True Causes
RU
Bahasa IndonesiaDanskDeutschEnglishEspañolFrançaisItalianoNederlandsNorskPolskiPortuguêsSrpski (latinica)SvenskaTiếng ViệtTürkçeΕλληνικάРусскийСрпски (ћирилица)Українська中文日本語한국어
← в начало
7/7 · Действия · просмотр: Структурирование
людей: 30 · идей: 27
нажмите на завершенный этап, чтобы посмотреть его
✓
Сбор
✓
Пояснение
✓
Группировка
✓
Отбор
✓
Структурирование
✓
Карта
7
Действия
пробный прогон · не учитывается
препятствия · любой, у кого есть ссылка · в открытом списке · федерация включена
ведущий: ее ведущий (запечатана)
людей: 30 · идей: 27 · 2 группы
Паспорт → · Логика → · протокол
↗ поделиться этой картой
На другом сайте, как живая карта:
Как изображение: https://truecauses.org/d/9458191/map.svg
Как данные: все оцененные пары в этой комнате (CSV). У каждого утверждения есть свой адрес, /c/9458191/<card>, он указан под картой.
Укажите источник при публикации: Causal map: True Causes, https://truecauses.org/d/9458191
ВОПРОС

Why do parts that passed inspection come back?

Существенно ли одно влияет на другое? Решают три четверти поданных голосов.

закрыто · назад к этапу «Действия»
Вы смотрите как гость. Введите имя пользователя, чтобы присоединиться и участвовать.
Вопросы распределяются между группами, поэтому вы получаете те, что достались вашей группе, — а не все 180.
почему
Никто не смог бы ответить на несколько сотен пар. Каждая пара достается одной группе; пара, по которой мнения разделились, затем передается другим группам, поэтому она может позже появиться в вашем списке, хотя началась в другом месте. Число решенных включает работу всех групп, поэтому оно растет быстрее, чем сокращается ваш список.
решено: 176 / 180 ждут вашего ответа: 0
Последний подсчет: решено: 176 · передано панелям из нескольких групп: 1 · спорно: 0 · ниже кворума: 3 — панелям нужно не меньше max(2, 75% панели) поданных голосов; в вашей самой маленькой панели 15 участников.
закрыть ✕
Customers changed their inspection method and never told us → влияет на? → The oldest machine makes the tightest-tolerance part
Пока ничего не сказано.
Этап завершен — запись пар и голосов приведена выше.Проверить логику ↗
Batch traceability ends at the door→Temperature in the shop swings fifteen degrees between morning and afternoonоткрытообсудить
…→Deburring is done by whoever is freeоткрыто передано дальшеобсудить
Setup sheets are in the setter's head, not on paper→New jobs are quoted from the last similar job, not from the drawingоткрытообсудить
Maintenance is done when a machine stops→The customer's returns log and ours do not matchоткрытообсудить
Rework is not counted anywhere→Quotes are won on price, so cycle times are cut to the bone✓ даобсудить
Customers changed their inspection method and never told us→Operators are paid on parts per hour✓ даобсудить
Customers changed their inspection method and never told us→Coolant is changed when it smells, not on a schedule✓ даобсудить
Quotes are won on price, so cycle times are cut to the bone→The oldest machine makes the tightest-tolerance part✓ даобсудить
Quotes are won on price, so cycle times are cut to the bone→Operators are paid on parts per hour✓ даобсудить
The same operator runs the same machine for years and nobody checks the settings→The drawing on the floor is not the revision the customer ordered✓ даобсудить
Tool wear is judged by ear→Deburring is done by whoever is free✓ даобсудить
Deburring is done by whoever is free→Parts that pass our inspection fail the customer's✓ даобсудить
Parts that pass our inspection fail the customer's→The customer's returns log and ours do not match✓ даобсудить
Deburring is done by whoever is free→The customer's returns log and ours do not match✓ выведенообсудить
Quotes are won on price, so cycle times are cut to the bone→Coolant is changed when it smells, not on a schedule✗ нетобсудить
Temperature in the shop swings fifteen degrees between morning and afternoon→Quotes are won on price, so cycle times are cut to the bone✗ нетобсудить
Coolant is changed when it smells, not on a schedule→Quotes are won on price, so cycle times are cut to the bone✗ нетобсудить
The same operator runs the same machine for years and nobody checks the settings→Temperature in the shop swings fifteen degrees between morning and afternoon✗ нетобсудить
Rework is not counted anywhere→Temperature in the shop swings fifteen degrees between morning and afternoon✗ нетобсудить
Rework is not counted anywhere→Customers changed their inspection method and never told us✗ нетобсудить
The drawing on the floor is not the revision the customer ordered→The same operator runs the same machine for years and nobody checks the settings✗ нетобсудить
The drawing on the floor is not the revision the customer ordered→The oldest machine makes the tightest-tolerance part✗ нетобсудить
The drawing on the floor is not the revision the customer ordered→Coolant is changed when it smells, not on a schedule✗ нетобсудить
The drawing on the floor is not the revision the customer ordered→Batch traceability ends at the door✗ нетобсудить
Customers changed their inspection method and never told us→The oldest machine makes the tightest-tolerance part✗ нетв фокусе ↑ · закрыть ✕
Coolant is changed when it smells, not on a schedule→Customers changed their inspection method and never told us✗ нетобсудить
The same operator runs the same machine for years and nobody checks the settings→Quotes are won on price, so cycle times are cut to the bone✗ нетобсудить
Rework is not counted anywhere→The oldest machine makes the tightest-tolerance part✗ нетобсудить
Temperature in the shop swings fifteen degrees between morning and afternoon→Operators are paid on parts per hour✗ нетобсудить
The same operator runs the same machine for years and nobody checks the settings→Operators are paid on parts per hour✗ нетобсудить
Batch traceability ends at the door→Quotes are won on price, so cycle times are cut to the bone✗ нетобсудить
The drawing on the floor is not the revision the customer ordered→Customers changed their inspection method and never told us✗ нетобсудить
Quotes are won on price, so cycle times are cut to the bone→Customers changed their inspection method and never told us✗ нетобсудить
Temperature in the shop swings fifteen degrees between morning and afternoon→The oldest machine makes the tightest-tolerance part✗ нетобсудить
Rework is not counted anywhere→Batch traceability ends at the door✗ нетобсудить
The oldest machine makes the tightest-tolerance part→Temperature in the shop swings fifteen degrees between morning and afternoon✗ нетобсудить
Coolant is changed when it smells, not on a schedule→The oldest machine makes the tightest-tolerance part✗ нетобсудить
Operators are paid on parts per hour→The drawing on the floor is not the revision the customer ordered✗ нетобсудить
The drawing on the floor is not the revision the customer ordered→Quotes are won on price, so cycle times are cut to the bone✗ нетобсудить
Customers changed their inspection method and never told us→The drawing on the floor is not the revision the customer ordered✗ нетобсудить
Quotes are won on price, so cycle times are cut to the bone→Rework is not counted anywhere✗ нетобсудить
Customers changed their inspection method and never told us→Rework is not counted anywhere✗ нетобсудить
Quotes are won on price, so cycle times are cut to the bone→Batch traceability ends at the door✗ нетобсудить
The drawing on the floor is not the revision the customer ordered→Rework is not counted anywhere✗ нетобсудить
Operators are paid on parts per hour→Rework is not counted anywhere✗ нетобсудить
The oldest machine makes the tightest-tolerance part→Coolant is changed when it smells, not on a schedule✗ нетобсудить
Coolant is changed when it smells, not on a schedule→Batch traceability ends at the door✗ нетобсудить
Customers changed their inspection method and never told us→Temperature in the shop swings fifteen degrees between morning and afternoon✗ нетобсудить
Customers changed their inspection method and never told us→Batch traceability ends at the door✗ нетобсудить
Temperature in the shop swings fifteen degrees between morning and afternoon→Batch traceability ends at the door✗ нетобсудить
Temperature in the shop swings fifteen degrees between morning and afternoon→Coolant is changed when it smells, not on a schedule✗ нетобсудить
Batch traceability ends at the door→The oldest machine makes the tightest-tolerance part✗ нетобсудить
Coolant is changed when it smells, not on a schedule→Rework is not counted anywhere✗ нетобсудить
The oldest machine makes the tightest-tolerance part→The same operator runs the same machine for years and nobody checks the settings✗ нетобсудить
Operators are paid on parts per hour→Temperature in the shop swings fifteen degrees between morning and afternoon✗ нетобсудить
The same operator runs the same machine for years and nobody checks the settings→Customers changed their inspection method and never told us✗ нетобсудить
Batch traceability ends at the door→Coolant is changed when it smells, not on a schedule✗ нетобсудить
Operators are paid on parts per hour→Customers changed their inspection method and never told us✗ нетобсудить
Batch traceability ends at the door→Customers changed their inspection method and never told us✗ нетобсудить
Rework is not counted anywhere→The drawing on the floor is not the revision the customer ordered✗ нетобсудить
Operators are paid on parts per hour→The oldest machine makes the tightest-tolerance part✗ нетобсудить
Operators are paid on parts per hour→The same operator runs the same machine for years and nobody checks the settings✗ нетобсудить
The oldest machine makes the tightest-tolerance part→Rework is not counted anywhere✗ нетобсудить
Temperature in the shop swings fifteen degrees between morning and afternoon→The same operator runs the same machine for years and nobody checks the settings✗ нетобсудить
Batch traceability ends at the door→Operators are paid on parts per hour✗ нетобсудить
Temperature in the shop swings fifteen degrees between morning and afternoon→Customers changed their inspection method and never told us✗ нетобсудить
Coolant is changed when it smells, not on a schedule→The drawing on the floor is not the revision the customer ordered✗ нетобсудить
Operators are paid on parts per hour→Batch traceability ends at the door✗ нетобсудить
The oldest machine makes the tightest-tolerance part→Operators are paid on parts per hour✗ нетобсудить
Quotes are won on price, so cycle times are cut to the bone→The drawing on the floor is not the revision the customer ordered✗ нетобсудить
The oldest machine makes the tightest-tolerance part→The drawing on the floor is not the revision the customer ordered✗ нетобсудить
Temperature in the shop swings fifteen degrees between morning and afternoon→Rework is not counted anywhere✗ нетобсудить
Operators are paid on parts per hour→Quotes are won on price, so cycle times are cut to the bone✗ нетобсудить
The oldest machine makes the tightest-tolerance part→Quotes are won on price, so cycle times are cut to the bone✗ нетобсудить
The oldest machine makes the tightest-tolerance part→Batch traceability ends at the door✗ нетобсудить
Rework is not counted anywhere→Operators are paid on parts per hour✗ нетобсудить
Coolant is changed when it smells, not on a schedule→Temperature in the shop swings fifteen degrees between morning and afternoon✗ нетобсудить
The same operator runs the same machine for years and nobody checks the settings→Batch traceability ends at the door✗ нетобсудить
Coolant is changed when it smells, not on a schedule→The same operator runs the same machine for years and nobody checks the settings✗ нетобсудить
Quotes are won on price, so cycle times are cut to the bone→Temperature in the shop swings fifteen degrees between morning and afternoon✗ нетобсудить
The same operator runs the same machine for years and nobody checks the settings→Rework is not counted anywhere✗ нетобсудить
Customers changed their inspection method and never told us→The same operator runs the same machine for years and nobody checks the settings✗ нетобсудить
Rework is not counted anywhere→Coolant is changed when it smells, not on a schedule✗ нетобсудить
Rework is not counted anywhere→The same operator runs the same machine for years and nobody checks the settings✗ нетобсудить
The drawing on the floor is not the revision the customer ordered→Operators are paid on parts per hour✗ нетобсудить
The same operator runs the same machine for years and nobody checks the settings→The oldest machine makes the tightest-tolerance part✗ нетобсудить
Operators are paid on parts per hour→Coolant is changed when it smells, not on a schedule✗ нетобсудить
The same operator runs the same machine for years and nobody checks the settings→Coolant is changed when it smells, not on a schedule✗ нетобсудить
The oldest machine makes the tightest-tolerance part→Customers changed their inspection method and never told us✗ нетобсудить
Batch traceability ends at the door→The same operator runs the same machine for years and nobody checks the settings✗ нетобсудить
The drawing on the floor is not the revision the customer ordered→Temperature in the shop swings fifteen degrees between morning and afternoon✗ нетобсудить
Coolant is changed when it smells, not on a schedule→Operators are paid on parts per hour✗ нетобсудить
Customers changed their inspection method and never told us→Quotes are won on price, so cycle times are cut to the bone✗ нетобсудить
Temperature in the shop swings fifteen degrees between morning and afternoon→The drawing on the floor is not the revision the customer ordered✗ нетобсудить
Batch traceability ends at the door→Rework is not counted anywhere✗ нетобсудить
Batch traceability ends at the door→The drawing on the floor is not the revision the customer ordered✗ нетобсудить
Quotes are won on price, so cycle times are cut to the bone→The same operator runs the same machine for years and nobody checks the settings✗ нетобсудить
Deburring is done by whoever is free→Setup sheets are in the setter's head, not on paper✗ нетобсудить
Deburring is done by whoever is free→First-off inspection is skipped when the job is late✗ нетобсудить
New jobs are quoted from the last similar job, not from the drawing→First-off inspection is skipped when the job is late✗ нетобсудить
Deburring is done by whoever is free→…✗ нетобсудить
First-off inspection is skipped when the job is late→…✗ нетобсудить
The customer's returns log and ours do not match→…✗ нетобсудить
Setup sheets are in the setter's head, not on paper→Maintenance is done when a machine stops✗ нетобсудить
…→…✗ нетобсудить
Maintenance is done when a machine stops→Deburring is done by whoever is free✗ нетобсудить
The customer's returns log and ours do not match→Maintenance is done when a machine stops✗ нетобсудить
Setup sheets are in the setter's head, not on paper→…✗ нетобсудить
Deburring is done by whoever is free→Tool wear is judged by ear✗ нетобсудить
…→Parts that pass our inspection fail the customer's✗ нетобсудить
Tool wear is judged by ear→New jobs are quoted from the last similar job, not from the drawing✗ нетобсудить
New jobs are quoted from the last similar job, not from the drawing→…✗ нетобсудить
The customer's returns log and ours do not match→First-off inspection is skipped when the job is late✗ нетобсудить
…→New jobs are quoted from the last similar job, not from the drawing✗ нетобсудить
Setup sheets are in the setter's head, not on paper→Tool wear is judged by ear✗ нетобсудить
The customer's returns log and ours do not match→Parts that pass our inspection fail the customer's✗ нетобсудить
Parts that pass our inspection fail the customer's→Deburring is done by whoever is free✗ нетобсудить
Tool wear is judged by ear→Maintenance is done when a machine stops✗ нетобсудить
…→Tool wear is judged by ear✗ нетобсудить
First-off inspection is skipped when the job is late→Deburring is done by whoever is free✗ нетобсудить
…→The customer's returns log and ours do not match✗ нетобсудить
Tool wear is judged by ear→Parts that pass our inspection fail the customer's✗ нетобсудить
The customer's returns log and ours do not match→Tool wear is judged by ear✗ нетобсудить
Tool wear is judged by ear→…✗ нетобсудить
Maintenance is done when a machine stops→Setup sheets are in the setter's head, not on paper✗ нетобсудить
First-off inspection is skipped when the job is late→Maintenance is done when a machine stops✗ нетобсудить
The customer's returns log and ours do not match→Deburring is done by whoever is free✗ нетобсудить
Parts that pass our inspection fail the customer's→Tool wear is judged by ear✗ нетобсудить
Parts that pass our inspection fail the customer's→Setup sheets are in the setter's head, not on paper✗ нетобсудить
The customer's returns log and ours do not match→Setup sheets are in the setter's head, not on paper✗ нетобсудить
Setup sheets are in the setter's head, not on paper→Deburring is done by whoever is free✗ нетобсудить
Parts that pass our inspection fail the customer's→Maintenance is done when a machine stops✗ нетобсудить
First-off inspection is skipped when the job is late→Parts that pass our inspection fail the customer's✗ нетобсудить
The customer's returns log and ours do not match→…✗ нетобсудить
Tool wear is judged by ear→Setup sheets are in the setter's head, not on paper✗ нетобсудить
Maintenance is done when a machine stops→First-off inspection is skipped when the job is late✗ нетобсудить
…→Setup sheets are in the setter's head, not on paper✗ нетобсудить
Setup sheets are in the setter's head, not on paper→Parts that pass our inspection fail the customer's✗ нетобсудить
Deburring is done by whoever is free→…✗ нетобсудить
…→Maintenance is done when a machine stops✗ нетобсудить
Maintenance is done when a machine stops→Tool wear is judged by ear✗ нетобсудить
New jobs are quoted from the last similar job, not from the drawing→Deburring is done by whoever is free✗ нетобсудить
Tool wear is judged by ear→The customer's returns log and ours do not match✗ нетобсудить
Deburring is done by whoever is free→Maintenance is done when a machine stops✗ нетобсудить
New jobs are quoted from the last similar job, not from the drawing→Parts that pass our inspection fail the customer's✗ нетобсудить
Parts that pass our inspection fail the customer's→New jobs are quoted from the last similar job, not from the drawing✗ нетобсудить
The customer's returns log and ours do not match→New jobs are quoted from the last similar job, not from the drawing✗ нетобсудить
…→Setup sheets are in the setter's head, not on paper✗ нетобсудить
First-off inspection is skipped when the job is late→New jobs are quoted from the last similar job, not from the drawing✗ нетобсудить
…→Maintenance is done when a machine stops✗ нетобсудить
Parts that pass our inspection fail the customer's→…✗ нетобсудить
First-off inspection is skipped when the job is late→Setup sheets are in the setter's head, not on paper✗ нетобсудить
…→…✗ нетобсудить
New jobs are quoted from the last similar job, not from the drawing→Setup sheets are in the setter's head, not on paper✗ нетобсудить
New jobs are quoted from the last similar job, not from the drawing→Tool wear is judged by ear✗ нетобсудить
Maintenance is done when a machine stops→Parts that pass our inspection fail the customer's✗ нетобсудить
First-off inspection is skipped when the job is late→The customer's returns log and ours do not match✗ нетобсудить
Maintenance is done when a machine stops→New jobs are quoted from the last similar job, not from the drawing✗ нетобсудить
Maintenance is done when a machine stops→…✗ нетобсудить
First-off inspection is skipped when the job is late→Tool wear is judged by ear✗ нетобсудить
New jobs are quoted from the last similar job, not from the drawing→…✗ нетобсудить
…→Tool wear is judged by ear✗ нетобсудить
Deburring is done by whoever is free→New jobs are quoted from the last similar job, not from the drawing✗ нетобсудить
Parts that pass our inspection fail the customer's→First-off inspection is skipped when the job is late✗ нетобсудить
…→First-off inspection is skipped when the job is late✗ нетобсудить
…→First-off inspection is skipped when the job is late✗ нетобсудить
…→Parts that pass our inspection fail the customer's✗ нетобсудить
Setup sheets are in the setter's head, not on paper→First-off inspection is skipped when the job is late✗ нетобсудить
First-off inspection is skipped when the job is late→…✗ нетобсудить
Tool wear is judged by ear→…✗ нетобсудить
New jobs are quoted from the last similar job, not from the drawing→The customer's returns log and ours do not match✗ нетобсудить
Tool wear is judged by ear→First-off inspection is skipped when the job is late✗ нетобсудить
…→The customer's returns log and ours do not match✗ нетобсудить
…→Deburring is done by whoever is free✗ нетобсудить
Setup sheets are in the setter's head, not on paper→…✗ нетобсудить
…→New jobs are quoted from the last similar job, not from the drawing✗ нетобсудить
Setup sheets are in the setter's head, not on paper→The customer's returns log and ours do not match✗ нетобсудить
New jobs are quoted from the last similar job, not from the drawing→Maintenance is done when a machine stops✗ нетобсудить
Maintenance is done when a machine stops→…✗ нетобсудить
Parts that pass our inspection fail the customer's→…✗ нетобсудить