SPØRSMÅLET
Why do parts that passed inspection come back?
Si hva du mente. To kort slås sammen bare hvis begge forfatterne er enige.
stengt · tilbake til fasen Tiltak
Du ser på som gjest. Skriv inn et brukernavn for å bli med og delta.
Slå sammen duplikater
Bare for to kort som fremsetter samme påstand.
hvorfor
En sammenslåing skjer bare når begge forfatterne samtykker. Diskuter betydningen i kortets sidechat før noe slås sammen.
slått sammen "When a part comes back we just…" → "A returned part is remade, not…"
Maintenance is done when a machine stops
klynge 2diskuter
The customer's returns log and ours do not match
Meaning the repeat returns, not the one bad batch in spring.
Sales promises tolerances the machines cannot hold reliably
Packaging damages parts that were fine when they left the machine
klynge 2diskuter
Tool wear is judged by ear
Meaning the repeat returns, not the one bad batch in spring.
klynge 3diskuter
Setup sheets are in the setter's head, not on paper
klynge 1diskuter
The one person who can read the CMM output left last year
I mean this is how it goes most weeks.
klynge 1diskuter
Deburring is done by whoever is free
Batch traceability ends at the door
Night shift has no inspector
The same operator runs the same machine for years and nobody checks the settings
New jobs are quoted from the last similar job, not from the drawing
I mean this is how it goes most weeks.
Nobody has asked the customer what they measure
klynge 4diskuter
Quotes are won on price, so cycle times are cut to the bone
I mean this is how it goes most weeks.
The drawing on the floor is not the revision the customer ordered
The oldest machine makes the tightest-tolerance part
Coolant is changed when it smells, not on a schedule
klynge 3diskuter
Material certificates are filed but never read
First-off inspection is skipped when the job is late
Meaning the repeat returns, not the one bad batch in spring.
Parts that pass our inspection fail the customer's
A returned part is remade, not investigated
Meaning the repeat returns, not the one bad batch in spring.
Customers changed their inspection method and never told us
Our gauges are calibrated once a year, theirs every month
Meaning the repeat returns, not the one bad batch in spring.
klynge 4diskuter
Operators are paid on parts per hour
Temperature in the shop swings fifteen degrees between morning and afternoon