구조 잡기 · Why do parts that passed inspection come back?

질문

Why do parts that passed inspection come back?

한쪽이 다른 쪽에 크게 영향을 줍니까? 던진 표의 4분의 3으로 정합니다.

게스트로 보는 중. 참여하려면 닉네임을 입력하세요.

질문은 그룹별로 나뉘어, 내 그룹이 받은 질문만 나옵니다. 전체 180개가 다 나오지는 않습니다.

이유

수백 개의 쌍을 혼자 답할 수는 없습니다. 각 쌍은 한 그룹에 갑니다. 의견이 갈린 쌍은 다른 그룹에 넘어가므로, 다른 곳에서 시작한 쌍이 나중에 내 목록에 나올 수 있습니다. 확정된 수에는 모든 그룹의 작업이 들어가므로, 내 목록이 줄어드는 것보다 빨리 늘어납니다.

확정 176 / 180 내가 답할 질문 0개

지난 집계: 결정 176 · 그룹 간 패널로 넘김 1 · 이견 있음 0 · 최소 인원 미달 3 — 패널마다 던진 표가 최소 max(2, 패널의 75%) 필요합니다. 가장 작은 패널의 멤버는 15명입니다.

닫기 ✕

Tool wear is judged by ear → 영향을 주나? → Deburring is done by whoever is free

아직 아무 말도 없습니다.

끝난 단계입니다. 쌍과 투표 기록은 위에 있습니다.논리 확인 ↗

Batch traceability ends at the door	→	Temperature in the shop swings fifteen degrees between morning and afternoon	미결	논의하기
…	→	Deburring is done by whoever is free	미결 넘김	논의하기
Setup sheets are in the setter's head, not on paper	→	New jobs are quoted from the last similar job, not from the drawing	미결	논의하기
Maintenance is done when a machine stops	→	The customer's returns log and ours do not match	미결	논의하기
Rework is not counted anywhere	→	Quotes are won on price, so cycle times are cut to the bone	✓ 예	논의하기
Customers changed their inspection method and never told us	→	Operators are paid on parts per hour	✓ 예	논의하기
Customers changed their inspection method and never told us	→	Coolant is changed when it smells, not on a schedule	✓ 예	논의하기
Quotes are won on price, so cycle times are cut to the bone	→	The oldest machine makes the tightest-tolerance part	✓ 예	논의하기
Quotes are won on price, so cycle times are cut to the bone	→	Operators are paid on parts per hour	✓ 예	논의하기
The same operator runs the same machine for years and nobody checks the settings	→	The drawing on the floor is not the revision the customer ordered	✓ 예	논의하기
Tool wear is judged by ear	→	Deburring is done by whoever is free	✓ 예	보는 중 ↑ · 닫기 ✕
Deburring is done by whoever is free	→	Parts that pass our inspection fail the customer's	✓ 예	논의하기
Parts that pass our inspection fail the customer's	→	The customer's returns log and ours do not match	✓ 예	논의하기
Deburring is done by whoever is free	→	The customer's returns log and ours do not match	✓ 추론됨	논의하기
Quotes are won on price, so cycle times are cut to the bone	→	Coolant is changed when it smells, not on a schedule	✗ 아니요	논의하기
Temperature in the shop swings fifteen degrees between morning and afternoon	→	Quotes are won on price, so cycle times are cut to the bone	✗ 아니요	논의하기
Coolant is changed when it smells, not on a schedule	→	Quotes are won on price, so cycle times are cut to the bone	✗ 아니요	논의하기
The same operator runs the same machine for years and nobody checks the settings	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ 아니요	논의하기
Rework is not counted anywhere	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ 아니요	논의하기
Rework is not counted anywhere	→	Customers changed their inspection method and never told us	✗ 아니요	논의하기
The drawing on the floor is not the revision the customer ordered	→	The same operator runs the same machine for years and nobody checks the settings	✗ 아니요	논의하기
The drawing on the floor is not the revision the customer ordered	→	The oldest machine makes the tightest-tolerance part	✗ 아니요	논의하기
The drawing on the floor is not the revision the customer ordered	→	Coolant is changed when it smells, not on a schedule	✗ 아니요	논의하기
The drawing on the floor is not the revision the customer ordered	→	Batch traceability ends at the door	✗ 아니요	논의하기
Customers changed their inspection method and never told us	→	The oldest machine makes the tightest-tolerance part	✗ 아니요	논의하기
Coolant is changed when it smells, not on a schedule	→	Customers changed their inspection method and never told us	✗ 아니요	논의하기
The same operator runs the same machine for years and nobody checks the settings	→	Quotes are won on price, so cycle times are cut to the bone	✗ 아니요	논의하기
Rework is not counted anywhere	→	The oldest machine makes the tightest-tolerance part	✗ 아니요	논의하기
Temperature in the shop swings fifteen degrees between morning and afternoon	→	Operators are paid on parts per hour	✗ 아니요	논의하기
The same operator runs the same machine for years and nobody checks the settings	→	Operators are paid on parts per hour	✗ 아니요	논의하기
Batch traceability ends at the door	→	Quotes are won on price, so cycle times are cut to the bone	✗ 아니요	논의하기
The drawing on the floor is not the revision the customer ordered	→	Customers changed their inspection method and never told us	✗ 아니요	논의하기
Quotes are won on price, so cycle times are cut to the bone	→	Customers changed their inspection method and never told us	✗ 아니요	논의하기
Temperature in the shop swings fifteen degrees between morning and afternoon	→	The oldest machine makes the tightest-tolerance part	✗ 아니요	논의하기
Rework is not counted anywhere	→	Batch traceability ends at the door	✗ 아니요	논의하기
The oldest machine makes the tightest-tolerance part	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ 아니요	논의하기
Coolant is changed when it smells, not on a schedule	→	The oldest machine makes the tightest-tolerance part	✗ 아니요	논의하기
Operators are paid on parts per hour	→	The drawing on the floor is not the revision the customer ordered	✗ 아니요	논의하기
The drawing on the floor is not the revision the customer ordered	→	Quotes are won on price, so cycle times are cut to the bone	✗ 아니요	논의하기
Customers changed their inspection method and never told us	→	The drawing on the floor is not the revision the customer ordered	✗ 아니요	논의하기
Quotes are won on price, so cycle times are cut to the bone	→	Rework is not counted anywhere	✗ 아니요	논의하기
Customers changed their inspection method and never told us	→	Rework is not counted anywhere	✗ 아니요	논의하기
Quotes are won on price, so cycle times are cut to the bone	→	Batch traceability ends at the door	✗ 아니요	논의하기
The drawing on the floor is not the revision the customer ordered	→	Rework is not counted anywhere	✗ 아니요	논의하기
Operators are paid on parts per hour	→	Rework is not counted anywhere	✗ 아니요	논의하기
The oldest machine makes the tightest-tolerance part	→	Coolant is changed when it smells, not on a schedule	✗ 아니요	논의하기
Coolant is changed when it smells, not on a schedule	→	Batch traceability ends at the door	✗ 아니요	논의하기
Customers changed their inspection method and never told us	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ 아니요	논의하기
Customers changed their inspection method and never told us	→	Batch traceability ends at the door	✗ 아니요	논의하기
Temperature in the shop swings fifteen degrees between morning and afternoon	→	Batch traceability ends at the door	✗ 아니요	논의하기
Temperature in the shop swings fifteen degrees between morning and afternoon	→	Coolant is changed when it smells, not on a schedule	✗ 아니요	논의하기
Batch traceability ends at the door	→	The oldest machine makes the tightest-tolerance part	✗ 아니요	논의하기
Coolant is changed when it smells, not on a schedule	→	Rework is not counted anywhere	✗ 아니요	논의하기
The oldest machine makes the tightest-tolerance part	→	The same operator runs the same machine for years and nobody checks the settings	✗ 아니요	논의하기
Operators are paid on parts per hour	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ 아니요	논의하기
The same operator runs the same machine for years and nobody checks the settings	→	Customers changed their inspection method and never told us	✗ 아니요	논의하기
Batch traceability ends at the door	→	Coolant is changed when it smells, not on a schedule	✗ 아니요	논의하기
Operators are paid on parts per hour	→	Customers changed their inspection method and never told us	✗ 아니요	논의하기
Batch traceability ends at the door	→	Customers changed their inspection method and never told us	✗ 아니요	논의하기
Rework is not counted anywhere	→	The drawing on the floor is not the revision the customer ordered	✗ 아니요	논의하기
Operators are paid on parts per hour	→	The oldest machine makes the tightest-tolerance part	✗ 아니요	논의하기
Operators are paid on parts per hour	→	The same operator runs the same machine for years and nobody checks the settings	✗ 아니요	논의하기
The oldest machine makes the tightest-tolerance part	→	Rework is not counted anywhere	✗ 아니요	논의하기
Temperature in the shop swings fifteen degrees between morning and afternoon	→	The same operator runs the same machine for years and nobody checks the settings	✗ 아니요	논의하기
Batch traceability ends at the door	→	Operators are paid on parts per hour	✗ 아니요	논의하기
Temperature in the shop swings fifteen degrees between morning and afternoon	→	Customers changed their inspection method and never told us	✗ 아니요	논의하기
Coolant is changed when it smells, not on a schedule	→	The drawing on the floor is not the revision the customer ordered	✗ 아니요	논의하기
Operators are paid on parts per hour	→	Batch traceability ends at the door	✗ 아니요	논의하기
The oldest machine makes the tightest-tolerance part	→	Operators are paid on parts per hour	✗ 아니요	논의하기
Quotes are won on price, so cycle times are cut to the bone	→	The drawing on the floor is not the revision the customer ordered	✗ 아니요	논의하기
The oldest machine makes the tightest-tolerance part	→	The drawing on the floor is not the revision the customer ordered	✗ 아니요	논의하기
Temperature in the shop swings fifteen degrees between morning and afternoon	→	Rework is not counted anywhere	✗ 아니요	논의하기
Operators are paid on parts per hour	→	Quotes are won on price, so cycle times are cut to the bone	✗ 아니요	논의하기
The oldest machine makes the tightest-tolerance part	→	Quotes are won on price, so cycle times are cut to the bone	✗ 아니요	논의하기
The oldest machine makes the tightest-tolerance part	→	Batch traceability ends at the door	✗ 아니요	논의하기
Rework is not counted anywhere	→	Operators are paid on parts per hour	✗ 아니요	논의하기
Coolant is changed when it smells, not on a schedule	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ 아니요	논의하기
The same operator runs the same machine for years and nobody checks the settings	→	Batch traceability ends at the door	✗ 아니요	논의하기
Coolant is changed when it smells, not on a schedule	→	The same operator runs the same machine for years and nobody checks the settings	✗ 아니요	논의하기
Quotes are won on price, so cycle times are cut to the bone	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ 아니요	논의하기
The same operator runs the same machine for years and nobody checks the settings	→	Rework is not counted anywhere	✗ 아니요	논의하기
Customers changed their inspection method and never told us	→	The same operator runs the same machine for years and nobody checks the settings	✗ 아니요	논의하기
Rework is not counted anywhere	→	Coolant is changed when it smells, not on a schedule	✗ 아니요	논의하기
Rework is not counted anywhere	→	The same operator runs the same machine for years and nobody checks the settings	✗ 아니요	논의하기
The drawing on the floor is not the revision the customer ordered	→	Operators are paid on parts per hour	✗ 아니요	논의하기
The same operator runs the same machine for years and nobody checks the settings	→	The oldest machine makes the tightest-tolerance part	✗ 아니요	논의하기
Operators are paid on parts per hour	→	Coolant is changed when it smells, not on a schedule	✗ 아니요	논의하기
The same operator runs the same machine for years and nobody checks the settings	→	Coolant is changed when it smells, not on a schedule	✗ 아니요	논의하기
The oldest machine makes the tightest-tolerance part	→	Customers changed their inspection method and never told us	✗ 아니요	논의하기
Batch traceability ends at the door	→	The same operator runs the same machine for years and nobody checks the settings	✗ 아니요	논의하기
The drawing on the floor is not the revision the customer ordered	→	Temperature in the shop swings fifteen degrees between morning and afternoon	✗ 아니요	논의하기
Coolant is changed when it smells, not on a schedule	→	Operators are paid on parts per hour	✗ 아니요	논의하기
Customers changed their inspection method and never told us	→	Quotes are won on price, so cycle times are cut to the bone	✗ 아니요	논의하기
Temperature in the shop swings fifteen degrees between morning and afternoon	→	The drawing on the floor is not the revision the customer ordered	✗ 아니요	논의하기
Batch traceability ends at the door	→	Rework is not counted anywhere	✗ 아니요	논의하기
Batch traceability ends at the door	→	The drawing on the floor is not the revision the customer ordered	✗ 아니요	논의하기
Quotes are won on price, so cycle times are cut to the bone	→	The same operator runs the same machine for years and nobody checks the settings	✗ 아니요	논의하기
Deburring is done by whoever is free	→	Setup sheets are in the setter's head, not on paper	✗ 아니요	논의하기
Deburring is done by whoever is free	→	First-off inspection is skipped when the job is late	✗ 아니요	논의하기
New jobs are quoted from the last similar job, not from the drawing	→	First-off inspection is skipped when the job is late	✗ 아니요	논의하기
Deburring is done by whoever is free	→	…	✗ 아니요	논의하기
First-off inspection is skipped when the job is late	→	…	✗ 아니요	논의하기
The customer's returns log and ours do not match	→	…	✗ 아니요	논의하기
Setup sheets are in the setter's head, not on paper	→	Maintenance is done when a machine stops	✗ 아니요	논의하기
…	→	…	✗ 아니요	논의하기
Maintenance is done when a machine stops	→	Deburring is done by whoever is free	✗ 아니요	논의하기
The customer's returns log and ours do not match	→	Maintenance is done when a machine stops	✗ 아니요	논의하기
Setup sheets are in the setter's head, not on paper	→	…	✗ 아니요	논의하기
Deburring is done by whoever is free	→	Tool wear is judged by ear	✗ 아니요	논의하기
…	→	Parts that pass our inspection fail the customer's	✗ 아니요	논의하기
Tool wear is judged by ear	→	New jobs are quoted from the last similar job, not from the drawing	✗ 아니요	논의하기
New jobs are quoted from the last similar job, not from the drawing	→	…	✗ 아니요	논의하기
The customer's returns log and ours do not match	→	First-off inspection is skipped when the job is late	✗ 아니요	논의하기
…	→	New jobs are quoted from the last similar job, not from the drawing	✗ 아니요	논의하기
Setup sheets are in the setter's head, not on paper	→	Tool wear is judged by ear	✗ 아니요	논의하기
The customer's returns log and ours do not match	→	Parts that pass our inspection fail the customer's	✗ 아니요	논의하기
Parts that pass our inspection fail the customer's	→	Deburring is done by whoever is free	✗ 아니요	논의하기
Tool wear is judged by ear	→	Maintenance is done when a machine stops	✗ 아니요	논의하기
…	→	Tool wear is judged by ear	✗ 아니요	논의하기
First-off inspection is skipped when the job is late	→	Deburring is done by whoever is free	✗ 아니요	논의하기
…	→	The customer's returns log and ours do not match	✗ 아니요	논의하기
Tool wear is judged by ear	→	Parts that pass our inspection fail the customer's	✗ 아니요	논의하기
The customer's returns log and ours do not match	→	Tool wear is judged by ear	✗ 아니요	논의하기
Tool wear is judged by ear	→	…	✗ 아니요	논의하기
Maintenance is done when a machine stops	→	Setup sheets are in the setter's head, not on paper	✗ 아니요	논의하기
First-off inspection is skipped when the job is late	→	Maintenance is done when a machine stops	✗ 아니요	논의하기
The customer's returns log and ours do not match	→	Deburring is done by whoever is free	✗ 아니요	논의하기
Parts that pass our inspection fail the customer's	→	Tool wear is judged by ear	✗ 아니요	논의하기
Parts that pass our inspection fail the customer's	→	Setup sheets are in the setter's head, not on paper	✗ 아니요	논의하기
The customer's returns log and ours do not match	→	Setup sheets are in the setter's head, not on paper	✗ 아니요	논의하기
Setup sheets are in the setter's head, not on paper	→	Deburring is done by whoever is free	✗ 아니요	논의하기
Parts that pass our inspection fail the customer's	→	Maintenance is done when a machine stops	✗ 아니요	논의하기
First-off inspection is skipped when the job is late	→	Parts that pass our inspection fail the customer's	✗ 아니요	논의하기
The customer's returns log and ours do not match	→	…	✗ 아니요	논의하기
Tool wear is judged by ear	→	Setup sheets are in the setter's head, not on paper	✗ 아니요	논의하기
Maintenance is done when a machine stops	→	First-off inspection is skipped when the job is late	✗ 아니요	논의하기
…	→	Setup sheets are in the setter's head, not on paper	✗ 아니요	논의하기
Setup sheets are in the setter's head, not on paper	→	Parts that pass our inspection fail the customer's	✗ 아니요	논의하기
Deburring is done by whoever is free	→	…	✗ 아니요	논의하기
…	→	Maintenance is done when a machine stops	✗ 아니요	논의하기
Maintenance is done when a machine stops	→	Tool wear is judged by ear	✗ 아니요	논의하기
New jobs are quoted from the last similar job, not from the drawing	→	Deburring is done by whoever is free	✗ 아니요	논의하기
Tool wear is judged by ear	→	The customer's returns log and ours do not match	✗ 아니요	논의하기
Deburring is done by whoever is free	→	Maintenance is done when a machine stops	✗ 아니요	논의하기
New jobs are quoted from the last similar job, not from the drawing	→	Parts that pass our inspection fail the customer's	✗ 아니요	논의하기
Parts that pass our inspection fail the customer's	→	New jobs are quoted from the last similar job, not from the drawing	✗ 아니요	논의하기
The customer's returns log and ours do not match	→	New jobs are quoted from the last similar job, not from the drawing	✗ 아니요	논의하기
…	→	Setup sheets are in the setter's head, not on paper	✗ 아니요	논의하기
First-off inspection is skipped when the job is late	→	New jobs are quoted from the last similar job, not from the drawing	✗ 아니요	논의하기
…	→	Maintenance is done when a machine stops	✗ 아니요	논의하기
Parts that pass our inspection fail the customer's	→	…	✗ 아니요	논의하기
First-off inspection is skipped when the job is late	→	Setup sheets are in the setter's head, not on paper	✗ 아니요	논의하기
…	→	…	✗ 아니요	논의하기
New jobs are quoted from the last similar job, not from the drawing	→	Setup sheets are in the setter's head, not on paper	✗ 아니요	논의하기
New jobs are quoted from the last similar job, not from the drawing	→	Tool wear is judged by ear	✗ 아니요	논의하기
Maintenance is done when a machine stops	→	Parts that pass our inspection fail the customer's	✗ 아니요	논의하기
First-off inspection is skipped when the job is late	→	The customer's returns log and ours do not match	✗ 아니요	논의하기
Maintenance is done when a machine stops	→	New jobs are quoted from the last similar job, not from the drawing	✗ 아니요	논의하기
Maintenance is done when a machine stops	→	…	✗ 아니요	논의하기
First-off inspection is skipped when the job is late	→	Tool wear is judged by ear	✗ 아니요	논의하기
New jobs are quoted from the last similar job, not from the drawing	→	…	✗ 아니요	논의하기
…	→	Tool wear is judged by ear	✗ 아니요	논의하기
Deburring is done by whoever is free	→	New jobs are quoted from the last similar job, not from the drawing	✗ 아니요	논의하기
Parts that pass our inspection fail the customer's	→	First-off inspection is skipped when the job is late	✗ 아니요	논의하기
…	→	First-off inspection is skipped when the job is late	✗ 아니요	논의하기
…	→	First-off inspection is skipped when the job is late	✗ 아니요	논의하기
…	→	Parts that pass our inspection fail the customer's	✗ 아니요	논의하기
Setup sheets are in the setter's head, not on paper	→	First-off inspection is skipped when the job is late	✗ 아니요	논의하기
First-off inspection is skipped when the job is late	→	…	✗ 아니요	논의하기
Tool wear is judged by ear	→	…	✗ 아니요	논의하기
New jobs are quoted from the last similar job, not from the drawing	→	The customer's returns log and ours do not match	✗ 아니요	논의하기
Tool wear is judged by ear	→	First-off inspection is skipped when the job is late	✗ 아니요	논의하기
…	→	The customer's returns log and ours do not match	✗ 아니요	논의하기
…	→	Deburring is done by whoever is free	✗ 아니요	논의하기
Setup sheets are in the setter's head, not on paper	→	…	✗ 아니요	논의하기
…	→	New jobs are quoted from the last similar job, not from the drawing	✗ 아니요	논의하기
Setup sheets are in the setter's head, not on paper	→	The customer's returns log and ours do not match	✗ 아니요	논의하기
New jobs are quoted from the last similar job, not from the drawing	→	Maintenance is done when a machine stops	✗ 아니요	논의하기
Maintenance is done when a machine stops	→	…	✗ 아니요	논의하기
Parts that pass our inspection fail the customer's	→	…	✗ 아니요	논의하기