Strukturering · Why do parts that passed inspection come back?

SPØRGSMÅLET

Why do parts that passed inspection come back?

Har den ene væsentlig indflydelse på den anden? Tre fjerdedele af de afgivne stemmer afgør det.

Du ser med som gæst. Vælg et brugernavn for at komme med og deltage.

Spørgsmålene fordeles mellem grupperne, så du får dem, din gruppe fik tildelt — ikke alle 180.

hvorfor

Ingen kunne svare på flere hundrede par. Hvert par går til én gruppe; et par, der deler gruppen, sendes derefter videre til andre grupper, så det kan dukke op på din liste senere, selvom det startede et andet sted. Antallet af afgjorte tæller alle gruppers arbejde, og derfor stiger det hurtigere, end din egen liste skrumper.

176 / 180 afgjort 0 til dig at besvare

Seneste optælling: afgjort: 176 · sendt videre til tværgående paneler: 1 · omstridt: 0 · under kvorum: 3 — paneler skal have mindst max(2, 75 % af panelet) afgivne stemmer; dit mindste panel har 15 medlemmer.

luk ✕

First-off inspection is skipped when the job is late → påvirker? → …

Intet sagt endnu.

Afsluttet fase — historikken over par og stemmer står ovenfor.Tjek logikken ↗

Batch traceability ends at the door	→	Temperature in the shop swings fifteen degrees between morning and afternoon	åben	diskutér
…	→	Deburring is done by whoever is free	åben sendt videre	diskutér
Setup sheets are in the setter's head, not on paper	→	New jobs are quoted from the last similar job, not from the drawing	åben	diskutér
Maintenance is done when a machine stops	→	The customer's returns log and ours do not match	åben	diskutér
Rework is not counted anywhere	→	Quotes are won on price, so cycle times are cut to the bone	✓ ja	diskutér
Customers changed their inspection method and never told us	→	Operators are paid on parts per hour	✓ ja	diskutér
Customers changed their inspection method and never told us	→	Coolant is changed when it smells, not on a schedule	✓ ja	diskutér
Quotes are won on price, so cycle times are cut to the bone	→	The oldest machine makes the tightest-tolerance part	✓ ja	diskutér
Quotes are won on price, so cycle times are cut to the bone	→	Operators are paid on parts per hour	✓ ja	diskutér
The same operator runs the same machine for years and nobody checks the settings	→	The drawing on the floor is not the revision the customer ordered	✓ ja	diskutér
Tool wear is judged by ear	→	Deburring is done by whoever is free	✓ ja	diskutér
Deburring is done by whoever is free	→	Parts that pass our inspection fail the customer's	✓ ja	diskutér
Parts that pass our inspection fail the customer's	→	The customer's returns log and ours do not match	✓ ja	diskutér
Deburring is done by whoever is free	→	The customer's returns log and ours do not match	✓ udledt	diskutér
Quotes are won on price, so cycle times are cut to the bone	→	Coolant is changed when it smells, not on a schedule	✗ nej	diskutér
Temperature in the shop swings fifteen degrees between morning and afternoon	→	Quotes are won on price, so cycle times are cut to the bone	✗ nej	diskutér
Coolant is changed when it smells, not on a schedule	→	Quotes are won on price, so cycle times are cut to the bone	✗ nej	diskutér
The same operator runs the same machine for years and nobody checks the settings	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ nej	diskutér
Rework is not counted anywhere	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ nej	diskutér
Rework is not counted anywhere	→	Customers changed their inspection method and never told us	✗ nej	diskutér
The drawing on the floor is not the revision the customer ordered	→	The same operator runs the same machine for years and nobody checks the settings	✗ nej	diskutér
The drawing on the floor is not the revision the customer ordered	→	The oldest machine makes the tightest-tolerance part	✗ nej	diskutér
The drawing on the floor is not the revision the customer ordered	→	Coolant is changed when it smells, not on a schedule	✗ nej	diskutér
The drawing on the floor is not the revision the customer ordered	→	Batch traceability ends at the door	✗ nej	diskutér
Customers changed their inspection method and never told us	→	The oldest machine makes the tightest-tolerance part	✗ nej	diskutér
Coolant is changed when it smells, not on a schedule	→	Customers changed their inspection method and never told us	✗ nej	diskutér
The same operator runs the same machine for years and nobody checks the settings	→	Quotes are won on price, so cycle times are cut to the bone	✗ nej	diskutér
Rework is not counted anywhere	→	The oldest machine makes the tightest-tolerance part	✗ nej	diskutér
Temperature in the shop swings fifteen degrees between morning and afternoon	→	Operators are paid on parts per hour	✗ nej	diskutér
The same operator runs the same machine for years and nobody checks the settings	→	Operators are paid on parts per hour	✗ nej	diskutér
Batch traceability ends at the door	→	Quotes are won on price, so cycle times are cut to the bone	✗ nej	diskutér
The drawing on the floor is not the revision the customer ordered	→	Customers changed their inspection method and never told us	✗ nej	diskutér
Quotes are won on price, so cycle times are cut to the bone	→	Customers changed their inspection method and never told us	✗ nej	diskutér
Temperature in the shop swings fifteen degrees between morning and afternoon	→	The oldest machine makes the tightest-tolerance part	✗ nej	diskutér
Rework is not counted anywhere	→	Batch traceability ends at the door	✗ nej	diskutér
The oldest machine makes the tightest-tolerance part	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ nej	diskutér
Coolant is changed when it smells, not on a schedule	→	The oldest machine makes the tightest-tolerance part	✗ nej	diskutér
Operators are paid on parts per hour	→	The drawing on the floor is not the revision the customer ordered	✗ nej	diskutér
The drawing on the floor is not the revision the customer ordered	→	Quotes are won on price, so cycle times are cut to the bone	✗ nej	diskutér
Customers changed their inspection method and never told us	→	The drawing on the floor is not the revision the customer ordered	✗ nej	diskutér
Quotes are won on price, so cycle times are cut to the bone	→	Rework is not counted anywhere	✗ nej	diskutér
Customers changed their inspection method and never told us	→	Rework is not counted anywhere	✗ nej	diskutér
Quotes are won on price, so cycle times are cut to the bone	→	Batch traceability ends at the door	✗ nej	diskutér
The drawing on the floor is not the revision the customer ordered	→	Rework is not counted anywhere	✗ nej	diskutér
Operators are paid on parts per hour	→	Rework is not counted anywhere	✗ nej	diskutér
The oldest machine makes the tightest-tolerance part	→	Coolant is changed when it smells, not on a schedule	✗ nej	diskutér
Coolant is changed when it smells, not on a schedule	→	Batch traceability ends at the door	✗ nej	diskutér
Customers changed their inspection method and never told us	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ nej	diskutér
Customers changed their inspection method and never told us	→	Batch traceability ends at the door	✗ nej	diskutér
Temperature in the shop swings fifteen degrees between morning and afternoon	→	Batch traceability ends at the door	✗ nej	diskutér
Temperature in the shop swings fifteen degrees between morning and afternoon	→	Coolant is changed when it smells, not on a schedule	✗ nej	diskutér
Batch traceability ends at the door	→	The oldest machine makes the tightest-tolerance part	✗ nej	diskutér
Coolant is changed when it smells, not on a schedule	→	Rework is not counted anywhere	✗ nej	diskutér
The oldest machine makes the tightest-tolerance part	→	The same operator runs the same machine for years and nobody checks the settings	✗ nej	diskutér
Operators are paid on parts per hour	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ nej	diskutér
The same operator runs the same machine for years and nobody checks the settings	→	Customers changed their inspection method and never told us	✗ nej	diskutér
Batch traceability ends at the door	→	Coolant is changed when it smells, not on a schedule	✗ nej	diskutér
Operators are paid on parts per hour	→	Customers changed their inspection method and never told us	✗ nej	diskutér
Batch traceability ends at the door	→	Customers changed their inspection method and never told us	✗ nej	diskutér
Rework is not counted anywhere	→	The drawing on the floor is not the revision the customer ordered	✗ nej	diskutér
Operators are paid on parts per hour	→	The oldest machine makes the tightest-tolerance part	✗ nej	diskutér
Operators are paid on parts per hour	→	The same operator runs the same machine for years and nobody checks the settings	✗ nej	diskutér
The oldest machine makes the tightest-tolerance part	→	Rework is not counted anywhere	✗ nej	diskutér
Temperature in the shop swings fifteen degrees between morning and afternoon	→	The same operator runs the same machine for years and nobody checks the settings	✗ nej	diskutér
Batch traceability ends at the door	→	Operators are paid on parts per hour	✗ nej	diskutér
Temperature in the shop swings fifteen degrees between morning and afternoon	→	Customers changed their inspection method and never told us	✗ nej	diskutér
Coolant is changed when it smells, not on a schedule	→	The drawing on the floor is not the revision the customer ordered	✗ nej	diskutér
Operators are paid on parts per hour	→	Batch traceability ends at the door	✗ nej	diskutér
The oldest machine makes the tightest-tolerance part	→	Operators are paid on parts per hour	✗ nej	diskutér
Quotes are won on price, so cycle times are cut to the bone	→	The drawing on the floor is not the revision the customer ordered	✗ nej	diskutér
The oldest machine makes the tightest-tolerance part	→	The drawing on the floor is not the revision the customer ordered	✗ nej	diskutér
Temperature in the shop swings fifteen degrees between morning and afternoon	→	Rework is not counted anywhere	✗ nej	diskutér
Operators are paid on parts per hour	→	Quotes are won on price, so cycle times are cut to the bone	✗ nej	diskutér
The oldest machine makes the tightest-tolerance part	→	Quotes are won on price, so cycle times are cut to the bone	✗ nej	diskutér
The oldest machine makes the tightest-tolerance part	→	Batch traceability ends at the door	✗ nej	diskutér
Rework is not counted anywhere	→	Operators are paid on parts per hour	✗ nej	diskutér
Coolant is changed when it smells, not on a schedule	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ nej	diskutér
The same operator runs the same machine for years and nobody checks the settings	→	Batch traceability ends at the door	✗ nej	diskutér
Coolant is changed when it smells, not on a schedule	→	The same operator runs the same machine for years and nobody checks the settings	✗ nej	diskutér
Quotes are won on price, so cycle times are cut to the bone	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ nej	diskutér
The same operator runs the same machine for years and nobody checks the settings	→	Rework is not counted anywhere	✗ nej	diskutér
Customers changed their inspection method and never told us	→	The same operator runs the same machine for years and nobody checks the settings	✗ nej	diskutér
Rework is not counted anywhere	→	Coolant is changed when it smells, not on a schedule	✗ nej	diskutér
Rework is not counted anywhere	→	The same operator runs the same machine for years and nobody checks the settings	✗ nej	diskutér
The drawing on the floor is not the revision the customer ordered	→	Operators are paid on parts per hour	✗ nej	diskutér
The same operator runs the same machine for years and nobody checks the settings	→	The oldest machine makes the tightest-tolerance part	✗ nej	diskutér
Operators are paid on parts per hour	→	Coolant is changed when it smells, not on a schedule	✗ nej	diskutér
The same operator runs the same machine for years and nobody checks the settings	→	Coolant is changed when it smells, not on a schedule	✗ nej	diskutér
The oldest machine makes the tightest-tolerance part	→	Customers changed their inspection method and never told us	✗ nej	diskutér
Batch traceability ends at the door	→	The same operator runs the same machine for years and nobody checks the settings	✗ nej	diskutér
The drawing on the floor is not the revision the customer ordered	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ nej	diskutér
Coolant is changed when it smells, not on a schedule	→	Operators are paid on parts per hour	✗ nej	diskutér
Customers changed their inspection method and never told us	→	Quotes are won on price, so cycle times are cut to the bone	✗ nej	diskutér
Temperature in the shop swings fifteen degrees between morning and afternoon	→	The drawing on the floor is not the revision the customer ordered	✗ nej	diskutér
Batch traceability ends at the door	→	Rework is not counted anywhere	✗ nej	diskutér
Batch traceability ends at the door	→	The drawing on the floor is not the revision the customer ordered	✗ nej	diskutér
Quotes are won on price, so cycle times are cut to the bone	→	The same operator runs the same machine for years and nobody checks the settings	✗ nej	diskutér
Deburring is done by whoever is free	→	Setup sheets are in the setter's head, not on paper	✗ nej	diskutér
Deburring is done by whoever is free	→	First-off inspection is skipped when the job is late	✗ nej	diskutér
New jobs are quoted from the last similar job, not from the drawing	→	First-off inspection is skipped when the job is late	✗ nej	diskutér
Deburring is done by whoever is free	→	…	✗ nej	diskutér
First-off inspection is skipped when the job is late	→	…	✗ nej	i fokus ↑ · luk ✕
The customer's returns log and ours do not match	→	…	✗ nej	diskutér
Setup sheets are in the setter's head, not on paper	→	Maintenance is done when a machine stops	✗ nej	diskutér
…	→	…	✗ nej	diskutér
Maintenance is done when a machine stops	→	Deburring is done by whoever is free	✗ nej	diskutér
The customer's returns log and ours do not match	→	Maintenance is done when a machine stops	✗ nej	diskutér
Setup sheets are in the setter's head, not on paper	→	…	✗ nej	diskutér
Deburring is done by whoever is free	→	Tool wear is judged by ear	✗ nej	diskutér
…	→	Parts that pass our inspection fail the customer's	✗ nej	diskutér
Tool wear is judged by ear	→	New jobs are quoted from the last similar job, not from the drawing	✗ nej	diskutér
New jobs are quoted from the last similar job, not from the drawing	→	…	✗ nej	diskutér
The customer's returns log and ours do not match	→	First-off inspection is skipped when the job is late	✗ nej	diskutér
…	→	New jobs are quoted from the last similar job, not from the drawing	✗ nej	diskutér
Setup sheets are in the setter's head, not on paper	→	Tool wear is judged by ear	✗ nej	diskutér
The customer's returns log and ours do not match	→	Parts that pass our inspection fail the customer's	✗ nej	diskutér
Parts that pass our inspection fail the customer's	→	Deburring is done by whoever is free	✗ nej	diskutér
Tool wear is judged by ear	→	Maintenance is done when a machine stops	✗ nej	diskutér
…	→	Tool wear is judged by ear	✗ nej	diskutér
First-off inspection is skipped when the job is late	→	Deburring is done by whoever is free	✗ nej	diskutér
…	→	The customer's returns log and ours do not match	✗ nej	diskutér
Tool wear is judged by ear	→	Parts that pass our inspection fail the customer's	✗ nej	diskutér
The customer's returns log and ours do not match	→	Tool wear is judged by ear	✗ nej	diskutér
Tool wear is judged by ear	→	…	✗ nej	diskutér
Maintenance is done when a machine stops	→	Setup sheets are in the setter's head, not on paper	✗ nej	diskutér
First-off inspection is skipped when the job is late	→	Maintenance is done when a machine stops	✗ nej	diskutér
The customer's returns log and ours do not match	→	Deburring is done by whoever is free	✗ nej	diskutér
Parts that pass our inspection fail the customer's	→	Tool wear is judged by ear	✗ nej	diskutér
Parts that pass our inspection fail the customer's	→	Setup sheets are in the setter's head, not on paper	✗ nej	diskutér
The customer's returns log and ours do not match	→	Setup sheets are in the setter's head, not on paper	✗ nej	diskutér
Setup sheets are in the setter's head, not on paper	→	Deburring is done by whoever is free	✗ nej	diskutér
Parts that pass our inspection fail the customer's	→	Maintenance is done when a machine stops	✗ nej	diskutér
First-off inspection is skipped when the job is late	→	Parts that pass our inspection fail the customer's	✗ nej	diskutér
The customer's returns log and ours do not match	→	…	✗ nej	diskutér
Tool wear is judged by ear	→	Setup sheets are in the setter's head, not on paper	✗ nej	diskutér
Maintenance is done when a machine stops	→	First-off inspection is skipped when the job is late	✗ nej	diskutér
…	→	Setup sheets are in the setter's head, not on paper	✗ nej	diskutér
Setup sheets are in the setter's head, not on paper	→	Parts that pass our inspection fail the customer's	✗ nej	diskutér
Deburring is done by whoever is free	→	…	✗ nej	diskutér
…	→	Maintenance is done when a machine stops	✗ nej	diskutér
Maintenance is done when a machine stops	→	Tool wear is judged by ear	✗ nej	diskutér
New jobs are quoted from the last similar job, not from the drawing	→	Deburring is done by whoever is free	✗ nej	diskutér
Tool wear is judged by ear	→	The customer's returns log and ours do not match	✗ nej	diskutér
Deburring is done by whoever is free	→	Maintenance is done when a machine stops	✗ nej	diskutér
New jobs are quoted from the last similar job, not from the drawing	→	Parts that pass our inspection fail the customer's	✗ nej	diskutér
Parts that pass our inspection fail the customer's	→	New jobs are quoted from the last similar job, not from the drawing	✗ nej	diskutér
The customer's returns log and ours do not match	→	New jobs are quoted from the last similar job, not from the drawing	✗ nej	diskutér
…	→	Setup sheets are in the setter's head, not on paper	✗ nej	diskutér
First-off inspection is skipped when the job is late	→	New jobs are quoted from the last similar job, not from the drawing	✗ nej	diskutér
…	→	Maintenance is done when a machine stops	✗ nej	diskutér
Parts that pass our inspection fail the customer's	→	…	✗ nej	diskutér
First-off inspection is skipped when the job is late	→	Setup sheets are in the setter's head, not on paper	✗ nej	diskutér
…	→	…	✗ nej	diskutér
New jobs are quoted from the last similar job, not from the drawing	→	Setup sheets are in the setter's head, not on paper	✗ nej	diskutér
New jobs are quoted from the last similar job, not from the drawing	→	Tool wear is judged by ear	✗ nej	diskutér
Maintenance is done when a machine stops	→	Parts that pass our inspection fail the customer's	✗ nej	diskutér
First-off inspection is skipped when the job is late	→	The customer's returns log and ours do not match	✗ nej	diskutér
Maintenance is done when a machine stops	→	New jobs are quoted from the last similar job, not from the drawing	✗ nej	diskutér
Maintenance is done when a machine stops	→	…	✗ nej	diskutér
First-off inspection is skipped when the job is late	→	Tool wear is judged by ear	✗ nej	diskutér
New jobs are quoted from the last similar job, not from the drawing	→	…	✗ nej	diskutér
…	→	Tool wear is judged by ear	✗ nej	diskutér
Deburring is done by whoever is free	→	New jobs are quoted from the last similar job, not from the drawing	✗ nej	diskutér
Parts that pass our inspection fail the customer's	→	First-off inspection is skipped when the job is late	✗ nej	diskutér
…	→	First-off inspection is skipped when the job is late	✗ nej	diskutér
…	→	First-off inspection is skipped when the job is late	✗ nej	diskutér
…	→	Parts that pass our inspection fail the customer's	✗ nej	diskutér
Setup sheets are in the setter's head, not on paper	→	First-off inspection is skipped when the job is late	✗ nej	diskutér
First-off inspection is skipped when the job is late	→	…	✗ nej	diskutér
Tool wear is judged by ear	→	…	✗ nej	diskutér
New jobs are quoted from the last similar job, not from the drawing	→	The customer's returns log and ours do not match	✗ nej	diskutér
Tool wear is judged by ear	→	First-off inspection is skipped when the job is late	✗ nej	diskutér
…	→	The customer's returns log and ours do not match	✗ nej	diskutér
…	→	Deburring is done by whoever is free	✗ nej	diskutér
Setup sheets are in the setter's head, not on paper	→	…	✗ nej	diskutér
…	→	New jobs are quoted from the last similar job, not from the drawing	✗ nej	diskutér
Setup sheets are in the setter's head, not on paper	→	The customer's returns log and ours do not match	✗ nej	diskutér
New jobs are quoted from the last similar job, not from the drawing	→	Maintenance is done when a machine stops	✗ nej	diskutér
Maintenance is done when a machine stops	→	…	✗ nej	diskutér
Parts that pass our inspection fail the customer's	→	…	✗ nej	diskutér