paneler behöver minst max(2, 75 % av panelen) avgivna röster; din minsta panel har 15 medlemmar.

stäng ✕

First-off inspection is skipped when the job is late → påverkar? → Maintenance is done when a machine stops

Inget sagt än.

Avslutad fas — protokollet över par och röster står ovan.Kontrollera logiken ↗

Batch traceability ends at the door	→	Temperature in the shop swings fifteen degrees between morning and afternoon	öppen	diskutera
…	→	Deburring is done by whoever is free	öppen vidareskickat	diskutera
Setup sheets are in the setter's head, not on paper	→	New jobs are quoted from the last similar job, not from the drawing	öppen	diskutera
Maintenance is done when a machine stops	→	The customer's returns log and ours do not match	öppen	diskutera
Rework is not counted anywhere	→	Quotes are won on price, so cycle times are cut to the bone	✓ ja	diskutera
Customers changed their inspection method and never told us	→	Operators are paid on parts per hour	✓ ja	diskutera
Customers changed their inspection method and never told us	→	Coolant is changed when it smells, not on a schedule	✓ ja	diskutera
Quotes are won on price, so cycle times are cut to the bone	→	The oldest machine makes the tightest-tolerance part	✓ ja	diskutera
Quotes are won on price, so cycle times are cut to the bone	→	Operators are paid on parts per hour	✓ ja	diskutera
The same operator runs the same machine for years and nobody checks the settings	→	The drawing on the floor is not the revision the customer ordered	✓ ja	diskutera
Tool wear is judged by ear	→	Deburring is done by whoever is free	✓ ja	diskutera
Deburring is done by whoever is free	→	Parts that pass our inspection fail the customer's	✓ ja	diskutera
Parts that pass our inspection fail the customer's	→	The customer's returns log and ours do not match	✓ ja	diskutera
Deburring is done by whoever is free	→	The customer's returns log and ours do not match	✓ härledd	diskutera
Quotes are won on price, so cycle times are cut to the bone	→	Coolant is changed when it smells, not on a schedule	✗ nej	diskutera
Temperature in the shop swings fifteen degrees between morning and afternoon	→	Quotes are won on price, so cycle times are cut to the bone	✗ nej	diskutera
Coolant is changed when it smells, not on a schedule	→	Quotes are won on price, so cycle times are cut to the bone	✗ nej	diskutera
The same operator runs the same machine for years and nobody checks the settings	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ nej	diskutera
Rework is not counted anywhere	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ nej	diskutera
Rework is not counted anywhere	→	Customers changed their inspection method and never told us	✗ nej	diskutera
The drawing on the floor is not the revision the customer ordered	→	The same operator runs the same machine for years and nobody checks the settings	✗ nej	diskutera
The drawing on the floor is not the revision the customer ordered	→	The oldest machine makes the tightest-tolerance part	✗ nej	diskutera
The drawing on the floor is not the revision the customer ordered	→	Coolant is changed when it smells, not on a schedule	✗ nej	diskutera
The drawing on the floor is not the revision the customer ordered	→	Batch traceability ends at the door	✗ nej	diskutera
Customers changed their inspection method and never told us	→	The oldest machine makes the tightest-tolerance part	✗ nej	diskutera
Coolant is changed when it smells, not on a schedule	→	Customers changed their inspection method and never told us	✗ nej	diskutera
The same operator runs the same machine for years and nobody checks the settings	→	Quotes are won on price, so cycle times are cut to the bone	✗ nej	diskutera
Rework is not counted anywhere	→	The oldest machine makes the tightest-tolerance part	✗ nej	diskutera
Temperature in the shop swings fifteen degrees between morning and afternoon	→	Operators are paid on parts per hour	✗ nej	diskutera
The same operator runs the same machine for years and nobody checks the settings	→	Operators are paid on parts per hour	✗ nej	diskutera
Batch traceability ends at the door	→	Quotes are won on price, so cycle times are cut to the bone	✗ nej	diskutera
The drawing on the floor is not the revision the customer ordered	→	Customers changed their inspection method and never told us	✗ nej	diskutera
Quotes are won on price, so cycle times are cut to the bone	→	Customers changed their inspection method and never told us	✗ nej	diskutera
Temperature in the shop swings fifteen degrees between morning and afternoon	→	The oldest machine makes the tightest-tolerance part	✗ nej	diskutera
Rework is not counted anywhere	→	Batch traceability ends at the door	✗ nej	diskutera
The oldest machine makes the tightest-tolerance part	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ nej	diskutera
Coolant is changed when it smells, not on a schedule	→	The oldest machine makes the tightest-tolerance part	✗ nej	diskutera
Operators are paid on parts per hour	→	The drawing on the floor is not the revision the customer ordered	✗ nej	diskutera
The drawing on the floor is not the revision the customer ordered	→	Quotes are won on price, so cycle times are cut to the bone	✗ nej	diskutera
Customers changed their inspection method and never told us	→	The drawing on the floor is not the revision the customer ordered	✗ nej	diskutera
Quotes are won on price, so cycle times are cut to the bone	→	Rework is not counted anywhere	✗ nej	diskutera
Customers changed their inspection method and never told us	→	Rework is not counted anywhere	✗ nej	diskutera
Quotes are won on price, so cycle times are cut to the bone	→	Batch traceability ends at the door	✗ nej	diskutera
The drawing on the floor is not the revision the customer ordered	→	Rework is not counted anywhere	✗ nej	diskutera
Operators are paid on parts per hour	→	Rework is not counted anywhere	✗ nej	diskutera
The oldest machine makes the tightest-tolerance part	→	Coolant is changed when it smells, not on a schedule	✗ nej	diskutera
Coolant is changed when it smells, not on a schedule	→	Batch traceability ends at the door	✗ nej	diskutera
Customers changed their inspection method and never told us	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ nej	diskutera
Customers changed their inspection method and never told us	→	Batch traceability ends at the door	✗ nej	diskutera
Temperature in the shop swings fifteen degrees between morning and afternoon	→	Batch traceability ends at the door	✗ nej	diskutera
Temperature in the shop swings fifteen degrees between morning and afternoon	→	Coolant is changed when it smells, not on a schedule	✗ nej	diskutera
Batch traceability ends at the door	→	The oldest machine makes the tightest-tolerance part	✗ nej	diskutera
Coolant is changed when it smells, not on a schedule	→	Rework is not counted anywhere	✗ nej	diskutera
The oldest machine makes the tightest-tolerance part	→	The same operator runs the same machine for years and nobody checks the settings	✗ nej	diskutera
Operators are paid on parts per hour	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ nej	diskutera
The same operator runs the same machine for years and nobody checks the settings	→	Customers changed their inspection method and never told us	✗ nej	diskutera
Batch traceability ends at the door	→	Coolant is changed when it smells, not on a schedule	✗ nej	diskutera
Operators are paid on parts per hour	→	Customers changed their inspection method and never told us	✗ nej	diskutera
Batch traceability ends at the door	→	Customers changed their inspection method and never told us	✗ nej	diskutera
Rework is not counted anywhere	→	The drawing on the floor is not the revision the customer ordered	✗ nej	diskutera
Operators are paid on parts per hour	→	The oldest machine makes the tightest-tolerance part	✗ nej	diskutera
Operators are paid on parts per hour	→	The same operator runs the same machine for years and nobody checks the settings	✗ nej	diskutera
The oldest machine makes the tightest-tolerance part	→	Rework is not counted anywhere	✗ nej	diskutera
Temperature in the shop swings fifteen degrees between morning and afternoon	→	The same operator runs the same machine for years and nobody checks the settings	✗ nej	diskutera
Batch traceability ends at the door	→	Operators are paid on parts per hour	✗ nej	diskutera
Temperature in the shop swings fifteen degrees between morning and afternoon	→	Customers changed their inspection method and never told us	✗ nej	diskutera
Coolant is changed when it smells, not on a schedule	→	The drawing on the floor is not the revision the customer ordered	✗ nej	diskutera
Operators are paid on parts per hour	→	Batch traceability ends at the door	✗ nej	diskutera
The oldest machine makes the tightest-tolerance part	→	Operators are paid on parts per hour	✗ nej	diskutera
Quotes are won on price, so cycle times are cut to the bone	→	The drawing on the floor is not the revision the customer ordered	✗ nej	diskutera
The oldest machine makes the tightest-tolerance part	→	The drawing on the floor is not the revision the customer ordered	✗ nej	diskutera
Temperature in the shop swings fifteen degrees between morning and afternoon	→	Rework is not counted anywhere	✗ nej	diskutera
Operators are paid on parts per hour	→	Quotes are won on price, so cycle times are cut to the bone	✗ nej	diskutera
The oldest machine makes the tightest-tolerance part	→	Quotes are won on price, so cycle times are cut to the bone	✗ nej	diskutera
The oldest machine makes the tightest-tolerance part	→	Batch traceability ends at the door	✗ nej	diskutera
Rework is not counted anywhere	→	Operators are paid on parts per hour	✗ nej	diskutera
Coolant is changed when it smells, not on a schedule	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ nej	diskutera
The same operator runs the same machine for years and nobody checks the settings	→	Batch traceability ends at the door	✗ nej	diskutera
Coolant is changed when it smells, not on a schedule	→	The same operator runs the same machine for years and nobody checks the settings	✗ nej	diskutera
Quotes are won on price, so cycle times are cut to the bone	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ nej	diskutera
The same operator runs the same machine for years and nobody checks the settings	→	Rework is not counted anywhere	✗ nej	diskutera
Customers changed their inspection method and never told us	→	The same operator runs the same machine for years and nobody checks the settings	✗ nej	diskutera
Rework is not counted anywhere	→	Coolant is changed when it smells, not on a schedule	✗ nej	diskutera
Rework is not counted anywhere	→	The same operator runs the same machine for years and nobody checks the settings	✗ nej	diskutera
The drawing on the floor is not the revision the customer ordered	→	Operators are paid on parts per hour	✗ nej	diskutera
The same operator runs the same machine for years and nobody checks the settings	→	The oldest machine makes the tightest-tolerance part	✗ nej	diskutera
Operators are paid on parts per hour	→	Coolant is changed when it smells, not on a schedule	✗ nej	diskutera
The same operator runs the same machine for years and nobody checks the settings	→	Coolant is changed when it smells, not on a schedule	✗ nej	diskutera
The oldest machine makes the tightest-tolerance part	→	Customers changed their inspection method and never told us	✗ nej	diskutera
Batch traceability ends at the door	→	The same operator runs the same machine for years and nobody checks the settings	✗ nej	diskutera
The drawing on the floor is not the revision the customer ordered	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ nej	diskutera
Coolant is changed when it smells, not on a schedule	→	Operators are paid on parts per hour	✗ nej	diskutera
Customers changed their inspection method and never told us	→	Quotes are won on price, so cycle times are cut to the bone	✗ nej	diskutera
Temperature in the shop swings fifteen degrees between morning and afternoon	→	The drawing on the floor is not the revision the customer ordered	✗ nej	diskutera
Batch traceability ends at the door	→	Rework is not counted anywhere	✗ nej	diskutera
Batch traceability ends at the door	→	The drawing on the floor is not the revision the customer ordered	✗ nej	diskutera
Quotes are won on price, so cycle times are cut to the bone	→	The same operator runs the same machine for years and nobody checks the settings	✗ nej	diskutera
Deburring is done by whoever is free	→	Setup sheets are in the setter's head, not on paper	✗ nej	diskutera
Deburring is done by whoever is free	→	First-off inspection is skipped when the job is late	✗ nej	diskutera
New jobs are quoted from the last similar job, not from the drawing	→	First-off inspection is skipped when the job is late	✗ nej	diskutera
Deburring is done by whoever is free	→	…	✗ nej	diskutera
First-off inspection is skipped when the job is late	→	…	✗ nej	diskutera
The customer's returns log and ours do not match	→	…	✗ nej	diskutera
Setup sheets are in the setter's head, not on paper	→	Maintenance is done when a machine stops	✗ nej	diskutera
…	→	…	✗ nej	diskutera
Maintenance is done when a machine stops	→	Deburring is done by whoever is free	✗ nej	diskutera
The customer's returns log and ours do not match	→	Maintenance is done when a machine stops	✗ nej	diskutera
Setup sheets are in the setter's head, not on paper	→	…	✗ nej	diskutera
Deburring is done by whoever is free	→	Tool wear is judged by ear	✗ nej	diskutera
…	→	Parts that pass our inspection fail the customer's	✗ nej	diskutera
Tool wear is judged by ear	→	New jobs are quoted from the last similar job, not from the drawing	✗ nej	diskutera
New jobs are quoted from the last similar job, not from the drawing	→	…	✗ nej	diskutera
The customer's returns log and ours do not match	→	First-off inspection is skipped when the job is late	✗ nej	diskutera
…	→	New jobs are quoted from the last similar job, not from the drawing	✗ nej	diskutera
Setup sheets are in the setter's head, not on paper	→	Tool wear is judged by ear	✗ nej	diskutera
The customer's returns log and ours do not match	→	Parts that pass our inspection fail the customer's	✗ nej	diskutera
Parts that pass our inspection fail the customer's	→	Deburring is done by whoever is free	✗ nej	diskutera
Tool wear is judged by ear	→	Maintenance is done when a machine stops	✗ nej	diskutera
…	→	Tool wear is judged by ear	✗ nej	diskutera
First-off inspection is skipped when the job is late	→	Deburring is done by whoever is free	✗ nej	diskutera
…	→	The customer's returns log and ours do not match	✗ nej	diskutera
Tool wear is judged by ear	→	Parts that pass our inspection fail the customer's	✗ nej	diskutera
The customer's returns log and ours do not match	→	Tool wear is judged by ear	✗ nej	diskutera
Tool wear is judged by ear	→	…	✗ nej	diskutera
Maintenance is done when a machine stops	→	Setup sheets are in the setter's head, not on paper	✗ nej	diskutera
First-off inspection is skipped when the job is late	→	Maintenance is done when a machine stops	✗ nej	i fokus ↑ · stäng ✕
The customer's returns log and ours do not match	→	Deburring is done by whoever is free	✗ nej	diskutera
Parts that pass our inspection fail the customer's	→	Tool wear is judged by ear	✗ nej	diskutera
Parts that pass our inspection fail the customer's	→	Setup sheets are in the setter's head, not on paper	✗ nej	diskutera
The customer's returns log and ours do not match	→	Setup sheets are in the setter's head, not on paper	✗ nej	diskutera
Setup sheets are in the setter's head, not on paper	→	Deburring is done by whoever is free	✗ nej	diskutera
Parts that pass our inspection fail the customer's	→	Maintenance is done when a machine stops	✗ nej	diskutera
First-off inspection is skipped when the job is late	→	Parts that pass our inspection fail the customer's	✗ nej	diskutera
The customer's returns log and ours do not match	→	…	✗ nej	diskutera
Tool wear is judged by ear	→	Setup sheets are in the setter's head, not on paper	✗ nej	diskutera
Maintenance is done when a machine stops	→	First-off inspection is skipped when the job is late	✗ nej	diskutera
…	→	Setup sheets are in the setter's head, not on paper	✗ nej	diskutera
Setup sheets are in the setter's head, not on paper	→	Parts that pass our inspection fail the customer's	✗ nej	diskutera
Deburring is done by whoever is free	→	…	✗ nej	diskutera
…	→	Maintenance is done when a machine stops	✗ nej	diskutera
Maintenance is done when a machine stops	→	Tool wear is judged by ear	✗ nej	diskutera
New jobs are quoted from the last similar job, not from the drawing	→	Deburring is done by whoever is free	✗ nej	diskutera
Tool wear is judged by ear	→	The customer's returns log and ours do not match	✗ nej	diskutera
Deburring is done by whoever is free	→	Maintenance is done when a machine stops	✗ nej	diskutera
New jobs are quoted from the last similar job, not from the drawing	→	Parts that pass our inspection fail the customer's	✗ nej	diskutera
Parts that pass our inspection fail the customer's	→	New jobs are quoted from the last similar job, not from the drawing	✗ nej	diskutera
The customer's returns log and ours do not match	→	New jobs are quoted from the last similar job, not from the drawing	✗ nej	diskutera
…	→	Setup sheets are in the setter's head, not on paper	✗ nej	diskutera
First-off inspection is skipped when the job is late	→	New jobs are quoted from the last similar job, not from the drawing	✗ nej	diskutera
…	→	Maintenance is done when a machine stops	✗ nej	diskutera
Parts that pass our inspection fail the customer's	→	…	✗ nej	diskutera
First-off inspection is skipped when the job is late	→	Setup sheets are in the setter's head, not on paper	✗ nej	diskutera
…	→	…	✗ nej	diskutera
New jobs are quoted from the last similar job, not from the drawing	→	Setup sheets are in the setter's head, not on paper	✗ nej	diskutera
New jobs are quoted from the last similar job, not from the drawing	→	Tool wear is judged by ear	✗ nej	diskutera
Maintenance is done when a machine stops	→	Parts that pass our inspection fail the customer's	✗ nej	diskutera
First-off inspection is skipped when the job is late	→	The customer's returns log and ours do not match	✗ nej	diskutera
Maintenance is done when a machine stops	→	New jobs are quoted from the last similar job, not from the drawing	✗ nej	diskutera
Maintenance is done when a machine stops	→	…	✗ nej	diskutera
First-off inspection is skipped when the job is late	→	Tool wear is judged by ear	✗ nej	diskutera
New jobs are quoted from the last similar job, not from the drawing	→	…	✗ nej	diskutera
…	→	Tool wear is judged by ear	✗ nej	diskutera
Deburring is done by whoever is free	→	New jobs are quoted from the last similar job, not from the drawing	✗ nej	diskutera
Parts that pass our inspection fail the customer's	→	First-off inspection is skipped when the job is late	✗ nej	diskutera
…	→	First-off inspection is skipped when the job is late	✗ nej	diskutera
…	→	First-off inspection is skipped when the job is late	✗ nej	diskutera
…	→	Parts that pass our inspection fail the customer's	✗ nej	diskutera
Setup sheets are in the setter's head, not on paper	→	First-off inspection is skipped when the job is late	✗ nej	diskutera
First-off inspection is skipped when the job is late	→	…	✗ nej	diskutera
Tool wear is judged by ear	→	…	✗ nej	diskutera
New jobs are quoted from the last similar job, not from the drawing	→	The customer's returns log and ours do not match	✗ nej	diskutera
Tool wear is judged by ear	→	First-off inspection is skipped when the job is late	✗ nej	diskutera
…	→	The customer's returns log and ours do not match	✗ nej	diskutera
…	→	Deburring is done by whoever is free	✗ nej	diskutera
Setup sheets are in the setter's head, not on paper	→	…	✗ nej	diskutera
…	→	New jobs are quoted from the last similar job, not from the drawing	✗ nej	diskutera
Setup sheets are in the setter's head, not on paper	→	The customer's returns log and ours do not match	✗ nej	diskutera
New jobs are quoted from the last similar job, not from the drawing	→	Maintenance is done when a machine stops	✗ nej	diskutera
Maintenance is done when a machine stops	→	…	✗ nej	diskutera
Parts that pass our inspection fail the customer's	→	…	✗ nej	diskutera