Структурування · Why do parts that passed inspection come back?

ПИТАННЯ

Why do parts that passed inspection come back?

Чи суттєво одне впливає на інше? Вирішують три чверті поданих голосів.

Ви переглядаєте як гість. Введіть ім’я користувача, щоб приєднатися й брати участь.

Питання розподіляються між групами, тож ви отримуєте ті, що дісталися вашій групі, — а не всі 180.

чому

Ніхто не зміг би відповісти на кілька сотень пар. Кожна пара дістається одній групі; пару, у якій думки розділилися, потім передають іншим групам, тож вона може пізніше з’явитися у вашому списку, хоча почалася деінде. Кількість вирішених охоплює роботу всіх груп, тому вона росте швидше, ніж скорочується ваш список.

вирішено: 176 / 180 чекають вашої відповіді: 0

Останній підрахунок: вирішено: 176 · передано міжгруповим панелям: 1 · спірно: 0 · нижче кворуму: 3 — панелям потрібно щонайменше max(2, 75% панелі) поданих голосів; у вашій найменшій панелі 15 учасників.

закрити ✕

Customers changed their inspection method and never told us → впливає на? → Rework is not counted anywhere

Ще нічого не сказано.

Етап завершено — запис пар і голосів наведено вище.Перевірити логіку ↗

Batch traceability ends at the door	→	Temperature in the shop swings fifteen degrees between morning and afternoon	відкрито	обговорити
…	→	Deburring is done by whoever is free	відкрито передано далі	обговорити
Setup sheets are in the setter's head, not on paper	→	New jobs are quoted from the last similar job, not from the drawing	відкрито	обговорити
Maintenance is done when a machine stops	→	The customer's returns log and ours do not match	відкрито	обговорити
Rework is not counted anywhere	→	Quotes are won on price, so cycle times are cut to the bone	✓ так	обговорити
Customers changed their inspection method and never told us	→	Operators are paid on parts per hour	✓ так	обговорити
Customers changed their inspection method and never told us	→	Coolant is changed when it smells, not on a schedule	✓ так	обговорити
Quotes are won on price, so cycle times are cut to the bone	→	The oldest machine makes the tightest-tolerance part	✓ так	обговорити
Quotes are won on price, so cycle times are cut to the bone	→	Operators are paid on parts per hour	✓ так	обговорити
The same operator runs the same machine for years and nobody checks the settings	→	The drawing on the floor is not the revision the customer ordered	✓ так	обговорити
Tool wear is judged by ear	→	Deburring is done by whoever is free	✓ так	обговорити
Deburring is done by whoever is free	→	Parts that pass our inspection fail the customer's	✓ так	обговорити
Parts that pass our inspection fail the customer's	→	The customer's returns log and ours do not match	✓ так	обговорити
Deburring is done by whoever is free	→	The customer's returns log and ours do not match	✓ виведено	обговорити
Quotes are won on price, so cycle times are cut to the bone	→	Coolant is changed when it smells, not on a schedule	✗ ні	обговорити
Temperature in the shop swings fifteen degrees between morning and afternoon	→	Quotes are won on price, so cycle times are cut to the bone	✗ ні	обговорити
Coolant is changed when it smells, not on a schedule	→	Quotes are won on price, so cycle times are cut to the bone	✗ ні	обговорити
The same operator runs the same machine for years and nobody checks the settings	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ ні	обговорити
Rework is not counted anywhere	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ ні	обговорити
Rework is not counted anywhere	→	Customers changed their inspection method and never told us	✗ ні	обговорити
The drawing on the floor is not the revision the customer ordered	→	The same operator runs the same machine for years and nobody checks the settings	✗ ні	обговорити
The drawing on the floor is not the revision the customer ordered	→	The oldest machine makes the tightest-tolerance part	✗ ні	обговорити
The drawing on the floor is not the revision the customer ordered	→	Coolant is changed when it smells, not on a schedule	✗ ні	обговорити
The drawing on the floor is not the revision the customer ordered	→	Batch traceability ends at the door	✗ ні	обговорити
Customers changed their inspection method and never told us	→	The oldest machine makes the tightest-tolerance part	✗ ні	обговорити
Coolant is changed when it smells, not on a schedule	→	Customers changed their inspection method and never told us	✗ ні	обговорити
The same operator runs the same machine for years and nobody checks the settings	→	Quotes are won on price, so cycle times are cut to the bone	✗ ні	обговорити
Rework is not counted anywhere	→	The oldest machine makes the tightest-tolerance part	✗ ні	обговорити
Temperature in the shop swings fifteen degrees between morning and afternoon	→	Operators are paid on parts per hour	✗ ні	обговорити
The same operator runs the same machine for years and nobody checks the settings	→	Operators are paid on parts per hour	✗ ні	обговорити
Batch traceability ends at the door	→	Quotes are won on price, so cycle times are cut to the bone	✗ ні	обговорити
The drawing on the floor is not the revision the customer ordered	→	Customers changed their inspection method and never told us	✗ ні	обговорити
Quotes are won on price, so cycle times are cut to the bone	→	Customers changed their inspection method and never told us	✗ ні	обговорити
Temperature in the shop swings fifteen degrees between morning and afternoon	→	The oldest machine makes the tightest-tolerance part	✗ ні	обговорити
Rework is not counted anywhere	→	Batch traceability ends at the door	✗ ні	обговорити
The oldest machine makes the tightest-tolerance part	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ ні	обговорити
Coolant is changed when it smells, not on a schedule	→	The oldest machine makes the tightest-tolerance part	✗ ні	обговорити
Operators are paid on parts per hour	→	The drawing on the floor is not the revision the customer ordered	✗ ні	обговорити
The drawing on the floor is not the revision the customer ordered	→	Quotes are won on price, so cycle times are cut to the bone	✗ ні	обговорити
Customers changed their inspection method and never told us	→	The drawing on the floor is not the revision the customer ordered	✗ ні	обговорити
Quotes are won on price, so cycle times are cut to the bone	→	Rework is not counted anywhere	✗ ні	обговорити
Customers changed their inspection method and never told us	→	Rework is not counted anywhere	✗ ні	у фокусі ↑ · закрити ✕
Quotes are won on price, so cycle times are cut to the bone	→	Batch traceability ends at the door	✗ ні	обговорити
The drawing on the floor is not the revision the customer ordered	→	Rework is not counted anywhere	✗ ні	обговорити
Operators are paid on parts per hour	→	Rework is not counted anywhere	✗ ні	обговорити
The oldest machine makes the tightest-tolerance part	→	Coolant is changed when it smells, not on a schedule	✗ ні	обговорити
Coolant is changed when it smells, not on a schedule	→	Batch traceability ends at the door	✗ ні	обговорити
Customers changed their inspection method and never told us	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ ні	обговорити
Customers changed their inspection method and never told us	→	Batch traceability ends at the door	✗ ні	обговорити
Temperature in the shop swings fifteen degrees between morning and afternoon	→	Batch traceability ends at the door	✗ ні	обговорити
Temperature in the shop swings fifteen degrees between morning and afternoon	→	Coolant is changed when it smells, not on a schedule	✗ ні	обговорити
Batch traceability ends at the door	→	The oldest machine makes the tightest-tolerance part	✗ ні	обговорити
Coolant is changed when it smells, not on a schedule	→	Rework is not counted anywhere	✗ ні	обговорити
The oldest machine makes the tightest-tolerance part	→	The same operator runs the same machine for years and nobody checks the settings	✗ ні	обговорити
Operators are paid on parts per hour	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ ні	обговорити
The same operator runs the same machine for years and nobody checks the settings	→	Customers changed their inspection method and never told us	✗ ні	обговорити
Batch traceability ends at the door	→	Coolant is changed when it smells, not on a schedule	✗ ні	обговорити
Operators are paid on parts per hour	→	Customers changed their inspection method and never told us	✗ ні	обговорити
Batch traceability ends at the door	→	Customers changed their inspection method and never told us	✗ ні	обговорити
Rework is not counted anywhere	→	The drawing on the floor is not the revision the customer ordered	✗ ні	обговорити
Operators are paid on parts per hour	→	The oldest machine makes the tightest-tolerance part	✗ ні	обговорити
Operators are paid on parts per hour	→	The same operator runs the same machine for years and nobody checks the settings	✗ ні	обговорити
The oldest machine makes the tightest-tolerance part	→	Rework is not counted anywhere	✗ ні	обговорити
Temperature in the shop swings fifteen degrees between morning and afternoon	→	The same operator runs the same machine for years and nobody checks the settings	✗ ні	обговорити
Batch traceability ends at the door	→	Operators are paid on parts per hour	✗ ні	обговорити
Temperature in the shop swings fifteen degrees between morning and afternoon	→	Customers changed their inspection method and never told us	✗ ні	обговорити
Coolant is changed when it smells, not on a schedule	→	The drawing on the floor is not the revision the customer ordered	✗ ні	обговорити
Operators are paid on parts per hour	→	Batch traceability ends at the door	✗ ні	обговорити
The oldest machine makes the tightest-tolerance part	→	Operators are paid on parts per hour	✗ ні	обговорити
Quotes are won on price, so cycle times are cut to the bone	→	The drawing on the floor is not the revision the customer ordered	✗ ні	обговорити
The oldest machine makes the tightest-tolerance part	→	The drawing on the floor is not the revision the customer ordered	✗ ні	обговорити
Temperature in the shop swings fifteen degrees between morning and afternoon	→	Rework is not counted anywhere	✗ ні	обговорити
Operators are paid on parts per hour	→	Quotes are won on price, so cycle times are cut to the bone	✗ ні	обговорити
The oldest machine makes the tightest-tolerance part	→	Quotes are won on price, so cycle times are cut to the bone	✗ ні	обговорити
The oldest machine makes the tightest-tolerance part	→	Batch traceability ends at the door	✗ ні	обговорити
Rework is not counted anywhere	→	Operators are paid on parts per hour	✗ ні	обговорити
Coolant is changed when it smells, not on a schedule	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ ні	обговорити
The same operator runs the same machine for years and nobody checks the settings	→	Batch traceability ends at the door	✗ ні	обговорити
Coolant is changed when it smells, not on a schedule	→	The same operator runs the same machine for years and nobody checks the settings	✗ ні	обговорити
Quotes are won on price, so cycle times are cut to the bone	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ ні	обговорити
The same operator runs the same machine for years and nobody checks the settings	→	Rework is not counted anywhere	✗ ні	обговорити
Customers changed their inspection method and never told us	→	The same operator runs the same machine for years and nobody checks the settings	✗ ні	обговорити
Rework is not counted anywhere	→	Coolant is changed when it smells, not on a schedule	✗ ні	обговорити
Rework is not counted anywhere	→	The same operator runs the same machine for years and nobody checks the settings	✗ ні	обговорити
The drawing on the floor is not the revision the customer ordered	→	Operators are paid on parts per hour	✗ ні	обговорити
The same operator runs the same machine for years and nobody checks the settings	→	The oldest machine makes the tightest-tolerance part	✗ ні	обговорити
Operators are paid on parts per hour	→	Coolant is changed when it smells, not on a schedule	✗ ні	обговорити
The same operator runs the same machine for years and nobody checks the settings	→	Coolant is changed when it smells, not on a schedule	✗ ні	обговорити
The oldest machine makes the tightest-tolerance part	→	Customers changed their inspection method and never told us	✗ ні	обговорити
Batch traceability ends at the door	→	The same operator runs the same machine for years and nobody checks the settings	✗ ні	обговорити
The drawing on the floor is not the revision the customer ordered	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ ні	обговорити
Coolant is changed when it smells, not on a schedule	→	Operators are paid on parts per hour	✗ ні	обговорити
Customers changed their inspection method and never told us	→	Quotes are won on price, so cycle times are cut to the bone	✗ ні	обговорити
Temperature in the shop swings fifteen degrees between morning and afternoon	→	The drawing on the floor is not the revision the customer ordered	✗ ні	обговорити
Batch traceability ends at the door	→	Rework is not counted anywhere	✗ ні	обговорити
Batch traceability ends at the door	→	The drawing on the floor is not the revision the customer ordered	✗ ні	обговорити
Quotes are won on price, so cycle times are cut to the bone	→	The same operator runs the same machine for years and nobody checks the settings	✗ ні	обговорити
Deburring is done by whoever is free	→	Setup sheets are in the setter's head, not on paper	✗ ні	обговорити
Deburring is done by whoever is free	→	First-off inspection is skipped when the job is late	✗ ні	обговорити
New jobs are quoted from the last similar job, not from the drawing	→	First-off inspection is skipped when the job is late	✗ ні	обговорити
Deburring is done by whoever is free	→	…	✗ ні	обговорити
First-off inspection is skipped when the job is late	→	…	✗ ні	обговорити
The customer's returns log and ours do not match	→	…	✗ ні	обговорити
Setup sheets are in the setter's head, not on paper	→	Maintenance is done when a machine stops	✗ ні	обговорити
…	→	…	✗ ні	обговорити
Maintenance is done when a machine stops	→	Deburring is done by whoever is free	✗ ні	обговорити
The customer's returns log and ours do not match	→	Maintenance is done when a machine stops	✗ ні	обговорити
Setup sheets are in the setter's head, not on paper	→	…	✗ ні	обговорити
Deburring is done by whoever is free	→	Tool wear is judged by ear	✗ ні	обговорити
…	→	Parts that pass our inspection fail the customer's	✗ ні	обговорити
Tool wear is judged by ear	→	New jobs are quoted from the last similar job, not from the drawing	✗ ні	обговорити
New jobs are quoted from the last similar job, not from the drawing	→	…	✗ ні	обговорити
The customer's returns log and ours do not match	→	First-off inspection is skipped when the job is late	✗ ні	обговорити
…	→	New jobs are quoted from the last similar job, not from the drawing	✗ ні	обговорити
Setup sheets are in the setter's head, not on paper	→	Tool wear is judged by ear	✗ ні	обговорити
The customer's returns log and ours do not match	→	Parts that pass our inspection fail the customer's	✗ ні	обговорити
Parts that pass our inspection fail the customer's	→	Deburring is done by whoever is free	✗ ні	обговорити
Tool wear is judged by ear	→	Maintenance is done when a machine stops	✗ ні	обговорити
…	→	Tool wear is judged by ear	✗ ні	обговорити
First-off inspection is skipped when the job is late	→	Deburring is done by whoever is free	✗ ні	обговорити
…	→	The customer's returns log and ours do not match	✗ ні	обговорити
Tool wear is judged by ear	→	Parts that pass our inspection fail the customer's	✗ ні	обговорити
The customer's returns log and ours do not match	→	Tool wear is judged by ear	✗ ні	обговорити
Tool wear is judged by ear	→	…	✗ ні	обговорити
Maintenance is done when a machine stops	→	Setup sheets are in the setter's head, not on paper	✗ ні	обговорити
First-off inspection is skipped when the job is late	→	Maintenance is done when a machine stops	✗ ні	обговорити
The customer's returns log and ours do not match	→	Deburring is done by whoever is free	✗ ні	обговорити
Parts that pass our inspection fail the customer's	→	Tool wear is judged by ear	✗ ні	обговорити
Parts that pass our inspection fail the customer's	→	Setup sheets are in the setter's head, not on paper	✗ ні	обговорити
The customer's returns log and ours do not match	→	Setup sheets are in the setter's head, not on paper	✗ ні	обговорити
Setup sheets are in the setter's head, not on paper	→	Deburring is done by whoever is free	✗ ні	обговорити
Parts that pass our inspection fail the customer's	→	Maintenance is done when a machine stops	✗ ні	обговорити
First-off inspection is skipped when the job is late	→	Parts that pass our inspection fail the customer's	✗ ні	обговорити
The customer's returns log and ours do not match	→	…	✗ ні	обговорити
Tool wear is judged by ear	→	Setup sheets are in the setter's head, not on paper	✗ ні	обговорити
Maintenance is done when a machine stops	→	First-off inspection is skipped when the job is late	✗ ні	обговорити
…	→	Setup sheets are in the setter's head, not on paper	✗ ні	обговорити
Setup sheets are in the setter's head, not on paper	→	Parts that pass our inspection fail the customer's	✗ ні	обговорити
Deburring is done by whoever is free	→	…	✗ ні	обговорити
…	→	Maintenance is done when a machine stops	✗ ні	обговорити
Maintenance is done when a machine stops	→	Tool wear is judged by ear	✗ ні	обговорити
New jobs are quoted from the last similar job, not from the drawing	→	Deburring is done by whoever is free	✗ ні	обговорити
Tool wear is judged by ear	→	The customer's returns log and ours do not match	✗ ні	обговорити
Deburring is done by whoever is free	→	Maintenance is done when a machine stops	✗ ні	обговорити
New jobs are quoted from the last similar job, not from the drawing	→	Parts that pass our inspection fail the customer's	✗ ні	обговорити
Parts that pass our inspection fail the customer's	→	New jobs are quoted from the last similar job, not from the drawing	✗ ні	обговорити
The customer's returns log and ours do not match	→	New jobs are quoted from the last similar job, not from the drawing	✗ ні	обговорити
…	→	Setup sheets are in the setter's head, not on paper	✗ ні	обговорити
First-off inspection is skipped when the job is late	→	New jobs are quoted from the last similar job, not from the drawing	✗ ні	обговорити
…	→	Maintenance is done when a machine stops	✗ ні	обговорити
Parts that pass our inspection fail the customer's	→	…	✗ ні	обговорити
First-off inspection is skipped when the job is late	→	Setup sheets are in the setter's head, not on paper	✗ ні	обговорити
…	→	…	✗ ні	обговорити
New jobs are quoted from the last similar job, not from the drawing	→	Setup sheets are in the setter's head, not on paper	✗ ні	обговорити
New jobs are quoted from the last similar job, not from the drawing	→	Tool wear is judged by ear	✗ ні	обговорити
Maintenance is done when a machine stops	→	Parts that pass our inspection fail the customer's	✗ ні	обговорити
First-off inspection is skipped when the job is late	→	The customer's returns log and ours do not match	✗ ні	обговорити
Maintenance is done when a machine stops	→	New jobs are quoted from the last similar job, not from the drawing	✗ ні	обговорити
Maintenance is done when a machine stops	→	…	✗ ні	обговорити
First-off inspection is skipped when the job is late	→	Tool wear is judged by ear	✗ ні	обговорити
New jobs are quoted from the last similar job, not from the drawing	→	…	✗ ні	обговорити
…	→	Tool wear is judged by ear	✗ ні	обговорити
Deburring is done by whoever is free	→	New jobs are quoted from the last similar job, not from the drawing	✗ ні	обговорити
Parts that pass our inspection fail the customer's	→	First-off inspection is skipped when the job is late	✗ ні	обговорити
…	→	First-off inspection is skipped when the job is late	✗ ні	обговорити
…	→	First-off inspection is skipped when the job is late	✗ ні	обговорити
…	→	Parts that pass our inspection fail the customer's	✗ ні	обговорити
Setup sheets are in the setter's head, not on paper	→	First-off inspection is skipped when the job is late	✗ ні	обговорити
First-off inspection is skipped when the job is late	→	…	✗ ні	обговорити
Tool wear is judged by ear	→	…	✗ ні	обговорити
New jobs are quoted from the last similar job, not from the drawing	→	The customer's returns log and ours do not match	✗ ні	обговорити
Tool wear is judged by ear	→	First-off inspection is skipped when the job is late	✗ ні	обговорити
…	→	The customer's returns log and ours do not match	✗ ні	обговорити
…	→	Deburring is done by whoever is free	✗ ні	обговорити
Setup sheets are in the setter's head, not on paper	→	…	✗ ні	обговорити
…	→	New jobs are quoted from the last similar job, not from the drawing	✗ ні	обговорити
Setup sheets are in the setter's head, not on paper	→	The customer's returns log and ours do not match	✗ ні	обговорити
New jobs are quoted from the last similar job, not from the drawing	→	Maintenance is done when a machine stops	✗ ні	обговорити
Maintenance is done when a machine stops	→	…	✗ ні	обговорити
Parts that pass our inspection fail the customer's	→	…	✗ ні	обговорити